• 지구물리와물리탐사
• /
• 제6권3호
• /
• pp.153-159
• /
• 2003

본 연구에서는 상반성 원리에 의해 수진기 배열을 변경하여 영상화 범위를 확장한 탄성파 기록을 얻었다. 이를 역시간 구조보정에 적용하여 구조보정 영상의 개선을 시도하였다. 송신원과 수진기의 위치가 바뀌어도 물리적 반응이 변화 없다는 상반성의 원리를 이용하면 탄성파 탐사기록이 취득 되지 않은 수진기 위치에서도 탄성파 기록을 얻을 수 있다. 변경된 수진기 배열에 의한 탐사 기록의 효율성을 검증하기 위하여 Marmousi 속도 모형을 적용한 역시간 구조보정을 수행하였다. 현장 자료의 경우 정확한 지하 속도 모형을 얻기 어려우므로 이를 고려하여 선형적으로 속도가 증가하는 모형을 적용하였다. 구조보정 결과 탐사기록의 변경이 구조보정 영상의 해상도 개선에 효과가 있음을 확인하였다. 따라서 기존의 탐사기록을 걸다 유용하게 이용할 수 있을 것으로 보인다.

• 한국ITS학회 논문지
• /
• 제8권5호
• /
• pp.1-11
• /
• 2009

TCS (Toll Collection System) 데이터는 원시 데이터 자체로서도 구간의 교통상황을 어느 정도 반영할 수 있는 교통특 성을 내포하고 있다. 그러나 TCS 데이터에는 이상치가 포함되어 있어 이러한 데이터는 해당 구간의 통행시간을 대표한다고 볼 수 없으므로 만약 이러한 이상치들이 포함되어 있음에도 불구하고 제거하지 않고 집락을 한다면 이상치들로 인해 통행시간은 크게 왜곡 될 가능성이 있다. 특히 장거리 구간일수록 통행시간의 분산이 증가하여 동일구간 동일시간대라도 다양한 통행시간이 분포하고 있다. 구간이 길어질수록 통행시간의 변동이 심하여 적절한 통행시간 대푯값을 구하기가 어렵다. 따라서 TCS 자료를 이용하여 통행시간의 대푯값을 산정하기 위해서는 통행시간의 변동 특성을 파악하는 것이 중요하다. 본 연구에서는 TCS 데이터의 전처리 기법을 개선하되 구간의 길이와 교통상황에 따른 통행시간의 변동을 고려하여 TCS 원시데이터로부터 시 공간적 통행패턴을 파악할 수 있는 의미 있는 통행시간을 추출하고자 한다.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.423-435
• /
• 2022

In this article, we present torsion-bending analysis of a composite FGM beam with an open section, according to the advanced and refined theory of 1D / 3D beams based on the 3D Saint-Venant's solution and taking into account the edge effects. The (initially one-dimensional) model contains a set of three-dimensional (3D) displacement modes of the cross section, reflecting its 3D mechanical behaviour. The modes are taken into account depending on the mechanical characteristics and the geometrical form of the cross-section of the composite FGM beam. The model considered is implemented on the CSB (Cross-Section and Beam Analysis) software package. It is based on the RBT/SV theory (Refined Beam Theory on Saint-Venant principle) of FGM beams. The mechanical and physical characteristics of the FGM beam continuously vary, depending on a power-law distribution, across the thickness of the beam. We compare the numerical results obtained by the three-beam theories, namely: The Classical Beam Theory of Saint-Venant (Classical Beam Theory CBT), the theory of refined beams (Refined Beam Theory RBT), and the theory of refined beams, using the higher (high) modes of distortion of the cross-section (Refined Beam Theory using distorted modes RBTd). The results obtained confirm a clear difference between those obtained by the three models at the level of the supports. Further from the support, the results of RBT and RBTd are of the same order, whereas those of CBT remains far from those of higher-order theories. The 3D stresses, strains and displacements, obtained by the present study, reflect the 3D behaviour of FGM beams well, despite the initially 1D nature of the problem. A validation example also shows a very good agreement of the proposed models with other models (classical or higher-order beam theory) and Carrera Unified Formulation 1D-beam model with Lagrange Expansion functions (CUF-LE).

• 한국정보통신학회논문지
• /
• 제14권3호
• /
• pp.613-620
• /
• 2010

화자인증 시스템은 훈련 환경과 인식 환경이 다른 경우 인식 성능이 크게 저하된다. 이러한 훈련과 인식 환경의 불일치는 다양한 잡음과 상이한 채널 환경 때문이다. 본 논문은 화자인증 시스템의 강인성 개선을 위하여 음성신호의 위상에 기반한 특정 추출 기법을 제안한다. 이 방법은 음성신호의 위상으로부터 순시 주파수를 계산하여 대역별로 순시 주파수를 모두 모아 구한 히스토그램으로부터 특징 계수를 추출한다. 이 특징 파라미터를 적용한 결과 조 용한 환경뿐만 아니라 잡음환경 그리고 채널 왜곡 환경에서도 화자인증 시스템의 성능이 개선됨을 알 수 있다.

• 한국광학회지
• /
• 제26권3호
• /
• pp.147-154
• /
• 2015

두 개의 액체와 두 개의 파장을 이용한 투과형 편향법을 이용하여 시료 양면의 3차원 형상을 동시에 측정 할 수 있는 모델을 제시하고, 실험적으로 다초점 렌즈의 양면 프로파일을 측정하였다. 편향법은 면적이 비교적 크고 거울과 같이 산란이 거의 없는 물체의 3차원 측정을 하는데 유용하다. 편향법을 통해 얻은 왜곡 무늬로부터 위상 기울기를 구하기 위해 위상이동법과 시간추적 위상펼침 (TPU:Temporal Phase Unwrapping) 방법을 이용하였고, 구한 기울기로부터 3차원 프로파일을 구하기 위해 최소자승법을 이용하였다. 본 연구에 사용된 방법은 기존의 투과형 편향법과는 달리 시료의 이동 없이 동시에 양면 프로파일을 측정할 수 있는 장점이 있다.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.896-912
• /
• 2014

This study analyzed the reality of avatar size when it was automatically changed by different height and waist circumference inputs. This study focused on analyzing 22 of 28 avatar parts created by the 3D Clo virtual fitting program, based on the height and 'waist circumference of 2,247 woman samples from the $6^{th}$ Size Korea survey data. The 'waist back L'. and 'bishoulder L'. of the avatars were shorter than the bodies; however, the avatars' 'waist H'. and 'arm L'. were longer. Differences between the avatar and body increased in the taller groups. The body proportion of tall avatars was more distorted than small avatars. There were also some exaggerations in some circumferences. The 'bust C'. of the avatar was larger in the group with thin upper torsos; however, the 'hip C'. and 'upper arm C'. were larger in the group with thick upper torsos. The avatar torso silhouette of each somatotype was not representative of the real body silhouette as the 'hip C'. and 'bust C'. always increased together.

• 경영과정보연구
• /
• 제2권
• /
• pp.209-235
• /
• 1998

Traditional cost system is distorted due to the using unit-based measure. It is being criticized that it do a poor job of attributing the expenses of support resources to the production and sales of individual product. Activity Based Cost System expend the range of second-stage cost assignment drivers beyond the traditional measures of labor and machine times, units produced, and material quantities to allow for drivers that measure the amount of batch-level, product-sustaining, and facility-sustaining activities performed. It is a resources consumption model of organization, not just a more complex cost accounting of cost allocation system. This paper proposes a enterprise resource planning by activity based management. To effective performance system for company that want to be setting competitive levels, the information systems must support a fast moving, rapidly changing. Activity based management is a process of accumulating and tracing cost and performance da to a firm's activities and providing feedback of actual results against the planned cost to initiate corrective action where required. Therefore this system provides a highly powerful decision-making tool. To construct this system, we need Enterprise Resource Planning System. Since ERP is designed around the idea that rapid change and a degree of unhandled change is normal, it allows driving the customer's rapidly needs much deeper through the business cycle.

• International Journal of Fluid Machinery and Systems
• /
• 제4권3호
• /
• pp.349-359
• /
• 2011

An unsteady numerical analysis has been carried out to study the strong impeller volute interaction of a centrifugal pump with six backward swept blades shrouded impeller. The numerical analysis is done by solving the three-dimensional Reynolds Averaged Navier-Stokes codes with standard k-${\varepsilon}$ two-equations turbulence model and wall regions are modeled with a scalable log-law wall function. The flow within the impeller passage is very smooth and following the curvature of the blade in stream-wise direction. However, the analysis shows that there is a recirculation zone near the leading edge even at design point. When the flow is discharged into volute casing circumferentially from the impeller outlet, the high velocity flow is severely distorted and formed a spiraling vortex flow within the volute casing. A spatial and temporal wake flow core development is captured dynamically and shows how the wake core diffuses. Near volute tongue region, the impeller/volute tongue strong interaction is observed based on the periodically fluctuating pressure at outlet. The results of existing analysis also proved that the pressure fluctuation periodically is due to the position of impeller blade relative to tongue.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.174-174
• /
• 2003

Highly (111)-oriented PZT [Pb(Zrl-xTix)O3] thin films in the Zr-rich rhombohedral phase-field were successfully fabricated on Pt(111)/Ti/SiO2/Si substrates by combining PLD method with sol-gel process. These highly (111)-oriented films can be used as model systems for polarized Raman scattering study of PZT in the rhombohedral-Phase field because the (111)-direction is the principal off-center axis of the rhombohedral ferroelectricity. For this purpose, we have fabricated PZT films employing two distinctive compositions : one with Zr/Ti = 90/10 (abbreviated as PZT90/10) and the other with Zr/Ti= 60/40 (PZT60/40). The PZT90/10 film belongs to the octahedrally distorted FR(LT) phase with a cell-doubled structure, whereas the PZT60/40 is in the high-temperature FR(HT) phase-field at room temperature. To clearly separate E(TO) phonon modes from Al(TO) modes of the (111)-oriented rhombohedral film, we have suitably devised Z(X,Y)Z and Z(X,X)Z backscattering geometries for E(TO) and Al (TO), respectively. The polarized scattering experiment demonstrated that both types of (111)-oriented rhombohedral films closely followed the Raman selection rule.

• 제어로봇시스템학회논문지
• /
• 제8권7호
• /
• pp.589-598
• /
• 2002

The color measuring/matching expert system is implemented with a new color measuring method that combines intelligent algorithms with image processing techniques. Color measuring part of the proposed system preprocesses the scanned original color input images to eliminate their distorted components by means of the image histogram technique of image pixels, and then extracts RGB(Red, Green, Blue)data among color information from preprocessed color input images. If the extracted RGB color data does not exist on the matching recipe databases, we can measure the colors for the user who want to implement the model that can search the rules for the color mixing information, using the intelligent modeling techniques such as fuzzy inference system and adaptive neuro-fuzzy inference system. Color matching part can easily choose images close to the original color for the user by comparing information of preprocessed color real input images with data-based measuring recipe information of the expert, from the viewpoint of the delta Eformula used in practical process.