무선 네트워크를 통한 네트워크 제어 시스템 (NCS: Networked Control Systems)은 다양한 제어 시스템의 효율성을 극대화 할 수 있는 잠재력을 가지고 있다. 본 연구에서는 네트워크 제어 시스템으로부터 이끌어낸 상태갱신주기(SUI: State Update Interval)라는 성능 메트릭을 정의한다. 제시된 상태갱신주기는 제어와 통신 시스템 계층 사이의 핵심적인 상호작용을 포함하고 있다. 제시된 성능 메트릭은 NCS를 위한 최적화 문제를 도출하는데 사용이 되었으며, 이러한 최적화 문제의 목적 함수는 상태갱신주기의 제한 요소를 만족하는 확률이며 변수는 매체접근 확률로 표현되었다. 본 연구에서는 제시된 최적화 문제의 최적 매체접근 확률이 유일한 해를 가진다는 것을 증명하였다. 또한 NCS를 위한 최적의 매체접근 확률은 전송률을 극대화하는 기존의 매체접근 확률보다 낮다는 결론을 도출하였다. 성능 분석 결과를 통하여 시스템의 안정도가 상태갱신주기를 고려한 최적의 매체접근 확률을 사용하였을 때가 전송률을 최대화하는 매체접근 확률을 사용 했을 때 보다 높다는 점을 보였다.
Journal of Advanced Marine Engineering and Technology
/
제35권2호
/
pp.288-294
/
2011
본 논문에서는 FPGA기반의 SoC보드(Xilinx Virtex-4 ML401 EVM)를 이용한 전력인버터제어시스템을 설계하였다. 선박에 전력시스템을 적용하기 위해서 선박의 최신 통신 프로토콜인 NMEA 2000 표준 프로토콜을 적용하였으며 전력 시스템의 성능을 평가하기 위한 PC기반의 모니터링 프로그램을 제작하였다. 전력 제어시스템은 FPGA기반의 임베디드 SoC보드상에서 이중프로세서(Dualprocessor)형태로 설계하였으며 이중프로세서를 적용함으로써 실시간 제어 감시가 가능하다. 이중프로세서 중 하나는 전력 제어를 위한 PWM신호생성 및 전력 회로내의 주요 전력 파라미터를 센싱 하는 제어용 프로세서로 동작하며(Control processor) 다른 프로세서는 제어프로세서의 각종 전력 센서 파라미터와 제어 파라미터들을 이중포트 램(Dual Port RAM)을 이용하여 정보를 공유하고 외부 NMEA 2000프로토콜 기반의 모니터링 장치와 네트워크 기반의 통신을 수행하는 통신용 프로세서(Communication processor)로 구성된다. 본 논문에서 제작한 전력 제어시스템은 선박내의 분산발전,송배전 및 전압 레귤레이션 시스템에 적용 될 수 있다.
재현기간에 따른 설계파고 산정시 Gumbel 극치분포함수의 축척모수와 위치모수를 확률변수로 고려할 수 있는 Monte-Carlo 모의법을 제안하였다. 축척모수의 불확실성의 정도에 따라 설계파고의 불확실성의 정도가 결정되며 그 분포형태는 Gumbel 분포함수를 따른다. 또한 내용년수에 해당하는 최대 유의파고 분포특성을 이용하여 재현기간에 따른 설계파고를 산정하는 경우에 더 많은 불확실성이 포함된다. 한편 피복재의 파괴모드에 대한 신뢰성 해석을 수행하여 설계파고의 불확실성에 대한 영향을 검토하였다. 설계파고의 불확실성을 고려하는 방법에 따라 재현기간 50년 동안 5% 피해수준에 해당하는 파괴확률을 산정하여 비교하였다. 설계파고의 불확실성이 년 최대 유의파고자료의 불확실성과 같다고 가정하면 파괴확률이 넓은 범위에 걸쳐서 산정된다.
To investigate the degradation of mechanical properties induced mainly by neutron irradiation, the tensile tests were conducted from room temperature to 300\\`c using the irradiated and the unirradiated Zr-2.5Nb pressure tube materials. The irradiated longitudinal and transverse specimens were collected from the coolant inlet, middle, and outlet parts of M-11 tube which had been operated in Wolsung CANDU Unit-1 and exposed to different operating temperatures and irradiation fluences. The different tensile behavior was characterized not by the fluences of irradiation but by the tensile loading direction. The transverse specimen showed the higher strength and lower elongation than those of the longitudinal one. It was believed that these phenomena resulted from the microstructure anisotropy caused by the extrusion process. The increased strength hardening and decreased elongation embrittlement of the irradiated material were compard to those of the unirradiated one. While the tensile strength of the inlet was higher than that of the outlet, the elongation of the inlet was lower than that of outlet. Considering the operation condition, it was proposed that the operating temperature could be a more effective parameter than the irradiation fluence for long-time life. Through the TEM observation, it was found that while the a-type dislocation density was increased, the c-type dislocation was not changed in the irradiated. The fact that the higher dislocation density was sequentially distributed over the inlet, the middle, and the outlet parts was consistent with the distribution of the tensile strength.
Purpose: Although the demand for the mammoplasty including reduction or reconstruction is remarkably increasing, the anthropometric measurement for the breast, especially about the nipple areola complex(NAC) of Korean women has not been reported recently. Therefore, the anthropometric measurement about the NAC was performed to suggest the standard size of NAC for Korean women. Methods: Two hundred and twenty five female volunteers in 20's through 50's were included for the study. Questionnaires including the diameter of NAC, the diameter, height of nipple, age, marital status, delivery and lactation history were distributed to the volunteers and collected. Results: The mean values of our study are as follows: the areola diameter is $30.93{\pm}10.07mm$, the nipple diameter is $10.21{\pm}4.14mm$ and the height of nipple is $6.54{\pm}3.74mm$. The diameter of nipple areola complex(NAC) is bigger in old ages. If the volunteers have the history of marriage, delivery and lactation, it is bigger, as well. The height of nipple closely related to individual characters except the correlation between height of nipple and age. Conclusion: It is important to have standard data for the nipple areola complex in order to have good aesthetic results of mammoplasty. Despite the importance, there are a few measurement data for the nipple areola complex(NAC) of Korean women. The result of our study is not the absolute parameter for breast surgery, however it can be used as the standard size for NAC in the Korean female during breast surgery.
초지 공정은 wire, roll, pump등의 회전체로 이루어진 공정이 거의 대부분이기 때문에 주기적으로 변동하는 성분들이 많고, QCS(Quality Control System) 및 DCS(Distributed Co n ntrol System)상에 서 의 자동 Control Logic에 의 한 불안정 (Fluctuation)요소도 내 재 되 어 있 어 이에 대한 분석이 필요하다. 이러한 주기적인 변동은 제품의 여러 물성(평량, 두께, 광택 도등) 에 영향을 미치게 되어 품질의 균일성이나 프로파일에 영향을 미치게 된다. 따라서 공정상이나 품질에서 주기적으로 변동하는 성분을 추출하여 공정 각 성분과 연관을 시키변 품질에 나타나는 주기적 성분의 요인이 어느 부분에서 기인하는 지를 직접적으로 찾아낼 수 있고 이의 개선을 통해 품질의 균일성 및 프로파일 향상을 꾀할 수 있다. 본 연구에서는 Air padded type 헤드박스 초지기에서 DAQ(Data Acquisition) System 을 이용하여 각 공정별로 MD(Machine Direction)방향으로의 변동을 측정하고 제품의 물성 변동과 비교하였다. DAQ System은 각 공정상의 전기적 신호를 높은 주파수 영역까지 다채널로 동시에 받 아 들일 수 있는 장치로 이 시스템을 활용하여 공정상의 Machine chest 농도, Stock box 유량 및 레벨, Fan pump RPM, Cleaner압력, Screen압력, H!B압력 및 레벨, Silo level등 공 정요소의 변동상태와 상호영향을 분석하였다. 이러한 공정 각 요소의 변동과 MD 방향의 제품 물성 값(Tapio, Paper Variation Analyzer에 대한 비교 분석결과 제품 평량에서 주기적인 변동성분을 확인할 수 있었고 이중 큰 비 중을 차지하는 것이 fνB 레벨 변동주기와 일치하는 것을 찾아낼 수 있었다. 이에 근거하여 D DCS system의 control 요소인 튜닝 parameter(P,I 값)들을 미 세 조정 하여 제 품의 MD방향 평량 변동 진폭을 기존 수준의 30% 수준으로 감소시킬 수 있었다. 그 결과 COV(표준편차/ 평량)값을 0.8-1.2%에서 0.6-0.8%수준으로 낮출 수 있었고 이에 따라 CD (Cross Direction) 방향의 제품 Profile도 함께 개선되는 효과를 거둘 수 있었다.
Although somatosensory evoked potentials(SSEPs) have been utilized as the useful diagnostic tools in evaluating the wide variety of pathological conditions, such as focal lesions affecting the somatosensory pathways, demyelinating diseases, and detecting the clinically occult abnormality, their neural generators is still considerably uncertain. To appreciate the basis for uncertainties about the origins of SSEPs, consider criteria that must be met to establish a causal relationship between activity in a neural structure and a spine/ scalp-recorded potential. Electrode locations and channel derivations for SSEPs recordings are based on two principles:(1) the waveforms are best recorded from electrode sites on the body surface closest to the presumed generator sources along the somatosensory pathways, and(2) studies of the potential-field distribution of each waveform of interest dictate the best techniques to be used. In this article, authors will describe followings focused on ;(1) the concepts of near field potentials(NFPs) and far field potentials(FFPs) - the voltage of NFPs is highly dependent upon recording electrode position, FFPs are unlike NFPs in that they are widely distributed, their latencies and amplitudes are independent of recording electrode.(2) appropriate montage settings to detect the significant potentials in the median nerve and posterior tibial nerve SSEPs(3) neural generators of various potentials(P9, N13, P14, N18, N20, P37) and their clinical significance in interpretating the results of SSEPs. Especially, Characteristics of N18(longduration, small superimposed inflection) suggested that N18 is a complex wave with multiple generators including brainstem structures and thalamic nuclei. And N18 might be used as the parameter of braindeath. Precise understanding on these facts provide an adequate basis utilizing SSEPs for numerous clinical purposes.
For Al 6k21-T4 alloy, linear laser welding produced the lower shear-tensile strength than the base metal. This study improved the shear-tensile strength by using the weaving laser at the optimized welding condition, i.e., 2mm weaving width and 25Hz frequency. The large weaving width increased the weld width, therefore improving the joint strength. For the specimen of low strength, the porosity was distributed continuously along the intersection between the plates and fusion line. However, for the optimized welding condition, large oval-shaped porosities were located only in the advancing track of the concave part. Regardless of the welding condition, solidification cracking was initiated at the intersection and propagated through small porosities in the weld part. furthermore, the concave part had more significant porosity in the weld and HAZ, respectively than the convex part. The continuity of porosities played a key role to determine the strength. And, the weaving width was an important parameter to control the strength.
본 연구에서는 산림식생에 따른 장기적인 측면에서의 유역 물수지 영향을 살펴보기 위하여 보청천 유역을 대상유역으로 선정하고, 준분포형 매개변수 모형인 SWAT 모형을 적용하여, 침엽수와 활엽수에 따른 증발산, 지표유출, 중간유출, 기저유출, 총 유출의 차이를 검토하였다. 먼저 SWAT 모형내 식생 생장 알고리즘을 수정하여 연중 일정한 엽면적지수를 갖는 국내 침엽수림의 생장 특성을 반영할 수 있도록 하였으며, 대상유역을 하나의 토지피복을 갖는 가상의 유역으로 설정한 후, 수정된 SWAT 모형을 적용하여 각 물수지 요소 변화를 모의한 결과, 침엽수가 활엽수에 비해 증발산 증가 및 유출 감소에 더 영향을 미치는 것으로 나타났다. 그러나, 보다 정량적인 규명과 유출모형의 불확실성을 보완하기 위해서는 수종 외에 수령, 식재밀도, 식재위치, 토양특성자료 등 다양한 조건이 충분히 고려되어야 할 것이다.
집중권 방식의 견인용 영구자석 매입형 동기전동기(IPMSM)는 출력밀도의 관점에서 우수하나 심각한 영구자석 와전류 손실을 가지고 있다. 본 논문에서는 영구자석 매입형 동기전동기의 자기적 특성을 분석하여 V-타입 회전자 영구자석의 각도와 폭을 변경함으로써 철손을 최소화하는 최적설계를 수행하였다. 자성체의 비선형성을 고려하기 위하여 자기등가회로법 대신 유한요소법을 이용하였으며, 각 파라메타가 영구자석에 발생하는 철손에의 영향 및 파라메타간의 교호작용을 파악하기 위하여 시뮬레이션 기반의 실험계획법을 사용하였다. 이를 통하여 모터의 성능을 유지하면서 철손을 상당히 줄인 집중권 방식의 영구자석 매입형 동기전동기의 최적설계를 반응표면법을 이용하여 도출하였으며, 유한요소법을 이용하여 이를 검증하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.