• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.175-177
• /
• 1996

This paper is studied on the numerical analysis of temperature distribution on the Nb-foil due to the eddy current under operating a superconducting power supply. The increase of rotating speed and magnetic flux above critical magnetic field lead to the temperature rising in the normal spot, the heat was distributed in the region of 30% distance from the center of the normal spot, but the most of the heat was transferred to LHe. Under operation of the sc power supply, the increase of rotation speed has the more influence on the temperature rising than that of magnetic flux. we can conclude that the totaling speed of normal spot is the main design consideration of the sc power supply, and get the optimal value of rotating speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.42-48
• /
• 2005

Because Impinging jet has excellent heat & mass transfer characteristics. it has many advantages of cooling. drying. etc and widely applied at industrial fields. Therefore, there have been many experimental investigations and theoretical studies about Impinging jet. The present study is about a cooling characteristic by Impinging jet for a Square Plate on Duct and investigated this characteristic through three-dimensions numerical analysis, using FLUENT. As the result of this study, heat transfer effect is the most appropriate condition when the ratio of distance is 6 between nozzle exit diameter and heat source. diameter of duct is 90mm and height of duct is 60mm. In addition. under the influence of injected jet. stagnant fluid flow into free jet field and this affected the whole flow field. So the shape of duct is a important factor and the researcher confirmed the need of investigation about duct.

• Water for future
• /
• v.17 no.3
• /
• pp.197-209
• /
• 1984

This study has been carried out to investigate into the local scour of wall-toe and the beach deformation caused by the construction of a seal wall. It has been performed to determine the values of the marine invertigation of HAE UN DAE and two dimensional Movable bed gydraulic model test. From the results of this work approtection method of HAE UN DAE beach erosion is established to reduce the amount of topography deformation by investigating the values of the constructive position of a sea wall, seabed slope, the maximum scour depth, the first and the second influence range, the maximum quantity of beach deformation, and the distance measured from the sea will to the maximum quantity of beach deformation.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.23-26
• /
• 2009

The trend that an apartment is regarded as not only a substantial property called 'residence' but also 'means of self-expression' to consumers is increasing in the present housing marketing, and thus, the apartment brand image is settling down as an important field of marketing management. Therefore, the present study aimed to verify difference of brand attitude according to consentaneity between an image of a housing brand and self-image of consumers to propose one kind of direction of strategies for formation of a differentiated brand image. As a result of a research, the trend that consumers show more positive attitude on a brand apartment having a brand image closer to an ideal self-image was analyzed to exist even if it is weak, so it was confirmed that the consentaneity between a brand image and a self-image of housing products can become a variable having some influence on brand attitude. The survey method understood a brand image, a self-image and brand attitude by using a Likert's 5-point scale on apartment brands of upper three companies according to a study result of a national brand competitiveness index(NBCI) and understood self-consentaneity by using a distance measurement model of self-consentaneity of Sirgy(1982). The questionnaire for the present research was carried out by surveying students of D university and the PASW program was used for statistical data analysis.

• Journal of Korean Academy of Nursing
• /
• v.44 no.4
• /
• pp.381-390
• /
• 2014

Purpose: The purpose of this study was to identify the effects of a Progressive Walking program (PW) on physical activity, exercise tolerance, recovery, and post-operative complications for patients with a lung resection. Methods: A nonequivalent control group non-synchronized design was utilized and 37 participants with a lung resection (22 for control group, 15 for experimental group) were recruited at A university hospital from December 2012 to August 2013. The PW consisted of preoperative education, goal setting, and feedback, provided to the experimental group, and usual care to the control group. Data were analyzed using the SPSS WIN 18.0. Results: A higher proportion of patients in the experimental group showed adequate levels of physical activity (p=.001), shorter period of chest tube retention (${\leq}7$ days; p=.011), and shorter stay in the hospital (${\leq}10$ days; p=.036) than patients in the control group. Patients in the experimental group reported longer 6-minute walking distance (p=.032) and lower levels of dyspnea (p=.049) than patients in the control group. The PW did not influence the occurrence of pulmonary complications. Conclusion: The findings of this study suggest that the PW could be a useful strategy for improving patients' post-operative health and reducing cost after lung resection.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.4
• /
• pp.28-36
• /
• 1995

The use of image planes can reduce effectively the radiated emissions from a printed circuit board. This work deals with the influence of image planes on radiation from current trace. The configu- rations of one and two layers of image planes on both sides of current trace are proposed. The radiated emissions of those configurations have been calculated by solving a set of electric field integral equations by the method of moments. The induced current distributions on image planes and the radiation patterns are analyzed for different configurations of image planes, the distance between current trace and image planes, and the frequency of signal current.

• Journal of Environmental Health Sciences
• /
• v.32 no.1 s.88
• /
• pp.89-95
• /
• 2006

This study was conducted to improve an effect of phosphorus removal using FNR(Ferrous Nutrient Removal) process which had iron precipitation reactor and to analyze the iron corrosion. For simultaneous removal of phosphorus, iron electrolysis was combined with oxic tank. In this study, The removal efficiency of phosphorus increased with an increase voltage in iron precipitation reactor. The distance of 15mm between the two iron bed in each tests influence the concentration of remaining phosphorus most. The extensive surface area of iron bed is the more removes the phosphorus. In this test the $400\;cm^2$ of surface area was proved to be the most removal efficient.

• Korea Journal of Hospital Management
• /
• v.19 no.4
• /
• pp.9-20
• /
• 2014

The purpose of this study is to find out factors affecting patient moving to receive medical service. This study is analyzed by multi-level model with patient and hospital level by using SAS 9.3. Total number of patients is 600,000 persons for inpatients and 550,000 patients for outpatients. The degree of the factors, which is combined with personnel factor and hospital factor, can be analyzed by Intra-Class Correlation (ICC). The percentage of group(hospital) level variance of the total variance for out-bound moving case are 30.6% at inpatients, and 28.3% at outpatients. And the percentage of hospital level variance of the total variance for moving distance, are 26.7%, 32,5% respectively. Conclusionally, although the main factor of moving is patient level, hospital is also very important factor to make decision to go out-bound. It contributed to about 1/3 for hospital choice. And, when the one make decision, he will consider the hospital type, number of bed, and training institute in hospital level. Through this study to find out hospital factors affecting patient moving for medical service, it must be continued to find out which factors have more influence to choice the hospital among disease type after this.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1448-1453
• /
• 2004

The major parameters governing the fluid dynamical and thermo-dynamical behavior in the large pipeline network system are friction loss and the pipeline length. But in local pipeline networks and relatively short distance pipeline system, secondary loss and the considerations of the moving states of the fluid machine are also important. One of the major element in local pressure control system is pressure regulator. It causes the variations of the physical properties in that pipeline system. Especially, as there is not enough information to obtain reliable physical property values such as density, temperature etc. at the downstream of the pressure regulator, It is hard to calculate accurate solution in the pipeline network analysis. In this study, some numerical approaches to investigate the critical-flow-characteristics of the pressure regulator have been done and the detail examinations and considerations of the pressure regulator as a pipeline network elements according to the variations of the inlet-outlet pressure ratio have been carried. Finally the flow-flied distributions, relations and critical-flow-characteristics have been studied. in detail and the 1D analytic method to analyze critical pipe flow have been investigated

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1454-1459
• /
• 2004

The major parameters governing the fluid dynamical and thermo-dynamical behavior in the large pipeline network system are friction loss and the pipeline length. But in local pipeline networks and relatively short distance pipeline system, secondary loss and the considerations of the moving states of the fluid machine are also important. One of the major element in local pressure control system is pressure regulator. It causes the variations of the physical properties in that pipeline system. When it is under working, the accurate analysis of the flow properties is so difficult. In this study, some numerical approaches to investigate the critical-flow-characteristics of the pressure regulator have been done according to the variations of the opening ratio or cross-sectional area and the detail examinations and considerations of the pressure regulator as a pipeline network elements have been carried. Finally the flow-flied distributions and critical-flow-characteristics have been presented in detail and the critical flow phenomena and the relation to the opening ratio or cross-sectional-area ratio have been studied.