• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.290-296
• /
• 2011

Titanium carbonitride is more perspective materials compared to titanium carbide. It can be used in tool industry and special products because of its higher strength, abrasive wear-resistance and especially its strong chemical stability at high temperatures. We produced STS+TiCxNy composite by the spark plasma sintering for higher strength and studied the characteristics. The planar and cross-sectional microstructures of the specimens were observed by scanning electron microscopy. Characterizations of the carbon and nitride phases on the surface of composite were carried out using an X-ray diffractometer. During annealing TiCxNy particles diffusion into STS 430 was observed. After annealing, sintering isolations between particles were formed. It causes decreasing of mechanical strength. In addition when annealing temperature was increased hardness increased. Heterogeneous distribution of alloying elements particles was observed. After annealing composites, highest value of hardness was 738.1 MHV.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.3
• /
• pp.74-80
• /
• 2001

Due to floating marine debris, seabed litters, dead shellfishes and polluted sediments, etc. , which are mainly caused by fishery activities in a large scale around the coastline, expansion of industrialized areas from economic development and drastic increase of free time by the improved standard of living, Korean coast is believed to be cast beyond the self purification of marine ecosystem. Seabed litters, if not remedied in a timely manner, will eventually lead to the overall disorder of benthic ecosystem. Thus, in order to prevent marine ecosystem from being thrown into confusion by seabed litters and to restore ocean environments, it is reasonable to investigate the current status of the seabed litters by carrying out an extensive examination on them and to equip ourselves for marine debris with an systemized tool that provides supports to the building process of an efficient methodology of litters disposal through managing related data appropriately. As an primary step to this goal, a systematic method of investigation is presented in this paper. With this methodology, the present state of the seabed titters is properly understood for the specified list of ports.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.46-53
• /
• 2006

Magnetocardiography(MCG) has been proposed as a novel and non-invasive diagnostic tool for the detection of cardiac electrical abnormality associated with myocardial ischemia. In our previous study, we have proposed a new classification method of MCG parameters, based on the different populations of the parameters between coronary artery disease(CAD) patients, symptomatic patients and healthy volunteers. We used four parameters, representing the directional changes of the electrical activity in the period of an R-ST-T interval. In patients with chest pain and without ST-segment elevation, who were selected consecutively from all patients admitted to the hospital in 2004, the patients with CAD could be classified with a higher sensitivity than conventional methods, showing that the proposed method can be useful for the diagnosis of CAD with MCG. In this study, we examined the validity of the algorithm with the prior probability distribution in diagnosis of new patients admitted to the hospital in 2005. In the results, presence of CAD could be found with sensitivity and specificity of 81.3% and 71.4%, respectively, in patients with chest pain and non-diagnostic ECG findings.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.51-57
• /
• 2010

Brittle microstructure created in a heat affected zone (HAZ) during the welding of low alloy steel can be eliminated by post-weld heat treatment (PWHT). If the PWHT is not possible during a repair welding, the controlled bead depositions of multi-pass welding should be applied to obtain tempering effect on the HAZ without PWHT. In order to anticipate and control the tempering effect during the temper bead welding, the definition of temperature curve obtained from the analytical solution was suggested in this research. Because the analytical solution for heat flow is expressed as a mathematical equation of weld parameters, it may be effective in anticipating the effect of each weld parameter on the tempering in HAZ during the successive bead depositions. The reheating effect by the successive bead layer on the brittle coarse grained HAZ formed by earlier bead deposition was estimated by comparing the overlapped distance between the temperature curves in the HAZ. Three layered weld specimens of SA508 base metal with A52 filler were prepared by controlling heat input ratio between layers. The tempering effect anticipated by using the overlapped distance between the temperature curves was verified by measuring the micro-hardness distribution in the HAZ of prepared specimens. The temperature curve obtained from analytical solution was expected as a good tool to find optimal temper bead welding conditions.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.392-404
• /
• 2020

The focus of this study was to quantify the thermal stratification and analyze the relationship between the stratification structure and the tributaries to understand flow variations in the Paldang Reservoir. The vertical distribution of the temperature and density gradients, and the depth and thickness of the thermocline were quantitatively calculated using a lake physics tool (rLakeAnalyzer) and high-frequency monitoring data. Based on a density gradient of 0.2 kg/㎥/m, the thermocline was formed from mid-May to early-September 2019 and the other periods were weakly stratified or mixed. The thickness of the thermocline was developed until 4.7 m and the depth of the thermocline was formed at a depth of 3 - 6 m at the front of the Paldang Reservoir. During the formation of the thermocline, the Namhangang and Gyeongancheon tributaries with relatively high water temperature (low-density) flowed into the upper layer of the reservoir, and the Bukhangang tributary with low water temperature (high-density) mainly affected the lower layer of the reservoir. This is because the density currents were formed due to the difference in the water temperature of the tributaries. The findings of this study may be used for constructing high-frequency monitoring and quantitative data analyses of reservoirs.

• The Korean Journal of Nuclear Medicine
• /
• v.23 no.2
• /
• pp.149-154
• /
• 1989

Transient ischemic attacks (TIAs) is a syndrome resulting from brain ischemia lasting less than 24 hours. The mechanisms of TIAs may be similar to those of cerebral embolism and thrombosis, and thus TIAs may be followed by cerebral infarction. Despite the availability of CT scanning, the diagnosis and management of TIAs continue to be difficult. Recently SPECT has been advocated as a diagnostic imaging modality. We performed Tc-99m-HMPAO regional cerebral blood flow (rCBF) SPECT in 24 patients with the clinical diagnosis of TIAs to assess its ability to detect early changes of rCBF, and determine the diagnostic value. Ten men and fourteen women with an average of 51 years (range; 27-74 years) were included. All but 8 patients had normal brain CT prior to SPECT. The two patients had moderate degree of brain atrophy and the 6 patients nonspecific calcifications. Eighteen of the 24 patients had abnormal Tc-99m-HMPAO rCBF SPECT. Fifteen had unilateral involvement and the other three had bilateral involvements. Seventy-five percents of the defects were found in the left cerebral hemisphere. According to the distribution of the lesions (total number: 34 lesions), fourteen were in the parietal, eight in the temporal, and the remainders were elsewhere. Tc-99m-HMPAO rCBF SPECT is sensitive in detecting rCBF abnormalities in patients with TIAs, and represent the most accurate diagnostic tool available in the diagnosis of TIAs.

• Health Policy and Management
• /
• v.8 no.1
• /
• pp.1-14
• /
• 1998

Analysis of practice variations has been one of important issues in trying to contain costs as well as to manage quality in health care. This study was conducted to provide statistical model for analysing variations in inpatient costs by type of hospitals. Four K-DRGs including Cesarean section, appendectomy, cataract extraction, and pediatric pneumonia with CC class 0 were selected, and means and dispersions of inpatient procedure and operation costs were simultaneously compared between type of hospitals. The results indicated that joint modelling of means and dispersions by gamma distribution was a very useful analytic tool for identifying factors which might have relationship with variations in inpatient costs. This model can be expanded to test the significance of several independent variables in analysing cost variations. In surgical conditions, means and unit variations of procedure and operation costs showed consistent pattern which was tertiarty hospital, general hospital, and hospital in descending order. Different findings were identified in pediatric pneumonia, from which mean and unit variation of procedure and operation cost was the highest in general hospital. The practical implication of this difference could not be drawn from this study. It will be done by further sophisticated researches. In order to develop health policy for cost containment and quality management in Korea, it is essential to find out manageable factors affecting variations in practice patterns which include characteristics of population, providers, regions, and so on. The statistical model presented in this study will give health services researchers useful insights for future investigations in analysing cost variations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1465-1477
• /
• 1993

Powder Injection Molding(PM) is an advanced and complicated technology for manufacturing ceramic or metal products making use of a conventional injection molding process, which is generally used for plastic products. Among many technologies involved in the successful PIM, injection molding process is one of the key steps to form a desired shape out of powder/binder mixtures. Thus, it is of great importance to have a numerical tool to predict the powder injection molding filling process. In this regard, a finite element analysis system has been developed for numerical simulations of filling process of powder injection molding. Powder/polymer mixtures during the filling pro cess of injection molding can be rheologically characterized as Non-Newtonian fluids with a so called yield phenomena and have a peculiar feature of apparent slip phenomena on the wall boundaries surrounding mold cavity. Therefore, in the present study, a physical modeling of the filling process of powder/polymer mixtures was developed to take into account both the yield stress and slip phenomena and a finite element formulation was developed accordingly. The numerical analysis scheme for filling simulation is accomplished by combining a finite element method with control volume technique to simulate the movement of flow front and a finite difference method to calculate the temperature distribution. The present study presents the modeling, numerical scheme and some numerical analysis results showing the effect of the yield stress and slip phenomena.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.6
• /
• pp.439-446
• /
• 2007

In order to reduce the health inequalities within a society changes need to be made in broad health determinants and their distribution in the population. It has been expected that the Health impact assessment(HIA) and Healthy Cities can provide opportunities and useful means for changing social policy and environment related with the broad health determinants in developed countries. HIA is any combination of procedures or methods by which a proposed 4P(policy, plan, program, project) may be judged as to the effects it may have on the health of a population. Healthy city is one that is continually creating and improving those physical and social environments and expanding those community resources which enable people to mutually support each other in performing all the functions of life and in developing to their maximum potential. In Korea, social and academic interest regarding the HIA and Healthy Cities has been growing recently but the need of HIA and Healthy Cities in the perspective of reducing health inequality was not introduced adequately. So we reviewed the basic concepts and methods of the HIA and Healthy Cities, and its possible contribution to reducing health inequalities. We concluded that though the concepts and methods of the HIA and Healthy Cities are relatively new and still in need of improvement, they will be useful in approaching the issue of health inequality in Korea.

• Journal of Korea Water Resources Association
• /
• v.37 no.6
• /
• pp.499-507
• /
• 2004

In this study, the fully coupled SWAT-MODFLOW model is developed by using the type of embedment MODFLOW in SWAT. Since SWAT model has semi distributed features, its groundwater component can't consider distributed parameters such as hydraulic conductivity, storage coefficient and spatially variable natures such as distribution of groundwater heads and pumping rate and so forth. The main purpose of this study is to overcome these limitations. This linkage is completed considering the interaction between stream network and aquifer to reflect boundary flow. To correspond HRU in SWAT to grid in MODFLOW, HRU-GRID conversion tool using DEM is newly suggested. As groundwater recharge of MODFLOW can be estimated accurately by SWAT model, the reliability of groundwater discharge and total runoff of watershed could be greatly enhanced.