• 정보과학회 논문지
• /
• 제41권11호
• /
• pp.900-910
• /
• 2014

다시점 비디오는 하나의 3차원 장면을 여러 시점에서 다수의 카메라로 촬영 영상으로 다시점 비디오 부호화의 계산량은 카메라 수에 비례하여 증가한다. 본 논문에서는 다시점 비디오 부호화의 계산량을 줄이면서 영상 화질을 유지하는 예측 구조와 움직임 추정 기법을 제안한다. 제안한 개선된 예측 구조는 B계층 최대 인덱스 그리고 각 Bi계층의 화면수를 고려하였다. 제안한 움직임 추정 기법은 계층적인 탐색 기법으로 수정된 다이아몬드 탐색 패턴, 점진적인 다이아몬드 탐색 패턴 그리고 수정된 래스터 탐색 패턴으로 구성된다. 제안한 예측 구조와 움직임 추정 기법의 성능을 Fraunhofer-HHI의 계층적 B화면 구조와 TZ 움직임 추정 기법을 사용한 JMVC 참조 모델의 성능과 비교한 경우, 영상 화질과 발생 비트량은 비슷하지만 다시점 비디오 부호화의 계산량을 40~70% 줄인다.

• 방송공학회논문지
• /
• 제11권4호
• /
• pp.420-430
• /
• 2006

본 논문에서는 다시점 동영상 부호화를 위한 참조 소프트웨어의 부호화기 성능을 높이기 위해 가변형 다시점GOP 예측 구조로 부호화 하는 방법을 제안한다. 다시점 동영상 부호화를 위한 참조 소프트웨어에서는 고정된 시공간 예측구조를 사용하여 다시점 동영상을 부호화한다. 그러나 다시점 동영상 부호화의 성능은 영상의 특성에 따라 예측 부호화 구조를 가변적으로 변경하는 것에 영향을 받는다. 따라서 다시점 동영상의 전역 변이를 이용하여 부호화의 기준 시점을 정하고 카메라 간의 간격을 고려하여 B-픽쳐의 개수를 조절하여 영상의 특성에 따라 다시점 동영상의 부호화 단위인 다시점GOP 예측 구조를 가변적으로 적용하는 방법을 제안한다. 실험 결과에서 제안된 가변형 다시점GOP 예측구조의 부호화 방법이 기존의 참조 소프트웨어보다 우수한 성능을 보여줌을 확인하였다. 제안 예측 부호화 구조는 기존의 부호화 구조와 비교하여 7.1%의 비트량 감소를 보였다.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.69-74
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV image. UV camera developed a $6.4[^{\circ}]{\times}4.8[^{\circ}]$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. UV camera to measure the discharge count and the UV image was developed, compared with a commercial camera, there was no significant difference. In salt spray environments breakdown voltage was lower than the normal state, thereby discharging the image was rapidly growing phenomenon.

• Journal of applied mathematics & informatics
• /
• 제6권2호
• /
• pp.669-684
• /
• 1999

We are interested in the problem of fitting a curve to a set of points in the plane in such a way that the sum of the squares of the orthogonal distances to given data points ins minimized. In[1] the prob-lem of fitting circles and ellipses was considered and numerically solved with general purpose methods. Especially in [2] H. Spath proposed a special purpose algorithm (Spath's ODF) for parabolas y-b=$c($\chi$-a)^2$ and for rotated ones. In this paper we present another parabola fitting algorithm which is slightly different from Spath's ODF. Our algorithm is mainly based on the steepest descent provedure with the view of en-suring the convergence of the corresponding quadratic function Q(u) to a local minimum. Numerical examples are given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.442_443
• /
• 2009

A large wind farm should satisfy the requirements for a grid and accomplish the optimization of the wind farm system. In that point of view, the wind farm intertie protection system, which must consider the Fault Ride-Through (FRT) requirement for more reliable protection, should be improved. This paper proposes a modified distance relay suitable for protection of a wind farm intertie considering a FRT requirement. The frequency change is used to discriminate the intertie fault from a outside zone fault. The performance of the proposed algorithm is verified using a PSCAD/EMTDC simulator.

• 대한수학회논문집
• /
• 제17권1호
• /
• pp.121-142
• /
• 2002

We are interested in the curve fitting problems in such a way that the sum of the squares of the orthogonal distances to the given data points is minimized. Especially, the fitting an ellipse to the given data points is a problem that arises in many application areas, e.g. computer graphics, coordinate metrology, etc. In [1] the problem of fitting ellipses was considered and numerically solved with general purpose methods. In this paper we present another new ellipse fitting algorithm. Our algorithm if mainly based on the steepest descent procedure with the view of ensuring the convergence of the corresponding quadratic function Q(u) to a local minimum. Numerical examples are given.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.48-54
• /
• 1996

Examined in this paper, is the effect of B$_{4}$C addition on the frictional characteristics of Cu-Sn based sintered friction materials. For the specimens 1wt%, 2wt% and 4wt% of B$_{4}$C were added into the reference material. A pin-on-disk type friction tester was used to,measure the friction torque with respect to the surface temperature and sliding distance. Wear mechanism of each specimen is analyzed in the view point of the oxide film formation. The specimen containing 4wt% of B$_{4}$C showed stable friction and low wear since the oxide film was sustained up to higher surface temperature ranges.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.836-839
• /
• 1996

Throughout CGL (Continuous Galvanizing Line) in steel works, zinc-coated steel sheets are produced which are used where long-running corrosion resistivity is required. During the galvanizing process, top dross is created and floated on the zinc pot. Because the dross leaves ill patterns on the coated sheets, a robot system is developed to automatically collect and remove the top dross. It consists of a robot and its carriage system, a pot level sensor, a system controller, and special robot tools. For the first time the level of zinc pot must be measured and fed back to the robot controller to avoid submersion of the robot hand into the hot zinc pot. In this paper, acoustic distance sensor is tested as a candidate for the pot level sensor in the view point of hot environment. Some considerations on the use of the acoustic distance sensor will be denoted.

• 한국컴퓨터정보학회논문지
• /
• 제21권10호
• /
• pp.55-62
• /
• 2016

In this paper, we present indoor localization technologies using the bluetooth signal categorizing them into proximity based, triangulation based and fingerprinting based technologies. Then we provide localization accuracy improvement algorithms such as moving average, K-means, particle filter, and K-Nearest neighbor algorithms. We define important performance issues for indoor localization technologies and analyze recent technologies according to the performance issues. Finally we provide experimental results for correlation between RSSI and distance. We believe that this paper provide wise view and necessary information for recent localization technologies using the bluetooth signal.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.252-257
• /
• 2010

SAR has pulse compression gain through the process including range and azimuth. Efficient jammers against the SAR with simulated elements are evaluated in the view of power and SAR image. In this paper, J/S is analysed for SAR with RF propagation equation firstly. Several jamming signals on SAR signal are made into SAR image through pulse compression process. Objective jamming performance is evaluated using euclidean distance.