• 전기학회논문지
• /
• 제57권11호
• /
• pp.1954-1961
• /
• 2008

Microgrid usually consists of a cluster of distributed generators(DGs), energy storage systems and loads, and can operate in the grid-connected mode and the islanded mode. This paper presents detailed descriptions of two different options for controlling the active power of DGs in the microgrid. One is regulating the power injected by the unit to a desired amount(Unit output power control) and the other is to regulate the flow of active power in the feeder where the unit is installed to a constant(Feeder flow control). Frequency-droop characteristics are used to achieve good active power sharing when the microgrid operates in the islanded mode. The change in the frequency and the active power output of DGs are investigated according to the control mode and the configuration of DGs when the microgrid is disconnected from the main grid. From the analysis, this paper proposes a method to determine the droop constant of DGs operating in the feeder flow control mode. Simulation results using the PSCAD/EMTDC are presented to validate the approach, which shows good performance as opposed to the conventional one.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.545-550
• /
• 2015

High Temperature Superconducting (HTS) synchronous generators can be designed with either an air-core type or iron-core type. The air-core type has higher efficiency under rated rotating speed and load than the iron-core type because of the iron losses which may produce much heat. However, the total length of HTS wire in the air-core type is longer than the iron-core type because the generated magnetic flux density of the air-core type is low. This paper deals with designs of 10 MW air-core and iron-core HTS wind power generators for wind turbines. Fully air-core, partially iron-core, and fully iron-core HTS generators are designed, and various stator winding methods in the three HTS generators are also considered, such as short-pitch concentrated winding, full-pitch concentrated winding, short-pitch distributed winding, and full-pitch distributed winding. These HTS generators are analyzed using a 3D finite elements method program. The analysis results of the HTS generators are discussed in detail, and the results will be effectively utilized for large-scale wind power generation systems.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.63-68
• /
• 2009

As the complexity of the power system becomes higher, tests of the new devices, such as exciter and PCS(Power Conversion System) of the distributed generation sources, in the real operating condition are more important. However tests of the unverified devices in the real power system may cause hazardous malfunction of the system. In order to avoid this problem, power devices may be tested with the real-time simulators instead of the real power system. This paper presents an real-time multi machine power system simulator using PCs(Personal Computer) and Fast Ethernet. Developed real-time simulator performs the electro-mechanical dynamic simulation of multi-machine power system by the network distributed computing technique. Because the simulator consists of usual PCs and Fast Ethernet, it is possible to make up a simulation system very cheaper than the conventional real-time simulator which consists of dedicated expensive hardware devices. The performance of the developed simulator is tested and verified with the scaled model excitation system. The test which adjust the control parameters of the exciter is performed with the well-known New England 10 generator 39 bus sample power system.

• 한국안전학회지
• /
• 제38권1호
• /
• pp.18-24
• /
• 2023

Severe natural disasters and man-made attacks such as terrorism are causing unprecedented disruptions in power systems. Due to rapid climate change and the aging of energy infrastructure, both the frequency of failure and the level of damage are expected to increase. Resilience is a concept proposed to respond to extreme disaster events that have a low probability of occurrence but cause enormous damage and is defined as the ability of a system to recover to its original function after a disaster. Resilience is a comprehensive indicator that can include system performance before and after a disaster and focuses on preparing for all possible disaster scenarios and having quick and efficient recovery actions after an incident. Various studies have been conducted to evaluate resilience, but studies on economic damage considering the duration of a power outage are scarce. In this study, we propose an optimal algorithm that can identify failures after an extreme disaster and restore the load on the distribution system through emergency distributed power generation input and system reconfiguration. After that, the cost of power outage damage is analyzed by applying VoLL and CDF according to each restoration strategy.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.446-454
• /
• 2002

본 연구는 이동 표적체에서 주파수가 서로 다른 신호가 서로 다른 위치에서 발생할 때 도플러 주파수 편이량을 추정하여 이들의 상대적인 신호 발생 위치를 추적하는 도플러 스캐닝 기법에 관한 연구이다. 예를 들어 선박의 발전기와 프로펠러 등과 같은 탑재 기계장치들의 진동에 의해 야기되는 기계적 소음의 각 특징 주파수들의 도플러 주파수 편이는 최단근접거리 (CPA: Closest Point of Approach)에 따라 유일한 시간 정보를 갖고 각 소음원들의 위치에 관련되는 함수이다. 따라서 도플러 스캐닝 기법을 적용하면 이동 선박의 각 기계적 소음원들간의 공간적인 상대 위치 추정이 가능하다. 그러나 일반적으로 기계류 소음의 주파수는 저주파수대역이므로 도플러 주파수 편이량을 추정하기 위해서는 주파수 분해능이 높아야 하고 아울러 탑재장치의 공간분해능을 높이기 위해서는 동시에 시간 분해능이 높아야 한다. 따라서 상호 역비례 관계에 있는 이들 분해능을 동시에 높이기 위해 확장 칼만 필터 알고리즘을 적용하여 특징 신호들의 도플러 주파수 편이량을 추정하여 기계류의 상대적인 탑재 위치를 규명할 수 있음을 보인다. 먼저 수치모의 실험으로 그 가능성을 검증하고 자동차에 탑재된 스피커 음원을 사용한 실험 결과를 통해 그 성능을 확인하도록 한다.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.168-177
• /
• 2020

In recent years, importance of blockchain systems has been grown after success of bitcoin. Distributed consensus algorithm is used to achieve an agreement, which means the same information is recorded in all nodes participating in blockchain network. Various algorithms were suggested to resolve blockchain trilemma, which refers conflict between decentralization, scalability, security. An algorithm based on Byzantine Agreement among Decentralized Agents (BADA) were designed for the same manner, and it used limited committee that enables an efficient consensus among considerable number of nodes. In addition, election of committee based on Proof-of-Nonce guarantees decentralization and security. In spite of such prominence, application of BADA in actual blockchain system requires further researches about performance and essential features affecting on the performance. However, performance assessment committed in real systems takes a long time and costs a great deal of budget. Based on this motivation, we designed and implemented a simulator for measuring performance of BADA. Specifically, we defined a simulation framework including three components named simulator Command Line Interface, transaction generator, BADA nodes. Furthermore, we carried out response surface analysis for revealing latent relationship between performance measure and design parameters. By using obtained response surface models, we could find an optimal configuration of design parameters for achieving a given desirable performance level.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.271-272
• /
• 2011

본 논문은 SOGI를 이용한 정상분 전압 검출을 기반으로 하는 SRF(synchronous reference frame)-PLL(phase locked loop) 시스템을 제안한다. 일반화된 2차 적분기의 이중으로 사용하여 QSG(Quadrature-signals generator)의 성능을 개선하여 전압 불평형, 고조파 왜곡 등으로 인한 오차 발생 시에도 빠르고 정확한 위상 검출이 가능하도록 하였으며 본 논문에서 제시한 알고리즘은 PSIM 프로그램 결과를 통하여 타당성을 입증한다.

• Industrial Engineering and Management Systems
• /
• 제15권2호
• /
• pp.131-142
• /
• 2016

We consider a multi-server queueing system without buffer and with two types of customers as a model of operation of a mobile network cell. Customers arrive at the system in the marked Markovian arrival flow. The service times of customers are exponentially distributed with parameters depending on the type of customer. A part of the available servers is reserved exclusively for service of first type customers. Customers who do not receive service upon arrival, can make repeated attempts. The system operation is influenced by random factors, leading to a change of the system parameters, including the total number of servers and the number of reserved servers. The behavior of the system is described by the multi-dimensional Markov chain. The generator of this Markov chain is constructed and the ergodicity condition is derived. Formulas for computation of the main performance measures of the system based on the stationary distribution of the Markov chain are derived. Numerical examples are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1931_1933
• /
• 2009

NoC 기반 시스템이 적용되는 설계는 시스템 크기가 커짐에 따라 칩 테스트 문제도 동시에 제기 되고 있다. 이에 따라 NoC 기반의 시스템의 테스트 시간을 줄일 수 있는 internal test 방식의 새로운 BIST(Built-in Self-Test) 구조에 관한 연구를 하였다. 기존의 NoC 기반 시스템의 BIST 테스트 구조는 각각의 router와 core에 BIST logic과 random pattern generator로 LFSR(Linear Feedback Shift Register)을 사용하여 연결하는 individual 방식과 하나의 BIST logic과 LFSR을 사용하여 각각의 router와 core에 병렬로 연결하는 distributed 방식을 사용한다. 이때, LFSR에서 생성된 테스트 벡터가 router에 사용되는 FIFO 메모리를 통과하면서 생기는 테스트 타임 증가를 줄이기 위하여 shift register 형태의 FIFO 메모리를 변경하였다 제안된 방법에서 테스트 커버리지 98%이상을 달성하였고, area overhead면에서 효과를 볼 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.511-517
• /
• 2015

Determination of the required reserve capacity has an important function in operation of power system and it is calculated based on the largest loss of supply. However, conventional method cannot be applied in future power system, because potential grid-connected distributed generator and abnormal temperature cause the large load imbalance. Therefore this paper address new framework for determining the optimal required reserve capacity taking into account the real time load imbalance. At first, we introduce the way of operating reserve resources which are the secondary, tertiary, Direct Load Control (DLC) and Load shedding reserves to make up the load imbalance. Then, the formulated problem can be solved by the Probabilistic Dynamic Programming (PDP) method. In case study, we divide two cases for comparing the cost function between the conventional method and the proposed method.