• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.725-731
• /
• 2004

In this study, the three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', 'parallel/exchanged type', and 'parallel/separated type' respectively in this work) were designed and manufactured. This paper presents the tested results of the thermal recovery characteristics on the interrupters using a simplified synthetic test facility. The 'serial type' hybrid interrupter which is to obtain more easily the pressure rise for the thermal recovery compared with the others has the best capability in the thermal recovery characteristics. In order to investigate the stress on the operating mechanism, the distortion of the stroke wave in on-load test was examined to the stroke curve in no-load test. The biggest distortion was occurred in the 'parallel/exchanged type' hybrid interrupter. Finally, the small interruption capability on the three type interrupters was estimated by a theoretical form and the 'parallel/separated type' hybrid interrupter has the advantage of the others in the view of structure.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.16 no.3
• /
• pp.25-33
• /
• 1979

The relation between the welding conditions and welding distortions were studied with the weld parameters, current, welding speed and plate thickness, and the form of the distortions were derived theoretically. To derive these formulas, the temperature distribution on the plane normal to the direction of the weld line was assumed to be parabolic. Both the theoretical studies for the transverse shrinkage and angular distoction were compared with the experiments. The experiments were performed on the fundamental cases of a bead welds on rectangular mild steel plates. It was found that the distoction formulas were in good agreement with the results of the experiments. The formulas for the calculation of the distortion were established for the case of bead on plate weld using rectangular mild steel plate and the KS E4313, $4mm\phi$ welding rod.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.1
• /
• pp.59-64
• /
• 1997

By using a selective learnable self-organizing feature map(SOFM) a more practical and generalized mehtod is proposed in which the effective nonlinear shape restoration is possible regardless of the existence of the distortion modelss. Nonlinear mapping relation is extracted from the distorted imate by using the proposed selective learning SOFGM which has the special property of effectively creating spatially organized internal representations and nonlinear relations of various input signals. For the exact extraction of the mapping relations between the distorted image and the original one, we define a disparity index as a proximal nmeasure of the present state to the final idealy trained state of the SOFM, and we used this index to adjust the training of the mapping relations form the weights of the SOFM. Simulations are conducted on various kinds of distorted images with or without distortion models, and the results show that the proposed method is very efficeint very efficient and practical in nonlinear shape restorations.

• Smart Structures and Systems
• /
• v.9 no.5
• /
• pp.411-426
• /
• 2012

Thin-walled adaptive structures render a large and important group of adaptive structures. Typical material system used for them is a composite laminate that includes piezoelectric material based sensors and actuators. The piezoelectric active elements are in the form of thin patches bonded onto or embedded into the structure. Among different types of patches, the paper considers those polarized in the thickness direction. The finite element method (FEM) imposed itself as an essential technical support for the needs of structural design. This paper gives a brief description of a developed shell type finite element for active/adaptive thin-walled structures and the element is, furthermore, used as a tool to consider the aspect of mesh distortion over the surface of actuators and sensors. The aspect is of significance for simulation of behavior of adaptive structures and implementation of control algorithms.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.65-69
• /
• 2004

In the present work, characteristics of an axial flow fan haying distorted inlet flow produced by hub cap are investigated. The distorted inlet flow is generated by the shape of hub cap installed in front of the axial flow fan. Two different cases of hub cap geometry are analyzed to verify the influence of flow distortion. The flow fields are analyzed numerically by solving steady form of three-dimensional Reynolds-averaged Wavier-Stokes equation and standard k-$\epsilon$ model is used for a turbulence closure. The results obtained from the numerical simulation are compared to those from experimental measurements. It is found that the overall performance of the axial flow fan is increased by reducing the flow distortion at the hub. Detailed characteristics of the flow fields of two different geometric conditions are also discussed.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.112-114
• /
• 1994

When an electron is transferred to $C_{60}$, the bond structure is distorted due to the electron-lattice interaction and a polaron-like state is formed. The evolution process of the bond distortion is studied by the dynamical equation of atomic lattice, and time-dependent changes of the bond lengths are determined. Then it can be estimated that the relaxation time to form the polaron-like state is a fraction of a picosecond.

• Structural Engineering and Mechanics
• /
• v.14 no.3
• /
• pp.345-364
• /
• 2002

The scaling laws for vibration response of anti-symmetrically laminated plates are derived by applying the similitude transformation to the governing differential equations directly. With this approach, a closed-form solution of the governing equations is not required. This is a significant advantage over the method employed by other researchers where similitude transformation is applied to the closed-form solution. The scaling laws are tested by comparing the similitude fundamental frequencies to the theoretical fundamental frequencies determined from the available closed-form solutions. In case of complete similitude, similitude solutions from the scaling laws exactly agree with the theoretical solutions. Sometimes, it may not be feasible to select the model which obeys the similarity requirement completely, therefore partial similitude is theoretically investigated and approximate scaling laws are recommended. The distorted models in stacking sequences and laminated material properties demonstrate reasonable accuracy. On the contrary, a model with distortion in fiber angle is not recommended. The derived scaling laws are very useful to determine the vibration response of complex prototypes by performing the experiment on a model with required similarities.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.3
• /
• pp.123-138
• /
• 2004

The objective of this study is to review the expressive effect of fashion illustrations and to enlarge its expressive range by analysing the correlations between fashion illustrations and surrealistic expressive characteristics. The results are as follows. The surrealistic expressive methods of fashion illustration such as depaysement and automatism have been used by many foreign and domestic fashion illustrators. I think that these methods reinforce the subjective aspect of expressive effects and enlarge the transmitting function of fashion message. The elements of expression are divided into color, texture, shape/form and space. Subjective colors rather than natural colors are used for the surrealistic expressive effect of color in fashion illustrations, and illusion of space is expressed by the change of brightness. The surrealistic expressive effect in fashion illustrations distorted the experience of factual texture and disturbed the visual texture. The use of tactile texture presented strange effects perspectively. The objects of shape in fashion illustrations were mainly human body. The form of human body presents reconstituted and reinterpreted figure by transformation or distortion according to the intention of the artist rather than realistic and physical form. In fashion illustration, the transformation of the human body itself whose body parts get separated, superposition of exterior material and human body, and the distortion of human body by the change are done. Space is where background and shapes are inter-penetrated because they are ambiguous and untransparent, and where all are in disorder and unbalance. The method of projection uses distance perspective, multiple perspective and amplified perspective representation, and forms a psychological space feeling. And I think the use of surrealistic expressive methods are very useful for the subjective sensitiveness and the transmission of a fashion message, and presents a possibility to develop a new expressive method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.53-63
• /
• 1997

In this paper, we present a new macroblock-based bit allocation scheme in multiple MPEG-1 video encoders system and a single multiplexer over a single channel. The proposed scheme models the relations between fate(Bits/MB) and distortion(MSE/MB), rate and quantizer parameter(QP), distortion and quantizer parameter, respectively, in the same form. By using these relations, we minimize the Larangian cost function to obtain a bit allocation scheme based on macroblock unit. Experimental results show that the proposed scheme can reduce MSE compared to other conventional buffer-based rate control methods, i.e. independent buffer control method and shared common buffer control one. And we confirmed, through computer simulation, that the proposed scheme can be effectively modified to maintain the objective quality of a specific video service at a constant level.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.249-254
• /
• 2002

We consider a buffer-constrained adaptive quantization algorithm for image compression. Buffer control algorithm was considered with source coding scheme by some researchers and recently a formal description of the algorithm in terms of rate-distortion has been developed. We propose a buffer control algorithm that incorporates the buffer occupancy into the Lagrange multiplier form in a rate-distortion cost measure. Although the proposed algorithm provides the suboptimal performance as opposed to the optimal Vieterbi algorithm, it can be implemented with very low computaional complexity. In addition stability of this buffer control algorithm has been mentioned briefly using Liapnov stability theory.