• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.215-216
• /
• 2005

To decrease and remove of much noises that is detected in PD (partial discharge) measuring test. we forced on detection of those. We made W-LC filter for measuring PD. which adapted that to field test. We tested after design laboratory circumstances like field line. and then the phase change properties of detected signal in UHF sensor were measured by Lemke Probe and oscilloscope (TDS-3054. Tektronix). Eventually we checked decrement of noises from experimental result. Also from experimental result at the joint box of 22.9[kV] distribution line. we obtained reasonable data which enable noises to decrease. Hereafter those results will be adapted at ultra-high voltage for trouble prevention and on-line cable watch. diagnosis of those.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.301-310
• /
• 2013

For analyzing sand grain size, a specialized high-priced instrument has been used, such as sieve shaker, video camera, laser particle size analyzer, and microscope. Among these, the sieve shaker is commonly used because it is not only cheaper than others but also provides reasonable accuracy. However, it takes a long time and makes lots of dust and noise. In this study, a cheaper and easier method which can replace the sieve shaker is proposed. By using a commercial flat-bed scanner and a darkroom box, the sand size distribution can be analyzed. The darkroom box makes sand images clear and protects the glass of the scanner from being scratched. Comparison between the present method and sieve analysis shows that the present method not only has an accuracy comparable to the sieve analysis but also can save time and effort.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.396-405
• /
• 2001

Usually it is difficult to extract facial regions in a complex image by using only a predetermined skin color. Expecially, it is more difficult to separate them from background regions that contains the skin color. This paper proposes a face detection method by using gradual range expansion of an initial skin color. By analyzing the skin color distribution several images that are collected in the Web, the range of dense distribution is selected as the range of the initial skin color. In each expanding step, expanded regions in the image are tested whether they can be actual facial regions by using the information of the shape of general face and the location of face organs. The shape of general face is modeled as an ellipse and the aspect ratio of its bounding box is used to define the shape constraint for faces. Only the eyes and lips are used as the face organs, which can be easily detected by extracting horizontal edges in the expanded regions. through several experiments, it is confirmed that the proposed method can detect exactly not only faces having partly distorted regions by highlight but also faces neighboring similar color regions.

• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.49-55
• /
• 2007

Software failure time presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing. For data analysis of software reliability model, data scale tools of trend analysis are developed. The methods of trend analysis are arithmetic mean test and Laplace trend test. Trend analysis only offer information of outline content. From the subdivision of this analysis, new attemp needs the side of the quality control. In this paper, we discuss process capability analysis using process capability indexs. Because of software failure interval time is pattern of nonnegative value, instead of capability analysis of suppose to normal distribution, capability analysis of process distribution using to Box-Cox transformation is attermpted. The used software failure time data for capability analysis of process is SS3, the result of analysis listed on this chapter 4 and 5. The practical use is presented.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.467-476
• /
• 2008

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (RRS) with an exergetic equivalent cooling power of 9 kW at 4.5 K without liquid nitrogen ($LN_2$) pre-cooling has been manufactured and installed. The main components of the KST AR helium refrigeration system (HRS) can be classified into the warm compression system (WCS) and the cryogenic devices according to the operating temperature levels. The process helium is compressed from 1 bar to 22 bar passing through the WCS and is supplied to cryogenic devices. The main components of cryogenic devices are consist of cold box (C/B) and distribution box (D/B). The C/B cool-down and make the various cryogenic helium for the KSTAR Tokamak and the various cryogenic helium is distributed by the D/B as per the KSTAR requirement. In this proceeding, we will present the commissioning results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• Asia Marketing Journal
• /
• v.15 no.1
• /
• pp.43-55
• /
• 2013

Since movies are experience goods, consumers are easily influenced by other consumers' behavior. For moviegoers, box office rank is the most credible and easily accessible information. Many studies have found that the relationship between a movie's box office rank and its revenue departs from the Pareto distribution, and this phenomenon has been named "increasing returns to information." The primary objective of the current research is to apply the empirical model proposed by De Vany and Walls (1996) to the Korean movie market in order to examine whether the same phenomenon prevails in the Korean movie market. The other purpose of the present study is to provide managers with useful implications about the release timing of a movie by finding different curvatures that depend upon seasonality. The empirical test on the Korean movie market shows similar results as prior studies conducted on the U.S., Hong Kong, and U.K. movie markets. The phenomenon of increasing returns is generated by information transmission among consumers, which makes some movies become blockbusters and others bombs. The proposed model can also be interpreted in such a way that a change in the rank has a nonlinear effect on the movie's performance. If a movie climbs up the chart, it would be rewarded more than its proportion. On the other hand, if a movie falls down in the ranks, its performance would drop rapidly. The research result also indicates that the phenomenon of increasing returns occurs differently depending on when the movies are released. Since the tendency of the increasing returns to information is stronger during the peak seasons, movie marketers should decide upon the release timing of a movie based on its competitiveness. If a movie has substantial potential to incur positive word-of-mouth, it would be more reasonable to release the movie during the peak season to enjoy increasing returns. Otherwise, a movie should be released during the low season to minimize the risk of being dropped from the chart.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.1
• /
• pp.118-124
• /
• 2011

The purpose of this study was to evaluate the menu of meal boxes delivered to low-income children during summer vacation. Out of 114 questionnaires distributed nationwide concerning lunch menus during summer vacation of 2008, 51 (44.7% response rate) were returned. A total of 170 daily lunch menus consisting of 5 day menus from 34 organizations (29.8% analysis rate) were analyzed after excluding 16 organizations that delivered side dishes only and one organization that provided menus of less than 5 days. The mean numbers of dishes and food items in the menus were five and eight, respectively. Over two-thirds (67.1%) of the lunch box menus included only three food groups: grain, meat and vegetable. Only 2% of the menus included all five food groups, grain, meat, vegetable, fruit, and dairy products. In general, the menus tended to lack fruits and dairy products; the percentages of the menus not including fruits and dairy products reached 89% and 77%, respectively. The average number of dishes, distribution of food group patterns, and average dietary diversity scores of the menus were significantly different according to reimbursement rate. The organizations receiving reimbursement of 3,500 won were more likely to include diverse food groups than those receiving 3,000 won although most of the menus were not proper in terms of food diversity anyway. These results suggest that lunch box menus for low-income children can be improved, in particular, by including more diverse food groups.

• Communications of Mathematical Education
• /
• v.25 no.3
• /
• pp.607-627
• /
• 2011

The purpose of this study is to analyse teaching and learning effects of the structural-mapping used instruction and to find out the characteristics of problem solving process in permutation and combination. For this study, two classes of 11th grade students(67 students) were randomly selected from S high school in D city. One of them was assigned to the experimental group and the other to the control group, respectively. Four lectures of the structural-mapping used instruction were carried out in the experimental group and same amount of lectures of the text book oriented instruction were carried out in the control group. The research findings are as follows. First, the structural-mapping used instruction is shown to be more effective in achievement than the traditional textbook-oriented instruction. Second, the ball-box model is found out to be easier and simpler than the selection-distribution model. Third, students who used the ball-box model are properly able to use both model.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.117-127
• /
• 2007

In this study, we evaluate the strength of steel box beam-to-column connections subjected to axial loads in steel frame piers. The T-connection strength was reduced due to the column axial force in the two-story pier structure. To examine this phenomenon, non-linear FEM analysis was carried out and the analytical procedure was verified by comparing it with experimental results. To clarify the effect of the axial force and major design parameters in connection with strength, influence of panel zone width-thickness ratio, sectional area, and axial force was investigated using FEM analysis. Also, the theoretical strength equations were suggested by stress distribution of panel zone. The strength of the T-connection was compared with one of the one-story pier structure connections. As a result, the strength evaluation equations are proposed in consideration of the panel zone width-thickness ratio and sectional area ratio for the T-connections.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.3-14
• /
• 1995

The broadband input impedance, the input power and the radiation pattern of the monopole antenna attached to the handy phone operated at 800MHz are calculated by using the Finite Difference Time Domain(FDTD) Method. For the FDTD analysis of frequency characteristics of monopole antenna, the handy phone is modeled with the geometry that the monopole antenna is connected to a conducting box, and the modified FDTD algorithm[11] used the thin wire appproximation method and the Maxwell's integral equation from the original Yee algorithm is applied for the analysis of the wire structure. Also, by means of finding the current distribution directly from circumferencial magnetic filelds around the monopole antenna and the conducting box, the radiation pattern is calculated to observe the influence of the conducting box, and is compared with the results of the known mothod for the FDTD calculation of radiation pattern, For the experiments, the handy phone of which full length including antenna is .lambda. $\lambda$/2 is manufactured and we confirm that all computation results are agree well with the mea- sured values.