• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.783-788
• /
• 2004

Many reported methods assume that the faces in an image or an image sequence have been identified and localization. Face detection from image is a challenging task because of the variability in scale, location, orientation and pose. The difficulties in visual detection and recognition are caused by the variations in viewpoint, viewing distance, illumination. In this paper, we present an efficient linear discriminant for multi-view face detection and face location. We define the training data by using the Fisher`s linear discriminant in an efficient learning method. Face detection is very difficult because it is influenced by the poses of the human face and changes in illumination. This idea can solve the multi-view and scale face detection problems. In this paper, we extract the face using the Fisher`s linear discriminant that has hierarchical models invariant size and background. The purpose of this paper is to classify face and non-face for efficient Fisher`s linear discriminant.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.2
• /
• pp.74-85
• /
• 1996

The objective of this study is to investigate the influence of viewing aspects based on formal aesthetics and psychophysica approaches of the MAISAN provincial park for landscape management. Two methods are applied in this study. First, according to the field study with map the quantitative analyses of the viewshed area, visual section and scenery types were achieved, herein the visual landscape characteristics is found. Second, based upon visual preference evaluation of the relationships between the viewing aspects and visual preference scores to landscape slides were measured by questionnaires. The main conclusions obtained by the research are as follows. Visual area of MAISAN has a quite wide viewshed though itself is surrounded. The preference for the visual terminal were change by its characteristics to the visual corridors, view points, viewing types and viewing distance. Especially, the regression analysis between visual preference and viewing distance indicated Y=-3.20X\sup 2\+18.64X+20.64. In this case, viewing distance 794m from O\sub p\ is more important point for visual experience. The viewing types B·C and famous view A obtained a high visual preference score. A visual terminus are viewed along an entire RouteA, so revealed by its evolving spatial containment as to exact the full potential of its changing perspectives. Also we conducted the degree of visual influence by the shade in visual area at MAISAN and clarified viewing vantage Route and point in LSH being necessary for landscape preservation.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.3
• /
• pp.185-191
• /
• 2016

Background: Failure to maintain a patent airway can result in brain damage or death. In patients with mandibular prognathism or retrognathism, intubation is generally thought to be difficult. We determined the degree of difficulty of airway management in patients with mandibular deformity using anatomic criteria to define and grade difficulty of endotracheal intubation with direct laryngoscopy. Methods: Measurements were performed on 133 patients with prognathism and 33 with retrognathism scheduled for corrective esthetic surgery. A case study was performed on 89 patients with a normal mandible as the control group. In all patients, mouth opening distance (MOD), mandibular depth (MD), mandibular length (ML), mouth opening angle (MOA), neck extension angle (EXT), neck flexion angle (FLX), thyromental distance (TMD), inter-notch distance (IND), thyromental area (TMA), Mallampati grade, and Cormack and Lehane grade were measured. Results: Cormack and Lehane grade I was observed in 84.2%, grade II in 15.0%, and grade III in 0.8% of mandibular prognathism cases; among retrognathism cases, 45.4% were grade I, 27.3% grade II, and 27.3% grade III; among controls, 65.2% were grade I, 26.9% were grade II, and 7.9% were grade III. MOD, MOA, ML, TMD, and TMA were greater in the prognathism group than in the control and retrognathism groups (P < 0.05). The measurements of ML were shorter in retrognathism than in the control and prognathism groups (P < 0.05). Conclusions: Laryngoscopic intubation was easier in patients with prognathism than in those with normal mandibles. However, in retrognathism, the laryngeal view grade was poor and the ML was an important factor.

• Physical Therapy Korea
• /
• v.15 no.4
• /
• pp.64-69
• /
• 2008

The purpose of this study was to compare the effectiveness of modified vertical roll sling and conventional Bobath roll sling in reducing hemiplegic shoulder subluxation. Radiography of $40^{\circ}$ anterior oblique radiographic view' were taken, before and immediately after wearing each sling in 13 hemiplegic patients. The vertical distance. horizontal distance. and joint distance were measured. Analysis of radiographically measured distances showed that both modified vertical roll sling and Bobath roll sling decreased vertical, horizontal. and joint distances. Reduction in vertical and joint distances were significantly greater in modified vertical roll sling compared to Bobath roll sling. while horizontal distance showed no significant difference between the two slings. Therefore it can be concluded that modified vertical roll sling is an effective orthosis in reducing hemiplegic shoulder subluxation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.3
• /
• pp.239-247
• /
• 2008

Hydrogen production facility using very high temperature gas cooled reactor lies in situation of high temperature and corrosion which makes hydrogen release easily. In that case of hydrogen release, there lies a danger of explosion. However, from the point of thermal-hydraulics view, the long distance of them makes lower efficiency result. In this study, therefore, outlines of hydrogen production using nuclear energy are researched. Several methods for analyzing the effects of hydrogen explosion upon high temperature gas cooled reactor are reviewed. Reliability physics model which is appropriate for assessment is used. Using this model, leakage probability, rupture probability and structure failure probability of very high temperature gas cooled reactor are evaluated and classified by detonation volume and distance. Also based on standard safety criteria which is value of $1{\times}10^{-6}$, safety distance between the very high temperature gas cooled reactor and the hydrogen production facility is calculated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.276-281
• /
• 2008

Because the distribution systems experience frequently the fault by several causes, the identification task of fault location plays very important role in the view point of power supply reliability. The distribution systems are designed as radial structure with three-phase and single-phase branch line to supply the electric power to the widely dispersed loads, and it have a several load taps within each line segment. it makes the accurate fault distance determination difficult. Accordingly in this papers, the existing fault point determination methods are surveyed and analyzed, and then a fault distance determination method for distribution feeder is adopted which can be executed effectively in DAS center. Finally, the adopted method is verified using EMTP simulation.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.11-20
• /
• 2015

In this work, Monte Carlo simulation was employed to model the stretchable Ising monolayer film to investigate the effect of the spatial distance variation among magnetic atoms on magnetic behavior of the film. The exchange interaction was considered as functions of initial interatomic distance and the stretched distance (or the strain). Following Bethe-Slater picture, the magnetic exchange interaction took the Lennard-Jones potential-like function. Monte Carlo simulations via the Wolff and Metropolis algorithms were used to update the spin systems, where equilibrium and dynamic magnetic profiles were collected. From the results, the strain was found to have strong influences on magnetic behavior, especially the critical behavior. Specifically, the phase transition point was found to either increase or decrease depending on how the exchange interaction shifts (i.e. towards or away from the maximum value). In addition, empirical functions which predict how the critical temperatures scale with initial interatomic distance and the strain were proposed, which provides qualitatively view how to fine tune the magnetic critical point in monolayer film using the substrate modification induced strain.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.745-754
• /
• 2023

In order to test the recognition ability and accuracy of a target imaging simulator under the irradiation of solar stray light in a laboratory environment, it needs to be fixed on a five-axis turntable during a hardware-in-the-loop simulation test, so the optical system of the simulator should have a long exit pupil distance. This article adopts a secondary imaging method to design a projection optical system suitable for thin-film-transistor liquid crystal displays. The exit pupil distance of the entire optical system is 1,000 mm, and the final optimization results in the 400 nm-850 nm band show that the modulation transfer function (MTF) of the optical system is greater than 0.8 at the cutoff frequency of 72 lp/mm, and the distortion of each field of view of the system is less than 0.04%. Combined with the design results of the optical system, TracePro software was used to model the optical system, and the simulation of the target imaging simulator at the magnitude of -1 to +6 Mv was analyzed and verified. The magnitude error is less than 0.2 Mv, and the irradiance uniformity of the exit pupil surface is greater than 90%, which meets the requirements of the target imaging simulator.

• Journal of Broadcast Engineering
• /
• v.25 no.2
• /
• pp.265-274
• /
• 2020

Free-viewpoint video service is a technology that allows users to watch at any angle, location and distance through interaction. In this paper, the free-viewpoint video services are defined in four viewing modes: Inward view, outward view, 3D object view and first person view. And we developed and implemented a new integrated program that plays all the suggested views. In the contents of girl band performances and basketball games, multi-view cameras suitable for each viewing mode are installed to acquire media, and data stored on the server is streamed over the network, making it available for viewing. Users can freely choose four viewing modes, space location, angle and so on, and the media data such as images and sounds are provided to them by rendering appropriately for the selected the viewpoint. Our system is expected to be a scalable free-viewpoint video service player as well as provide users with immersion and presence by combining various viewing modes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.137-148
• /
• 2004

In this paper, we propose a new camera calibration method for rotating multi-view cameras to generate image-based panoramic 3D Virtual Environment. Since calibration accuracy worsens with an increase in distance between camera and calibration pattern, conventional camera calibration algorithms are not proper for panoramic 3D VE generation. To remedy the problem, a geometric relationship among all lenses of a multi-view camera is used for intra-camera calibration. Another geometric relationship among multiple cameras is used for inter-camera calibration. First camera parameters for all lenses of each multi-view camera we obtained by applying Tsai's algorithm. In intra-camera calibration, the extrinsic parameters are compensated by iteratively reducing discrepancy between estimated and actual distances. Estimated distances are calculated using extrinsic parameters for every lens. Inter-camera calibration arranges multiple cameras in a geometric relationship. It exploits Iterative Closet Point (ICP) algorithm using back-projected 3D point clouds. Finally, by repeatedly applying intra/inter-camera calibration to all lenses of rotating multi-view cameras, we can obtain improved extrinsic parameters at every rotated position for a middle-range distance. Consequently, the proposed method can be applied to stitching of 3D point cloud for panoramic 3D VE generation. Moreover, it may be adopted in various 3D AR applications.