• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.19-29
• /
• 2019

Recently, with the rise of environmental issues and the change of government policy (Renewable Energy 3020 Implementation Plan), a large amount of renewable energy such as solar and wind power is connected to the power system, and most of the renewable energy is concentrated in the power distribution network. This causes many problems with the voltage management and the protection coordination of the grid due to the its intermittent power generation. In order to effectively operate the distribution network, it is necessary to deploy more intelligent terminal devices in the field to measure the status of the distribution network and develop various operation functions such as visualization and big data analysis to support the power distribution system operators. In addition, the failover technology must be supported for the non-stop operation of the power distribution system. This paper proposes the system architecture of new power distribution management system to cope with high penetration of renewable energy. To verify the proposed system architecture, the functional unit test and performance measurement were performed.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.4
• /
• pp.139-143
• /
• 2006

Recently, standard of living improved and Information-Communication industry developed rapidly. Thereby, interest about electric power quality is rising worldwide. So, research and Development to enhance electric power quality in various viewpoint until most suitable supply system from each kind device to improve electric power quality. And specially, interest about voltage quality is rising by diffusion increase of information communication appliance and minuteness control appliance etc. Also Power consumption is increasing, but expansion of large size generator by environmental and site security problem is difficult. So, introduction of distribution generation is investigated actively by electric-power industry reorganization. Voltage management of power system had been controlled by ULTC (Under Load Tap Changer) in substation and pole transformer on the high voltage distribution line. But, voltage control device on substation and distribution line is applied each other separatively. Therefore, efficiency of line voltage control equipment is dropping. Also, research about introduction upper limit of distribution generation is consisting continuously. This paper presents cooperation use way between voltage control device and introduction upper limit of distribution generation for most suitable voltage control in distribution power system.

• Journal of Distribution Science
• /
• v.21 no.6
• /
• pp.13-20
• /
• 2023

Purpose: This research explores the development of music business distribution channels to attract potential customers based on the current and prior literature. As a result, the research will provide solutions for practitioners in the music distribution channel how they create effective channel in new industry phase which has experienced significant changes due to technological advancement and consumer behavior. Research design, data, and methodology: To obtain textual data in the literature storage, the author conducted content analysis. Even though there are numerous textual resources, selecting only high-quality text data that is only peer-reviewed journal articles and books consistently indicate a high degree of reliability and validity to keep the advantage form content analysis approach. Results: The present study figured out that there are five strategies to attract potential consumers in the music distribution channel, such as (1) 'Marketing Mix', (2) 'Streaming Platforms and Online Music Stores', (3) 'Brick and Mortar Stores and Concerts, and Events', (4) 'Platforms Exclusives and Limited-Edition Merchandise', and 'Partnerships and collaborations. Conclusions: In sum, the practitioners need to consider include building relationships with the fans, studying and understanding their target market, utilizing multiple available distribution channels, embracing new technologies, and analyzing the effectiveness of the adopted distribution channels.

• Journal of Distribution Science
• /
• v.21 no.10
• /
• pp.85-95
• /
• 2023

Purpose: Virtual reality's impact on fashion distribution extends beyond singular transactions, facilitating the emergence of novel collaborations. As investigating the characteristics of fashion distribution channels in virtual reality, this study explores how the fashion industry can utilize virtual reality distribution channels to their maximum capacity while minimizing potential disadvantages. Research design, data, and methodology: The approach used to gather previous studies for this study adheres to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) methodology. This method is widely acknowledged and recommended for its systematic and transparent approach to selecting relevant literature. This kind of literature search plays a vital role in a systematic evaluation as it informs the results. Results: The finding indicates consistently a total of eight kinds of characteristics of fashion distribution channels in virtual reality. The result means that the attributes of fashion distribution channels in virtual reality are causing significant changes in the fashion industry, revolutionizing the consumer experience, and redefining the parameters of creativity and collaboration. Conclusions: In sum, the global reach and accessibility of modern technology enhance the capacity of fashion companies to expand their market presence. This facilitates their participation in intercultural interactions and allows them to serve a wide range of customers.

• Journal of Distribution Science
• /
• v.17 no.11
• /
• pp.73-79
• /
• 2019

Purpose: The purpose of this study was evaluated to compare the predictive power of distress prediction models by using discriminant analysis method and logit analysis method for food service franchise industry in Korea. Research design, data and methodology: Forty-six food service franchise industry with high sales volume in the 2017 were selected as the sample food service franchise industry for analysis. The fourteen financial ratios for analysis were calculated from the data in the 2017 statement of financial position and income statement of forty-six food service franchise industry in Korea. The fourteen financial ratios were used as sample data and analyzed by t-test. As a result seven statistically significant independent variables were chosen. The analysis method of the distress prediction model was performed by logit analysis and multiple discriminant analysis. Results: The difference between the average value of fourteen financial ratios of forty-six food service franchise industry was tested through t-test in order to extract variables that are classified as top-leveled and failure food service franchise industry among the financial ratios. As a result of the univariate test appears that the variables which differentiate the top-leveled food service franchise industry to failure food service industry are income to stockholders' equity, operating income to sales, current ratio, net income to assets, cash flows from operating activities, growth rate of operating income, and total assets turnover. The statistical significances of the seven financial ratio independent variables were also confirmed by logit analysis and discriminant analysis. Conclusions: The analysis results of the prediction accuracy of each distress prediction model in this study showed that the forecast accuracy of the prediction model by the discriminant analysis method was 84.8% and 89.1% by the logit analysis method, indicating that the logit analysis method has higher distress predictability than the discriminant analysis method. Comparing the previous distress prediction capability, which ranges from 75% to 85% by discriminant analysis and logit analysis, this study's prediction capacity, which is 84.8% in the discriminant analysis, and 89.1% in logit analysis, is found to belong to the range of previous study's prediction capacity range and is considered high number.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.59-84
• /
• 2011

The purpose of this study is to analyze the spatial distribution and the linkage characteristics of the warehousing industry in Busan and to provide the policy implications for the warehousing industry in Korean port hinterland. We surveyed the warehousing firms in Busan. Categorizing the warehousing industry into industry types, sizes, and organization types on the basis of the survey, we attempted the point pattern analysis and the proximity analysis using the GIS. The warehousing industry in Busan had changed from a small single-unit firm to a medium or a large firm with a head office or branches. These were distributed in hinterland of North Harbor, South Harbor & Gamcheon Harbor, and Sin-Pyoung & Jang-Rim industrial complex and Sasang Industrial Complex constituting the spatial agglomeration. The warehousing industry in Busan formed the linkages with other sectors of the same logistics to provide manufacturing industries with various other services as well as storage services. The linkages were largely formed in the local scope with spatial proximity, generating the economic gains of agglomeration, which were transformed into the efficiency of the warehousing industry in the local scope to gradually expand the spatial dimensions of the linkages.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.57-70
• /
• 2013

Purpose - The objective of this paper is to explain the successful methods for the revitalization of distribution and logistics of the least developed FEZs (Saemangum, Yellow-sea, and Deagu-Kyengbuk) in Korea. With the recent changes in the economic terrain of Northeast Asia as with the rise of China, Korea has developed a logistics hub concept for improving the efficiency of logistics and distribution industry and its distribution and logistics policy has received positive worldwide evaluation. Therefore, we face severe competition and must always look for ways to address these problems. Research design, Data, Methodology - This study adopts two methods to propose successful revitalization of distribution and logistics in the least developed FEZ. The first method investigates the limitation of these FEZs by analyzing the statutes, and the second one follows comparable cases. Thus, we first reviewed the efficient strategic political alternatives for the least developed FEZ, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk, through the relative institution system, law, and future plans. Next, we studied the Bin-hai Economic Free Section (Zone) in China as a comparable example. In order to analyze the competitiveness of logistics in the three FEZs (Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk), the total factor productivity growth of regional manufacturing industries is divided into three sources: the external trade effect, scale effect, and technical change effect. However, this paper does not test for a positive contribution of external trade, which is a reason of non-building on these FEZs. A FEZ that shows a larger external trade effect than the others will have a comparative advantage in the logistics infrastructure and policy support. This study presented the newly applied Bin-hai FEZ in China, in order to make the studied FEZ as successful by applying the strategy of its distribution and logistics center. Results - In Korea, there is an increased focus on the benefit of the regional development of regions such as the Free Economic Zones (FEZ). We have six FEZs, Inchon, Busan-Jinhae, Guangyang, Yellow-sea, Seamangum-Gunsan, and Deagu-Kyeongbuk. However, our FEZs do not have various supporting factors needed for the logistics and distribution industry. Korea designated the above six places as FEZ and has operated to enhance national competitiveness and ensure a balanced regional development since 2003. However, most FEZs did not receive favorable feedback in the first business performance evaluation and it is necessary to take action for substantial improvements. Conclusions - Especially, over the past 10 years, even though the FEZ policy has been implemented in an effort to promote success in distribution and logistics, there are still many underdeveloped industries in logistics. The main problem is the absence of revitalization of the high value added performance in the distribution and logistics industry. However, there is a limitation to this study. We have used non-empirical method based on a case study to arrive at our findings. Future studies should use appropriate statistical methods to supplement our results and provide a solution to this problem.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2003.05a
• /
• pp.215-224
• /
• 2003

• Journal of Distribution Science
• /
• v.12 no.7
• /
• pp.23-35
• /
• 2014

Purpose - This study aims to explore the effects of social responsibility activities and business ethics practices on corporate trust and loyalty in the context of a large retail distribution business. Research design, data, and methodology - The data collected was analyzed using PASW Statistics 18.0. In order to verify the demographic characteristics, frequency analysis was conducted on the data. Results - The results of the study were as follows. First, social responsibility activities had a significant effect on corporate trust. Second, both corporate social responsibility activities and business ethics practices had significant effects on loyalty. Third, corporate trust had a significant effect on loyalty. Fourth, corporate social responsibility activities and consumer protection activities had a partial mediation effect, while environmental protection activities and social contribution activities had complete mediation effects. Conclusions - This study clarified and explained the factors of corporate social responsibility activities and business ethics practices that customers value, and analyzed the influence of these factors on corporate trust and loyalty.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.53-61
• /
• 2001

This study was carried out to evaluate the effect of coating pigments on the printability by investigating the pore structure of casting layer such as the number, size and distribution of pores and the pore rate. The coating structure was mainly determined by the interaction between pigment and binder. It means that the structure of pores was chiefly affected by the shape and size distribution of pigments and their packing rate. The physical properties of pore have close relationships with ink set-off, the speed of ink penetration and printing gloss. The results suggested that the rate and number of pores were greatly affected by the particle size distribution and shape of pigments. The rate of pore increased with the reduction of particle size distribution of pigments. Calcite was effective to improve greatly the printability of coated paper.