• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.441-455
• /
• 2003

The most common water types are found to be Ca-$HCO_3$, Ca-Na-$HCO_3$ and Ca-Na-$HCO_3$-Cl in Gwangju groundwater. Groundwater near the Gwangju stream are characterized Ca-Cl water type, with over 50 mg/L of C1- and 400 ${\mu}$S/cm of EC. The systematic variation of $Cl^-$, $HCO_3^-$,- EC and ${\gamma}^{18}O$ values in groundwater with distance away from drainages is caused by streamwater infiltration. Stable isotope data indicate that ${\gamma}$D and ${\gamma}^{18}O$ values of groundwaters near drainages were enriched by evaporation effect, showing a equation of ${\gamma}$D=7. 1${\times}{\gamma}^{18}O$-1. ${\gamma}^{18}O$ values over -6${\textperthansand}$ are anomalous in the unconfined groundwater zones, which are influenced by the local surface water enriched in $^{18}O$ composition. Groundwater in highland shows remarkably light ${\gamma}^{18}O$ values below -8$\textperthousand$. The infiltration of streamwater is dominant in unconfined alluvium aquifer near drainages. ${\gamma}^{13}$CDIC values (-17.6∼-15.2$\textperthousand$) of groundwaters near drainages revealed that dissolved inorganic carbon (DIC) is predominantly originated from natural soil-derived $CO_2$. ${\gamma}^{15}N$ and ${\gamma}^{18}O$ values of nitrate are 0∼17.0${\textperthansand}$ and 6.6∼17.4${\textperthansand}$, respectively. Relationship between ${\gamma}^{15}N$ and ${\gamma}^{18}O$ shows a systematic isotopic fractionation caused by denitrification of 40∼60%, suggesting that the major source of groundwater nitrate originated from nitrate of soils, and mixing nitrate of soil and sewage or manure.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.693-700
• /
• 1996

Background : Antituberculous therapy is set a short-term therpy used isoniazid(INH), rifampin(RFP), ethambutol(EMB), pyrazinamide(PZA) from 1970s' and treatment rate has been very improved. But drug interruption or irregular medication due to side effects and resistance of drug are serious problem to retreatment cases, specially. Ofloxasine(OFX), developed from Quinolone at 1980's is effective not only other respiratory infectious disease but also pulmonary tube rculosis. And this is useful drug instead of injection agents for retreatment patients who have side effects to other drugs, lived far distance from medical clinics. So, we will evaluate theffectiveness as four oral drugs involving OFX. Method : A retrospective study was made through the regular follow up of smear positive cases,who treated by four drug, namely, prothionamide (PTA) cycloserine(CS), OFX, paraminosalicylic acid(pAS). Results: 1) Out of 66case with positive sputum AFB smear, 42(64%)cases achieved the negative conversion. 2) Considering the negative conversion in all group, 34 case (52%) of sputum conversion occured within first 6 months, on the extent of diease was minimal, moderate, far advanced pulmonary tuberculosis, sputum AFB smear negative response to treatment was 100%, 78%, 46% respectively. 3) The roentgenological improvement occured in 38(58%), extent of diease was minimal, moderately, far advanced pulmonary tuberculosis, Roentgenological improvement to retreatment was 75%, 64%, 46%. 4) When the drnation of patients illness was less than 1 year, 1 to 3 years, 3 10 5 years and more than 5 years, sputum AFB smear negative response to retreatment was 100%, 88%, 80%, 52 %. 5) On side effects, major problems are gastrointestinal troubles, mild liver function abnormality, psychotic problemes, and skin problem(urticaria, itching sensation). Conclusion : The duration & extents of patients illness was shorter & minimal, sputum AFB smear negative response rate was better. Radiologic response is better as shorter duration and minimal extent of diease. But, as diease is longer duration & far advanced, sputum negative conversion & Roentgenological improvement is poor and limited. The adverse reaction was mainly observed gastrointestinal troubles(indigestion, abdominal pain, nausea, vomiting, diarrhea) and are well controled by symptomatic management in most patients, as regard to tolerance to the secondary drugs.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.208-215
• /
• 2000

In order to improve 'Salso' method (conventional tapping method) which was very inefficient in the aspects of collection time and labor, this study was carried out to investigate the effect of the application date and the distance from treatment point in the lactree(Rhus verniciflua) treated with 10% CEPA and to decide the possibility of application of the technique in the field. Bark thickness was significantly increased to the part 40cm above and below the treatment point, but urushiol content was increased to the part 20cm above and 10cm below the zone treated with 10% CEPA. The urushiol content of the bark was highest at 5cm above the treated zone and decreased in the order of 10, 20, and 40cm. And the urushiol contents of the bark of the upper part were higher than that of the low part. The effects of CEPA on bark thickness were similar to urushiol contents. Urushiol production of lactree is highly dependent on climatic conditions and particularly on the precipitation, and duration of sunshine. Ten percent of CEPA-lanolin pastes which was treated on June 16 affected bark anatomy and urushiol contents, while the treatment on August 24 did not affect. In the Rhus verniciflua treated with 10% CEPA, the urushiol contents was initially increased from 7 days after treatment, continued for the 4 weeks, and then slight decrease occurred at 5 weeks after the treatment. We measured a total sap yield by Salso method in lactree treated with 10% CEPA. By applying 10% CEPA, the sap yield was increased 3-4 times compared to that of untreated trees in the first tapping. But the relative ratio was gradually decreased from the second tapping to sixth, and after seventh tapping, the untreated trees secreted more sap than the treated trees. We discussed about the causes.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.252-265
• /
• 2017

This study aims to analyze the landscape ecological characteristics of green spaces within built up area of high density and evaluate the potential applicability of green patches, thereby introducing urban garden for generating green networks in residence areas. To this end, Yeoksam-Dong was selected as the site area since it is classified as both green initiative zone and alienated area of park service in Seoul. First, the current condition of green spaces in Yeoksam-Dong was identified by five categories: Street trees, private garden, public pocket garden, rooftop garden, and park. Then, the landscape index analysis through FRAGSTATS and connectivity assessment via multi-buffer zone analysis were carried out for analyzing the green networks and evaluating the potential value of green space. The results showed that the degree to which green areas in the site were distributed is arranged in the order of street tree, private garden, public pocket garden, park, and rooftop garden. In case of the street trees whose total core area (TCA, $1,618m^2$) is as high as the park's ($1,128m^2$). Private garden has potential for green network in built up area of high density by gardening since the shape of the patches are irregular (ED = 78.1m/ha) and the average distance among the patches is close (ENN=33.9m). Public pocket garden has also potential for gardening according to the result that it was found to be distributed evenly (LPI=5.7%, SHEI=0.9) with exposing external disturbance ($TCA=66m^2$). For the green network, 84% of all the study site is covered by small green network in 50m butter range of connected green area. The effect of green network was expected through gardening in public pocket garden (27%) and street tree (26%). Accordingly, it is encouraged to actively utilize street tree, private gardens, and rooftop gardens and to establish the urban gardens like local-based community gardens in public pocket garden where a variety of activities can be carried out near residential areas. By doing so, green networks can effectively be established in built up area with high density. The results of this study can contribute positively to fostering the creation of various types of urban gardens.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.65-71
• /
• 1998

The aims are to evaluate the effects of an 1.0 cm acrylic plate and SSD on the dose profile and depth dose distribution of 9 MeV electron beam and to analyse adequacy for using an acrylic plate to reduce energy of electron beams. An acrylic plate of 1.0 cm thickness was used to reduce energy of 9 MeV electron beam to 7 MeV. The plate was put on an electron applicator at 65.4 cm distance from x-ray target. The size of the applicator was 10${\times}$l0cm at 100 cm SSD. For 100cm, l05cm and 110cm SSD, depth dose on beam axis and dose profiles at d$\_$max/ on two principal axes were measured using a 3D water phantom. From depth dose distributions, d$\_$max/, d$\_$85/, d$\_$50/ and R$\_$p/, surface dose, and mean energy and peak energy at surface were compared. From dose profiles flatness, penumbra width and actual field size were compared. For comparison, 9 MeV electron beams were measured. Surface dose of 7 MeV electron beams was changed from 85.5% to 82.2% increasing SSD from 100 cm to 110 cm, and except for dose buildup region, depth dose distributions were independent of SSD. Flatness of 7 MeV ranged from 4.7% to 10.4% increasing SSD, comparing 1.4% to 3.5% for 9 MeV. Penumbra width of 7 MeV ranged from 1.52 cm to 3.03 cm, comparing 1.14 cm to 1.63 cm for 9 MeV. Actual field size increased from 10.75 cm to 12.85 cm with SSD, comparing 10.32 cm to 11.46 cm for 9 MeV. Virtual SSD's of 7 and 9 MeV were respectively 49.8 cm and 88.5cm. In using energy reducer in electron therapy, depth dose distribution were independent of SSD except for buildup region as well as open field. In case of using energy reducer, increasing SSD made flatness to deteriorate more severely, penumbra width more wide, field size to increase more rapidly and virtual SSD more short comparing with original electron beam. In conclusion, it is desirable to use no energy reducer for electron beam, especially for long SSD.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.125-135
• /
• 2009

Statement of problem: Loosening or fracture of the abutment screw is one of the common problems related to the dental implant. Generally, in order to make the screw joint stable, the preload generated by tightening torque needs to be increased within the elastic limit of the screw. However, additional tensile forces can produce the plastic deformation of abutment screw when functional loads are superimposed on preload stresses, and they can elicit loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum tightening torque that maximizes a fatigue life and simultaneously offer a reasonable degree of protection against loosening. Purpose: The purpose of this study was to present the influence of tightening torque on the implant-abutment screw joint stability with the 3 dimensional finite element analysis. Material and methods: In this study, the finite element model of the implant system with external butt joint connection was designed and verified by comparison with additional theoretical and experimental results. Four different amount of tightening torques(10, 20, 30 and 40 Ncm) and the external loading(250 N, $30^{\circ}$) were applied to the model, and the equivalent stress distributions and the gap distances were calculated according to each tightening torque and the result was analyzed. Results: Within the limitation of this study, the following results were drawn; 1) There was the proportional relation between the tightening torque and the preload. 2) In case of applying only the tightening torque, the maximum stress was found at the screw neck. 3) The maximum stress was also shown at the screw neck under the external loading condition. However in case of applying 10 Ncm tightening torque, it was found at the undersurface of the screw head. 4) The joint opening was observed under the external loading in case of applying 10 Ncm and 20 Ncm of tightening torque. 5) When the tightening torque was applied at 40 Ncm, under the external loading the maximum stress exceeded the allowable stress value of the titanium alloy. Conclusion: Implant abutment screw must have a proper tightening torque that will be able to maintain joint stability of fixture and abutment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.197-207
• /
• 2011

The study aimed at examining how different reline resins affect flexural strength and flexural modulus of denture base. A total of 80 specimens ($64{\times}10{\times}3.3$ mm, according to ISO 1567:1999) of heat-polymerized resin, 40 specimens for (Lucitone199(Dentsply Int., NewYork, USA), SR Ivocap(Ivoclar AG, Schaan, Liechtenstein)) respectively, were polymerized according to the manufacturer's instructions and divided into eight groups(n = 10). Control group specimens remained intact. Specimens in the other groups were abraded on both sides to 2 mm thickness, and were relined in 1.3 mm thickness with 3 types of resins (Lucitone199(Dentsply), SR Ivocap(Ivoclar), and Rebase II(Tokuyama Co., Ltd, Tokyo, Japan)). All specimens were preserved in distilled water at $37^{\circ}C$ for 50 hours, and then were subjected to flexural strength testing in a universal testing machine using 3-point loading. A crosshead speed of 5 mm/min was used, and the distance between the supports was 50 mm. Data analyses included one-way analysis of variance(ANOVA) and the Tukey Honestly Significant Difference test (p=.05). Both heat-polymerized resin groups and auto-polymerized resin groups showed statistically low flexural strength and flexural modulus than control groups. Specimens relined with Lucitone 199 showed significantly higher flexural strength and flexural modulus than those relined with SR-Ivocap. Specimens relined with auto-polymerized resin showed significantly lower flexural strength and flexural modulus than those relined with heat-polymerized resin. Relining with heat-polymerized resins showed superior mechanical properties to relining with an auto-polymerized resin. Relining with the same heat-polymerized resin as the denture base does not affect mechanical properties of a denture. Lucitone199 using a compression-mould technique resulted in the highest flexural strength.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.266-271
• /
• 2009

We designed a thermo-optic switch based on a directional coupler with not only a high extinction ratio but also significantly low power consumption. The switch operates by using the thermo-optic effect of the polymer which the refractive index changes by heating the electrode. If the electrode is not powered (OFF), the input light will be coupled completely to the other waveguide. When the electrode is powered at a certain level (ON), input light launched into the input waveguide will remain in that waveguide due to the lower index adjusted in the other waveguide. The switch based on the directional coupler was designed using the generalized extinction ratio curve and the lateral shift of the input waveguide. The coupling length is 1,610 ${\mu}m$ and the extinction ratios are -28 and -30 dB for ON and OFF states, respectively. The electrode structures were optimized by thermal analysis. The transported heat into the waveguide is increased, as the electrode width (w) is increased and the center distance between the electrode and the waveguide (d) is decreased. Also, because the heat generated in the electrode affects the other waveguide, the temperature difference between two waveguides is varied as the given w and d. There are specific conditions which have the maximum of the temperature difference. That of the temperature difference is increased as the width and the temperature of the electrode are increased. Especially, when the switch is designed using the condition with the maximum of the temperature difference for switching, the temperature of the electrode can be decreased. We expect this condition will be the novel method for the reduction of the power consumption in a thermo-optic switch.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.91-118
• /
• 2009

In the Republic of Korea, Regional Airlines from Jeju Air and Hansung Airlines have recently entered the domestic market to compete with the existing Legacy Airlines. In addition many of newly established regional low cost carriers like Air Busan, JeanAir, Easter Airline, are preparing to enter the jungle market. These circumstantial changes have come about as transportation competitiveness are getting weak in the market due to simultaneous expansion of surface modes such as a new opening of high-speed rail and extension of highways. The jumbled market entry by regional low cost carriers makes an enormous influence not only in managing transport network of existing carriers but also for the domestic policy of aviation authorities. It is too early to judge whether they would succeed or not. It is necessary to analyze the network operation of these regional carriers launching domestic routes and preparing to launch short distance international routes under the rapid changing market circumstances such as introduction of KTX or decrease in domestic routes by Legacy Airlines. Many regional airlines are to launch the routes connecting Korea-China-Japan, if they could ensure long-haul international routes successfully, it would follow that the difference between Legacy Airlines and Regional Airlines would decrease more and more, which would result in appearance of the $3^{rd}$or $4^{th}$Legacy Airlines The purpose of this study is to analyze the introduction of low cost carriers by regions and economic regional carrier network for non-scheduled air transportation market by taking a look at the regional airlines transportation network in the early stage of the domestic air transport market. For this purpose, cost and profit structure and management effect of transportation cost will be analyzed by comparing the presently operated routes of regional airlines with those of Legacy Airlines. And also demonstrative analysis demanded by the actual market will be achieved through surveys from experts, the actual airlines and travel agencies to build up transportation network.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.60-76
• /
• 2020

The purpose of this study was to examine the spatial and visual arrangement characteristics of Imsil Yi Ung-jae's old house's spatial and visual aspects in order to discover the value of landscape and traditional house garden. The results of this study are as follows. Dongchon-village in Dundeok-ri, where old house is located, is a typical form of with "Back to the mountain and facing the water(背山臨水)", and is located in the north of the three streams of water, forming a Jeonchaghugwan(前窄後寬). Dongchon Village, which has a traditional scenic spot between Danguidae(丹丘臺) and Samgyeseokmun(三溪石門), is understood to be the main street of Nojeokbong Peak and Gyegwanbong Peak, which is Ansan(案山), where the "A centipede flying in the sky(飛天蜈蚣形)". Yi Ung-jae's old house is the oldest existing high-priced house in the North Jeolla region and the closing price of a royal family of the Joseon Dynasty, which was arranged by Chunseongjeong(春城正), Yi Dam-son(李聃孫) in the mid-16C. The Japanese Invasion of Korea in 1592 and Japanese colonial era, the loyalty of the gate quarters, the filial piety of the gate quarters, and the faithfulness of the tablet(扁額) and Juryeons(柱聯) are enough to contribute to the rise of the value of a physical house. The men's quarters(Sarangchae), which are placed on a high-pocket or a layout without going against the sloping terrain, have the effect of making the distance as far as possible, enhancing its dignity and hierarchy as a royal building. In addition, the entrance to the main quarters(Anchae) through the four pillar gates(四柱門), the extensive support and the appropriation of the Chaewon(vegetable garden), and the official base for the Anchae are very unique compared to the general nobility. However, in the context of the postwar relationship, the shrine seeks to realize Confucian ideals while harmonizing with nature by arranging wide sponsorships around it. On the other hand, it is confirmed that there was a pond in the form of a circle in a square(方池圓島型) with a relatively large area, which is now disturbed and damaged. Written by the high priced planting species are sponsored pine trees, hackberry, persimmon trees, Japanese apricot flower, Ohmomiji, and plum tree in the side garden, as well as cotyledon trees in the outside garden. However, although flower bed(花階), which is built on the stone axis, is a place that clearly shows the expensive garden, it seems to have lost the texture of the plant due to the extremely high variety of species and the splendor that does not match the plant landscape of the flower world. Yi Ung-jae's old house is highly valuable as it is a portrait house of a prince of the blood in the mid-Joseon Dynasty. Based on these findings, this study proposed a plan to improve the management of high prices that could be met.