• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.870-878
• /
• 2003

The scale is removed from the strip by high pressure hydraulic descaling at the FSB (Finishing Scale Breaker). Recently, the spray height of nozzle has a trend to be shorter for the purpose of increasing the impact pressure by the high pressure water jet. Here, the nozzle intervals should be decided after considering the impact pressure and the temperature distribution on the strip. In other words, the minimum of impact pressure at the overlap of spray influences the surface grade of the strip due to scale and the overlap distance of the spray affects the temperature variation in the direction of the width of strip. In the present study, the impact pressure of the high pressure water jet is measured by the hydraulic descaling system and calculated with regard to the lead angle of 15$^{\circ}$ and the offset angle of 15$^{\circ}$, and then the temperature distribution and the temperature variation are calculated at the overlap distances of 0 mm, 10 mm, 20 mm, and 30 mm, respectively. The method of setting nozzle intervals is shown by utilizing these results.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.3940-3955
• /
• 2023

A new method of numerical simulating prediction and decontamination effect evaluation for abrasive jet decontamination to radioactively contaminated metal is proposed. Based on the Computational Fluid Dynamics and Discrete Element Model (CFD-DEM) coupled simulation model, the motion patterns and distribution of abrasives can be predicted, and the decontamination effect can be evaluated by image processing and recognition technology. The impact of three key parameters (impact distance, inlet pressure, abrasive mass flow rate) on the decontamination effect is revealed. Moreover, here are experiments of reliability verification to decontamination effect and numerical simulation methods that has been conducted. The results show that: ⁶⁰Co and other homogeneous solid solution radioactive pollutants can be removed by abrasive jet, and the average removal rate of Co exceeds 80%. It is reliable for the proposed numerical simulation and evaluation method because of the well goodness of fit between predicted value and actual values: The predicted values and actual values of the abrasive distribution diameter are Ф57 and Ф55; the total coverage rate is 26.42% and 23.50%; the average impact velocity is 81.73 m/s and 78.00 m/s. Further analysis shows that the impact distance has a significant impact on the distribution of abrasive particles on the target surface, the coverage rate of the core area increases at first, and then decreases with the increase of the impact distance of the nozzle, which reach a maximum of 14.44% at 300 mm. It is recommended to set the impact distance around 300 mm, because at this time the core area coverage of the abrasive is the largest and the impact velocity is stable at the highest speed of 81.94 m/s. The impact of the nozzle inlet pressure on the decontamination effect mainly affects the impact kinetic energy of the abrasive and has little impact on the distribution. The greater the inlet pressure, the greater the impact kinetic energy, and the stronger the decontamination ability of the abrasive. But in return, the energy consumption is higher, too. For the decontamination of radioactively contaminated metals, it is recommended to set the inlet pressure of the nozzle at around 0.6 MPa. Because most of the Co elements can be removed under this pressure. Increasing the mass and flow of abrasives appropriately can enhance the decontamination effectiveness. The total mass of abrasives per unit decontamination area is suggested to be 50 g because the core area coverage rate of the abrasive is relatively large under this condition; and the nozzle wear extent is acceptable.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.341-348
• /
• 2001

In this study, nonlinear vibration analysis of the cylindrical orthotropic porous thin plate under V-shaped tension distribution with wire impact damping is considered. We make dynamic model of the plate under the tension using commercial FEM code and reduce the number of its degrees of freedom using dynamic condensation. The dynamic model of wire is obtained as lumped mass model from string equation. And then we analyze the nonlinear vibration of the plate including the impact phenomenon between the plate and the wire using the reduced mass and stiffness matrices of the plate and lumped model of the wire. The contact phenomenon between them can be described by impact contact elements composed of contact stiffness coefficients from Hertzian contact theory and contact damping coefficients from restitution coefficient between them. And we discussed the results of nonlinear vibration analysis for variations of their design parameters.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.731-737
• /
• 2002

Nonlinear vibration of the CRT shadow mask with impact damping wires is analyzed in consideration of the mask tension distribution and the effect of wire impact damping. A reduced order FEM model of the shadow mask is obtained from dynamic condensation of the mass and stiffness matrices, and damping wire is modeled using the lumped parameter method to effectively describe its contact interactions with the shadow mask. The nonlinear contact-impact model is composed of spring and damper elements, of which parameters are determined from the Hertzian contact theory and the restitution coefficient, respectively. The analysis model of the shadow mask with damping wires is experimentally verified through impact tests of shadow masks performed in a vacuum chamber.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.121-134
• /
• 2009

The present study investigated, both experimentally and numerically, the improvement of low-velocity impact damage resistance of carbon fiber reinforced plastic (CFRP) laminates due to through-the-thickness stitching. First, we conducted drop-weight impact tests for stitched and unstitched laminates. The results of damage inspection confirmed that stitching did improve the impact damage resistance, and revealed that the improvement effect became greater as the impact energy increased. Moreover, the stitching affected the through-the-thickness damage distribution. Next, we performed FEM analysis and calculated the energy release rate of the delamination crack using the virtual crack closure technique (VCCT). The numerical results revealed that the stitching affected the through-the-thickness damage distribution because the stitch threads had a marked effect on decreasing both the modes I and II energy release rate around the bottom of the laminate. Comparison of the results for models that contained delaminations of various sizes revealed that the energy release rate became lower as delamination size increased; therefore the stitching improved the impact resistance more effectively when the impact energy was higher.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.361-364
• /
• 2003

The safe operation and reliable maintenance of nuclear power plants is one of the most fundamental and important tasks. It is known that a loose part such as a disengaged and drifting metal inside of reactor coolant systems might lead to a serious damage because of their impact on the components of the coolant system. In order to estimate the impact position of a loose par, three accelerometers attached to the wall of the coolant system have been used. These accelerometers measure the vibration of the coolant system induced by loose part impact. In the conventional analysis system, the low pass filtered version of the vibration data was used for the estimation of the position of a loose part. It is often difficult to identify the initial point of the impact signal by using just a low passed time signal because the impact wave is dispersed during propagation into the sensor. In this paper, the impact signal is analysed by use of various time frequency methods including the short time Fourier transform(STFT), the wavelet transform, and the Wigner-Vill distribution for finding a convenient way to identify the starting point of a impact signal and their advantages and limits are discussed.

• 유통과학연구
• /
• 제13권12호
• /
• pp.85-94
• /
• 2015

Purpose - The purpose of this paper is to provide a political registration point for analyzing the economic impacts on the national economy from the REITs distribution industry in our country. The REITs distribution industry was introduced in 2001 to accelerate the corporate restructuring process and advance the real estate market. During its establishment, the REITs distribution industry faced difficulties; however, the industry grew rapidly through interest from institutional investors, thus mitigating the establishment problems by 2006. In Korea, more than 108 REITs were operating as of the end of June 2015. REITs contribute significantly to the national economy. The economic impacts on the national economy of the REITs distribution industry was analyzed using input-output (I-O) analysis with respect to production, imports, value-added, and employment. Research design, data, and methodology - The research used an I-O analysis of the activities of the REITs distribution industry in the national economy. The I-O analysis methodology analyzes the economic effects that influence other industries with respect to one unit of external investment. The data for this analysis were the I-O table of 2013 as published by the Bank of Korea in 2014. Results - The findings of this study are as follows. First, if an external input to the REITs distribution industry is 1 won, the overall impact of the product is 1.3869 won, the import induction is 0.0002 won, and the value-added induction is 0.7656 won. A new investment of 659.9 billion won into the REITs industry was estimated to produce a gross effect of 915.2 billion won. Second, if an external input to the REITs distribution industry is 1 billion won, the employment-inducing effects are estimated at 19.6394 individuals. The employment-inducing coefficient of 19.6394 for the REITs distribution industry indicates that the industry created significant employment-more than other industries-because the coefficient was 2.2 times the 2013 industry average employment-inducing coefficient of 8.8. Third, the investment effects of the REITs distribution industry on production induction, value-added induction, and employment induction are assumed to be large in business support services, financing, communications and broadcasting, and professional, scientific, and technical services. Conclusions - The REITs distribution industry was analyzed as having a strong employment inducing, high value added effect. The REITs distribution industry is an excellent alternative for the government authority to create multilateral jobs. Because the REITs distribution industry has a significant positive impact on the national economy, it should be developed. However, the I-O methodology has restrictions with respect to the fixation and timing of the input coefficient. Follow-up research is expected to supplement the analysis method at a specific point in time.

• 유통과학연구
• /
• 제12권12호
• /
• pp.5-17
• /
• 2014

Purpose - The purpose of this study is to examine the possible ways to minimize damage by analyzing the influence that may be exerted upon the business process of the distribution industry by unexpected climate change. Research design, data, and methodology - The optimum business process is to be implemented after dividing the diversified business process of the distribution industry into the four stages of the Business Continuity Plan (BCP). Results - First, the upper-level risks that would be impacted most sensitively by climate change have been selected. Second, the impact and characteristics of the environment have been discovered. Third, weighted values by criteria item of upper-level business risks have been analyzed. Fourth, it was possible to define the business priority order based on the individual and then to adjust the Recovery Time Objective (RTO). Conclusion - In this study, the priority order has been defined quantitatively by calculating the priority order score. Further, the priority order has been determined depending on whether any targeted business unit is applicable to the items of the business nature criteria.

• 환경영향평가
• /
• 제33권2호
• /
• pp.53-63
• /
• 2024

생물다양성은 환경영향평가 제도의 목표에 중요한 부문으로, 개발대상지 입지 선정, 주변 환경 파악 및 교란으로 인한 생물종 영향 등에서 활용되고 있다. 환경영향평가 분야에서 새로운 기술과 모델을 활용하여 생물다양성을 보다 정확하게 평가하고 예측하는 방안에 대한 연구가 많이 진행되고 있다. 비록 현장, 문헌조사를 통한 데이터를 바탕으로 종 풍부도 지수를 평가하고 있으나, 현장 데이터는 시·공간적으로 미흡하므로 고해상도의 종 풍부도 매핑을 통한 기초자료를 활용함으로서, 모니터링 실효성 문제 해결이 필요하다. 따라서 본 연구에서는 제4차 전국자연환경조사 데이터와 환경변수를 바탕으로 Random forest 모델을 활용하여 종 분포모형을 개발하였다. 해당 모델은 24종의 포유류 종 분포 매핑 결과를 species richness index를 활용하여 100m 해상도의 종 풍부도 매핑 결과를 도출하였다. 연구 결과, 종 분포모형은 평균 0.82의 AUC값으로 우수한 예측 정확도를 보였다. 또한, 전국자연환경조사 데이터와 비교결과, 고 해상도의 종 풍부도 매핑 결과의 종 풍부도 분포는 정규분포의 형태를 가지고 있어 환경영향평가에서의 기초자료로 사용함에 있어 신뢰성이 높다. 본 연구의 분석결과는 추후 도시개발과 사업을 함에 있어 생물다양성 평가, 서식지 보전 등에 새로운 참고자료로 활용될 수 있을 것으로 사료된다.

• 유통과학연구
• /
• 제17권3호
• /
• pp.57-67
• /
• 2019

Purpose - This study aims to examine the impact of work values on entrepreneurial attitudes, and test the moderating effect of entrepreneurial opportunity identification on the above mentioned relationship as well. Research design, data, and methodology - A questionnaire survey was conducted to 258 employees who comes from 8 different types of the enterprises in northwestern of China, and the corresponding research model was verified. Results - The results show that "comfort and security" (one dimension of work values) has a significant negative impact on entrepreneurial attitudes. Another two dimensions of work values, such as "competence and growth" and "status and independence" have a significant positive impact on entrepreneurial attitudes. In addition, entrepreneurial opportunity identification has a significant moderating effect on the relations between work values and entrepreneurial attitudes. Specifically, only the entrepreneurship opportunity identification positively moderates the relationship between status & independence and entrepreneurial attitudes. Conclusions - This research further enriches the relevant theories of organizational behavior and entrepreneurships. This study also has guiding significance and value for management practice, especially for this research results implies, that is, individual's ability to entrepreneurial opportunity identification (e.g., identify feasible distribution channel for potential new venture) is important in entrepreneurship.