• The Journal of Engineering Geology
• /
• v.12 no.1
• /
• pp.1-21
• /
• 2002

Recently, the rapid industrialization and urbanization of the country due to a high economic growth, require optimization, usage and the expansion of underground space. Therefore the consturction of large and deep basements takes place in braced excavated area where their earth retaining structures cause many problems such as settlement and damages of nearby buildings and underground utilities. this study deals with the influence distance of settlement and the amount for settlement based on the measurement which were obtained at five excavation construction sites. Maximum ground surface settlement, (0.28∼0.3)(%)H utilizing depth, is similar to the measurement and the value by Clough's method. It was found that the settlement and the influence distance of settlement calculated by Clough's method were rational.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.1040-1050
• /
• 1995

The Purposes of this study were to investigate the choice dimensions in purchasing the medium-low priced casual clothing, the influence of them on the preference of medium-low priced casual clothing, and the brand images of six medium-low priced casual clothing using the perceptual map. The Questionnaires were administered to 540 college students living in Seoul (340) and County of Chungnam(200). The data were analyzed by frequency, factor analysis and multiple regression analysis. The results were summarized as follows: 1) The choice dimensions in purchasing the medium-low price casual clothing were identified as exclusiveness/style, intrinsic characteristics, promotion and price/distance. 2) Exclusiveness/style dimension influenced most on the preference of medium-low priced casual, intrinsic characteristics, price/distance dimension were followed. Promotion dimension appeared to have an insignificant influence. These results were consistent in both Seoul and the County of Chungnam. 3) Perceptual mapping showed Hunt and J-vim had the best brand images, Maypole and Omphalos were followed. Tipi Cosi and I-land appeared to have the worst brand image. The college students living in the County of Chungnam perceived that all six brands of medium low priced casual clothing to be exclusive in their style. In addition, it was perceived less promoted, more expensive and farther than Seoul counterparts.

• Journal of Distribution Science
• /
• v.15 no.12
• /
• pp.21-30
• /
• 2017

Purpose - This research approaches to the new niche market of medical tourism to investigate how factors of cultural similarity influence the international distribution management. This study also estimates the interaction effects of distribution channel on the relationships of facility attributes and customers' destination choice behavior. Research design, data, and methodology - We collected the sample of 881 potential customers from the more economically developed regions in China. Regression analysis is used to confirm the relationships in the research model. Results - The result shows that cultural similarity plays an important moderating role in the relationships of facility attributes and destination choice intention. For instance, power distance and masculinity interact with the distribution facility characteristics of medical quality and reputation to influence customers' selection of the destination country. Individualism, powder distance, and masculinity play moderating roles when social environment affects destination choice intention. Especially, all the elements of cultural similarity moderate the relationships between travel cost and destination choice intention. This research also proves that depending on distribution channel, determinants of distribution facility are the critical predictors of intention to select the medical service outside of China. Conclusions - The study enables managers to develop the more effective strategies reflecting the interaction effects of cultural similarity and distribution channel on customers' decision-making process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.1-8
• /
• 2013

Wireless Visible Light Communication is the technology that enables communication using LED illumination Infrastructure instead of existing illumination such as incandescent lamp or fluorescent light. Because VLC uses light for communication, it has no problem of frequency permission and is harmless to human body. It is also possible to check the communication through eye. So VLC can be used as a supplement to the Radio Frequency communication, Infrared in indoor environment. So far, researchers on the LED Visible light communication have focused on the increasing transmission speed, transmission distance, modulation method. However, there is few research of main factors that influence on system performance. System performance has been mainly predicted through simulation. In this paper, I recognized that these factors such as outside light noise, obstacle, LED panel position or emitted angle have a great impact on wireless communication system. So I experimented VLC system by changing distance and position to discover location suitable for BER regulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.632-635
• /
• 2001

Microcrystalline Si films have been deposited by using five W-wire filaments of 0.5 mm diameter for hot-wire chemical vapor deposition (HWCVD). We compared the HWCVD grown films with the film exposed to transformer couple plasma system for the modification of seed layer. W-wire filament temperature was maintained below 1600$^{\circ}C$ to avoid metal contamination by thermal evaporation at the filament. Deposition conditions were varied with H$_2$dilution ratio, with and without plasma treatment. From the Raman spectra analysis, we observed that the film crystallization was strongly influenced by the H$_2$dilution ratio and weakly depended on the distance between the wire and a substrate. We were able to achieve the crystalline volume fraction of about 70% with an SiH$_4$/H$_2$ratio of 1.3%, a wire temperature of 1514$^{\circ}C$, a substrate separation distance of 4cm, and a chamber pressure of 38 mTorr. We investigated the influence of ${\mu}$c-Si film properties by using a plasma treatment. This article also deals with the influence of the H$_2$dilution ratio in crystallization modification.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.113-116
• /
• 1998

This study should investigate to what extent the electric field of a vacuum interrupter might be influenced by the electric potential of floating arc shield. The electric potentials of floating shield and electric fields of a vacuum interrupter are analysed by a finite element method against variation of gap distances from 1mm to 12mm. The electric potentials of floating shield was increased with the gap distance, which is because the relative position of shield is closer to fixed contact so that the capacitance distribution inside interrupter is varied. The calculated results show that the maximum value of electric field of a vacuum interrupter with floating shield is nearly same to that without shield at shorter gap distance(below 5mm), however at larger gaps a significant increment of electric field is achieved in interrupter with shield companying with model without shield, which is due to the influence of charged floating shield.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.724-729
• /
• 2013

Recently, with the popularization of digital devices, the requirements of image quality is becoming higher and higher. However, the images are frequently corrupted in the image data processing, there are several reasons for this and the noise is considered as the main reason. Therefore, in order to alleviate the influence of AWGN(additive white Gaussian noise) in image, this paper puts forward the spatial weighted filtering algorithm. The algorithm set the weighted value according to the spatial distance, compared with the existing methods. The algorithm not only alleviated the influence of AWGN effectively but also reserved image details.

• Journal of ILASS-Korea
• /
• v.23 no.1
• /
• pp.22-29
• /
• 2018

The purpose of this study is to investigate the macroscopic spray characteristics and spray pattern of a gasoline direct injection (GDI) injector according to the increase of injection pressure. The macroscopic spray characteristics, such as a spray tip penetration and spray angle, were measured and analyzed from the frozen spray images, which are obtained from the spray visualization system including the high-speed camera, light-source, long-distance microscope (LDM). The spray pattern was analyzed through the deviation of the center of the spray plum and images were acquired using Nd: YAG Laser and ICCD(Intensified charge coupled device) camera. From the experiment and analysis, it revealed that the injection pressure have a significant influence on the spray tip penetration and spray pattern. However, the injection pressure have little influence on the spray angle. The increase of injection pressure induced the reduction of a closing delay. In addition, the deviation of spray center increase with the increase of injection pressure and the distance from a nozzle tip.

• Geomechanics and Engineering
• /
• v.19 no.3
• /
• pp.269-282
• /
• 2019

Due to top-coal and immediate roof as cushion layer connecting with support and overlying strata, it can make significant influence on strata behaviors in fully mechanical top-coal caving working face (TCCWF). Taking Qingdong 828 working face as engineering background, $FLAC^{3D}$ and $UDEC^{2D}$ were adopted to explore the influence of top-coal thickness (TCT), immediate roof thickness (IRT), top-coal elastic modulus (TCEM) and immediate roof elastic modulus (IREM) on the vertical stress and vertical subsidence of roof, caving distance, and support resistance. The results show that the maximum roof subsidence increases with the increase of TCT and IRT as well as the decrease of TCEM and IREM, which is totally opposite to vertical stress in roof-control distance. Moreover, although the increase of TCEM and IREM leading to the increase of peak value of abutment pressure, the position and distribution range have no significant change. Under the condition of initial weighting occurrence, support resistance has negative and positive relationship with physical parameters (e.g., TCT and IRT) and mechanical properties (e.g., TCEM and IREM), respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.4
• /
• pp.731-742
• /
• 2018

Recently, the construction of the urban area has been rapidly increasing, and the excavation work of the ground has been frequently performed at the upper part of the existing underground structure. Especially, when the structure is constructed after the excavation of the ground, the loading and unloading process is repeated in the lower ground of the excavation so that it can affect existing underground structures. Therefore, in order to maintain the stability of the existing underground structure due to the excavation of the ground, it is necessary to accurately grasp the influence of the excavation and the structure load in the adjoining part. In this study, the effects of the ground excavation and the new structure load on the existing tunnel were investigated by large - scale experiment and numerical analysis. For this purpose, a large model tester with a size reduced to 1/5 of the actual size was constructed, and model tests and numerical analyzes were carried out to investigate the effects of the excavation of the body ground by maintaining the distance between the excavation floor and the tunnel ceiling constant, The impacts were identified. As a result of the study, it was confirmed that the deeper the excavation depth, the larger the influence on the existing tunnel. At the same distance, it was confirmed that the tunnel displacement increased with the increase of the building load, and the ground stress increased up to 2.4 times. From this result, it was confirmed that the effect of the increase of the underground stress on the existing tunnel is affected by the increase of the building load, and the influence of the underground stress is decreased from the new load width above 3.0D.