• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2013

This paper describes the coordinated droop control method for stand-alone type DC micro-grid to improve reliability and utilization of distributed generations and energy storage. The stand-alone type DC micro-grid consists of several distributed generations such as a wind power generation, solar power and micro-turbine, and energy storage. The proposed method which is based on autonomous control method shows high reliability and stability through coordinated droop control of distributed generations and energy storage and also capability of battery management. The operation of stand-alone type DC micro-grid was analyzed using detail simulation model with PSCAD/EMTDC software. Based on simulation results, a hardware simulator was built and tested with commercially available components and performance of system was verified.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.650-657
• /
• 1999

In this paper, a real-time communication method using a PICNET-NP(Plant Instrumentation and Control Network for Nuclear Power plant) is proposed with an analysis of the control network requirements of DCS(Distributed Control System) in unclear power plants. The method satisfies deadline in case of worst data traffics by considering aperiodic and periodic real-time data and others.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.778-784
• /
• 2017

본 논문에서는 철도화물 물류 효율화를 위한 유선 분산제어시스템과 무선 분산제어시스템 구성방안을 제안하고, 유선 분산제어시스템에 대한 검증을 수행하였다. 검증조건은 화물차량 50량을 연결하여 부산신항에서 진례역까지 21km를 평균속도 약 100km/h로 왕복 운행하였다. 검증결과는 분산중련에 의하여, 제어차와 피제어차의 견인출력과 제동출력이 분산됨을 확인하였다. 이와 같은 분산제어 적용시 기존 화물수송의 2배이상의 물류효율성향상을 기대할 수 있다. 다만, 유선 분산제어시스템의 경우 케이블 포설 및 유지보수가 어려우며, 화물차량의 편성 변경조성이 불가능한 단점이 있다. 유선 분산제어시스템의 검증을 통하여 국내 화물차량에 분산제어시스템 적용가능성을 확인하고, 이를 발전시켜 무선분산제어시스템 적용하기 위함이다. 무선 분산제어시스템 적용을 위하여, 검증구간에 ISM 대역에 대한 전파환경분석을 수행하였고, 그 결과, 해당 구간에 ISM 대역에 Wifi 기술 적용이 가능함을 확인하였다. 또한 대상 차량에 신규 설치되는 WDP(Wireless Distributed Power) 장치 적용을 위하여 추진/제동/종합제어장치와의 송수신 제어신호에 대하여 정의하였다. 무선 분산제어시스템의 경우, 적용과 운용의 편의성이 보장되지만, 차량의 제어를 무선에 의존함에 따라 신뢰도와 비상시 안전대책 수립이 선행되어야 한다.

• 전기학회논문지P
• /
• 제52권3호
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.734-743
• /
• 1999

In this paper, a real-time communication method using a PICNET-NP(Plant instrumentation and Control Network for Nuclear Power plant) is proposed with an analysis of the control network requirements of DCS(Distributed Control System) in nuclear power plants. The method satisfies deadline in case of worst data traffics by considering aperiodic and periodic real-time data and others. In addition, the method was used to analyze the data characteristics of the DCS in existing nuclear power plant. The result shows that use of this method meets the response time requirement(100ms).

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1463-1471
• /
• 2009

In this paper, a new algorithm of Integrated Volt/Var Control (IVVC) is proposed using Volt/Var control for the Distribution Automation System (DAS) based on the modeling of the distributed load and the distributed current. In the proposed, the load flow based on the modeling of the distributed load and the distributed current are estimated from constants of four terminals using the measurement of the current and power factor from a Feeder Remote Terminal Unit (FRTU). For Integrated Volt/Var Control (IVVC), the gradient method is applied to find optimal solution for tap and capacity control of OLTC (On-Load Tap Changers), SVR (Step Voltage Regulator), and SC (Shunt Condenser). What is more Volt/Var control method is proposed using moving the tie switch as well as IVVC algorithm using power utility control. In the case studies, the estimation and simulation network have been testified in Matlab Simulink.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.693-697
• /
• 2007

A control system for solar thermal power plant is the control system to coordinate the whole system's operation, including management of distributed control systems, process control for optimal operation of total system, monitoring system operating conditions and doing administrative functions. This work, as a progress report, presents the results obtained so far in building a control system for the 1MW solar thermal power plant. To make the control system, we first defined the control system's hierarchy and classified the role of each layer. Then, as the first stage of making control system, we designed and developed the sun tracking control system for heliostat.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1679-1691
• /
• 2016

Successive interference cancellation (SIC) is an effective means of multi-packet reception to combat interference at the physical layer. We investigate the joint optimization issue of channel access and power control for capacity maximization in SIC-enabled wireless networks. We propose a new interference model to characterize the sequential detection nature of SIC. Afterward, we formulize the joint optimization problem, prove it to be a nondeterministic polynomial-time-hard problem, and propose a novel approximation approach based on the genetic algorithm (GA). Finally, we discuss the design and parameter setting of the GA approach and validate its performance through extensive simulations.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.324-340
• /
• 2014

Recent developments in power electronics technology have spurred interest in the use of renewable energy sources as distributed generation (DG) generators. The key component in DG generators is a grid-connected inverter that serves as an effective interface between the renewable energy source and the utility grid. The multifunctional inverter (MFI) is special type of grid-connected inverter that has elicited much attention in recent years. MFIs not only generate power for DGs but also provide increased functionality through improved power quality and voltage and reactive power support; thus, the capability of the auxiliary service for the utility grid is improved. This paper presents a comprehensive review of the various MFI system configurations for single-phase (two-wire) and three-phase (three- or four-wire) systems and control strategies for the compensation of different power quality problems. The advances in practical applications and recent research on MFIs are presented through a review of nearly 200 papers.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1100-1107
• /
• 2016