• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.210-215
• /
• 1995

Korean medicinal herbs -sasam, gilkyung, jakyak, danggwi, hwangki and chunkung were soaked to the distillate of Korean rice wine for 75 days. The alcohol concentration of distillate, soaking media was adjusted to 45, 35, and 25% respectively with distilled water. Changes in alcohol concentration, pH, optical density, concentration of peoniflorin and decursin were analyzed. Quality of the final product was determined by sensory evaluation. Alcohol concentration was rapidly decreased but pH increased in 15 days and thereafter they showed slow decrease. Decrease of alcohol concentration was affected by the kind of herb and alcohol concentration of soaking media. The strongest effect was observed from danggwi and low alcohol concentration. Concentration of paeoniflorin and decursin, an index component of jakyak and danggwi respectively, showed the similar trend of decrease after increase to maximum concentration. From the sensory evaluation, the best overall quality was obtained from liquors made from 45% alcohol concentration. The quality was decreased in the order of sasam, jakyak, chunkung and hwanggi.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.546-550
• /
• 2016

Over 60~70% of the domestic soil contamination have occurred by petroleum products. B T E X including benzene, toluene, ethylbenzene, xylene and total petroleum hydrocarbon (TPH) have to be inspected for the contaminated soil by petroleum products. An accurate contamination analysis is necessary to estimate the are of contaminated soil and also establish an appropriate purification scheme. In this study, we analyzed a sectional TPH pattern for current domestic distributed petroleum products. Also, the TPH content was analyzed by compensating the defect of current Korea standard analytic methods for soil where the analytic range is just for $C_8{\sim}C_{40}$. The light distillate petroleum products such as gasoline and solvent 1 showed the maximum of 85% difference in the TPH content between the standard analytic and improved methods.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.132-138
• /
• 1997

The antimicrobial activity of Manuka oil, a steam distillate from Leptospermum scoparium, was investigated, and it's MIC against ten kinds of microorganisms was determin ed. MICs against bacteria and fungi were measured by means of both two-fold dliution method and agar plate two-fold dilution method, respectively. MICs of Manuka oil against Staphylococcus aureus KCTC 1916 and Micrococcus luteus KCTC 1915, gram-positive microrganisms, were identical as 3.05 ${\mu}$g/ml, while it's antibacterial activity against gram-negative microrganisms such as Pseudomonas aeruginosa KCTC 2513, Escherichia coli KCFC 1682, Klebsiella pneunioniae KCTC 2001 or Proteus vulgaris KCTC 2433 was negligible(MIC: ${\geq}$ 1000 ${\mu}$g/ml), suggesting a high susceptibility of gram-positive bacteria to Manuka oil. In addition, MIC against Aspergillus niger KCTC 6077 was 24 ${\mu}$g/ml. and that against the other fungi, Tricophyton mentagrophytes KCTC 1374 and Candida albicans KCTC 1940 was ${\geq}$ 1000 ${\mu}$g/ml. When Manuka oil ointment was used in combination with other drugs. i.e.. gentamycin sulfate, chlotrimazol and hydrocortisone acetate, and diphenhydramine HCl and hydrocortisone acetate. it's antibacterial activity against Staphylococcus aureus KCTC 1916 was higher than Manuka oil ointment or other drugs alone. In conclusion, Manuka oil possesses a selective antibacterial activity against Staphylococcus aureus KCTC 1916, and can be used as a potent antibacterial agent against it.

• Membrane and Water Treatment
• /
• v.13 no.5
• /
• pp.235-243
• /
• 2022

The paper presents the effect of operating temperatures and flow rates on the distillate flux that can be obtained from a hydrophobic membrane having the characteristics: pore size of 0.15 ㎛; thickness of 130 ㎛; and 85% porosity. That membrane in the present investigation could be the direct contact (DCMD) or the air-gap membrane distillation (AGMD). To model numerically the membrane distillation processes, the two-dimensional computational fluid dynamic (CFD) is used for the DCMD and AGMD cases here. In this work, DCMD and AGMD models have been validated with the experimental data using different flows (Parallel and Counter-current flows) in non-steady-state situations. A good agreement is obtained between the present results and those of the experimental data in the literature. The new approach in the present numerical modeling has allowed examining effects of the nature of materials (Polyvinylidene fluoride (PVDF) polymers, copolymers, and blends) used on thermal properties. Moreover, the effect of the area surface of the membrane (0.021 to 3.15 ㎡) is investigated to explore both the laminar and the turbulent flow regimes. The obtained results found that copolymer P(VDF-TrFE) (80/20) is more effective than the other materials of membrane distillation (MD). The mass flux and thermal efficiency reach 193.5 (g/㎡s), and 83.29 % using turbulent flow and an effective area of 3.1 ㎡, respectively. The increase of feed inlet temperatures and its flow rate, with the reduction of cold temperatures and its flow rate are very effective for increasing distillate water flow in MD applications.

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.11-17
• /
• 2002

Fermentation characteristics with/without nitrogen source and quality of the fruit distillate of Opuntia ficus-indica var. saboten were investigated during the manufacturing process of a Korean traditional liquor. As the fermentation period increased, acidity, brix degree, and alcohol concentration increased, whereas pH and contents of reducing sugar decreased. Acidity, pH, and brix degree were higher, whereas the content of reducing sugar lower, in the nitrogen source-added distillate than in the distillate without nitrogen source. The growth of yeast increased, while that of bacteria decreased; this trend was more prominent with the addition of a nitrogen source. Sojues, distilled from two types of mashes and diluted with $H_2O$ and tails of distillate into 22% alcohol concentration, showed pH $3.7{\sim}4.0$, acidity $0.02{\sim}0.10$, and $5.4{\sim}6.1$ $^{\circ}Brix$. Analysis through GC using direct injection methods revealed common volatile flavor compounds in sojues, including acetaldehyde, acetyl acetone, acetic acid ethyl ester, ethyl alcohol, 2-propyl alcohol, acetone, n-propyl alcohol, butanoic acid methyl ester, 2-phenyl ethanol, thymol, acetic acid phenyl ester, and vanillic aldehyde. As revealed through the sensory evaluation, no significant difference (p>0.05) in overall acceptability was shown among four experimental groups, while color and flavor showed significant differences(p<0.05).

• Membrane and Water Treatment
• /
• v.1 no.1
• /
• pp.1-12
• /
• 2010

Membrane distillation process was used for purification of pre-treated natural water (tap water). The rejection of inorganic and organic compounds in this process was investigated. The obtained rejection of inorganic solutes was closed to 100%, but the volatile organic compounds (VOCs) diffused through the membrane together with water vapour. The content of trihalomethanes (THMs) in the obtained distillate was two-three fold higher than that in the feed, therefore, the rejection of the total organic compounds present in the tap water was reduced to a level of 98%. The intensive membranes scaling was observed during the water separation. The morphology and composition of the fouling layer was studied using scanning electron microscopy coupled with energy dispersion spectrometry. The influence of thermal water pre-treatment performed in a heat exchanger followed by filtration on the MD process effectiveness was evaluated. This procedure caused that significantly smaller amounts of $CaCO_3$ crystallites were deposited on the membrane surface, and a high permeate flux was maintained over a period of 160 h.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.9-18
• /
• 1995

The substitution of conventional fuel oil by alternative fuels is of immense interest due to liquid oil shortage and requirements of emission control standard. Among the alternative fuels, natural gas may be the most rational fuel, because of its widespread resource and clean est burning. Meanwhile, engine simulation is of great importance in engine development. Hence a zero-dimensional combustion model was developed for dual-fuel system. Natural gas was injected directly into the cylinder and small amount of distillate was used to provide the ignition kernel for natural gas burning. The intake air and exhaust gas flow was modeled by filling and emptying method. Although the single zone approach has an inherent limitation, the model showed promise as a predictive tool for engine performance. Its simulation was also made to see how the engine performance was influenced by the fuel injection timings and amount of each fuel.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1984.12a
• /
• pp.84-91
• /
• 1984

Heavy Residual Fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as Heavy Fuel Oil for large combustion engines, boilers, etc…. But this study was made to investigate Heavy Residual Fuel oils for using as industrial raw material and resulted the following possibilties as valuable raw material as well as Heavy Fuel Oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of Blown Asphalts, Cut Back Asphalts, Emulsified Asphalts and Asphalt Compound, etc…. 3) Using waxy oil side streams for manufacturing of raw oil to be Lube Oil base stocks through solvent dewaxing. 4) Production of lube base oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.06a
• /
• pp.10-20
• /
• 1986

I. 윤활기유 제조시설소개 개요 1) 고급 윤활기유(HVI)생산공장으로서 그간 수입에만 의존하던 최고급 품질의 기유를 국내 수요업체에 안정공급 2) 세계 최신 공정인 Gulf Lube Oil Hydrotreating Process Type III (수소첨가 개질공정)채택 3) 국내 최초일뿐 아니라, 세계에서도 일본, 카낟에 이어 3번째로 건설 1. 고품질 제품 생산-고점도 지수, 산화안정성 및 열안정성 우수, 잔류탄소분, 윤황분, 질소분 극소, 방향족 성분 및 회분 극소, 색상 양호 2. 첨가제(특히 산화방지제 및 점도 지수 향상제)사용효과 상승으로 완제품 생산시 생산비 감소 3. 동일 VI 제품 생산기준 수율이 높음 - Hydrocarbon Structure 변화로 원료 유중 부적합성분의 윤활기유화 4. Severity 조절로 Production Mode 변경 용이 5. 양질의 부산물 생산 - HDT Naphtha, Middle distillate 6. 용제 추출기유는 원유종류 및 성상에 따라 제품특성이 결정되나, 사용가능 원유가 다양 하면서도 제품특성 및 품질이 일정함.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.162-169
• /
• 1997

The particle size effect on the combustion characteristics of pulverized coal was investigated in the cylindrical-shape, horizontal furnace, fired in the range of 8.8∼10.6 kw. Three differently-sized fractions (5, 30, and 44 microns in average diameter) of high-volatile bituminous coal, were burned in the test furnace. Burnout behavior of pulverized coal flame were determined through the measurement of stable species concentrations (CO$_2$and H$_2$O). Concentrations of CO$_2$were compared with the theoretical values and the result showed good agreement. Thermal behavior of pulverized coal flame were determined as maximum flame temperatures occurred at fuel-rich conditions in every case. Flame lengths were also determined by decreasing with the particle size decrease. The flame length of the fine sized coal sample was comparable to that produced by distillate oil. The color of the coal flames ranged from orange to yellow, with the flame of the fine size fraction being brighter and yellower than the others.