• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.47-67
• /
• 1996

The purpose of this study was to observe the effect of $Biocoral^R$ graft and bioglass 45S5 graft in combination with ePTFE membrane in periodontal osseous defects for new bone formation. Nine healthy dogs were used. Under general anesthesia, 3-wall defects were created on the mesial and distal surfaces of the maxillary right canines, the mesials of the maxillary right second premolars, the distals of the mandibular right canines and the mesials of the mandibular right third premolars. To induce periodontitis, a silicone rubber, $Provil^R$ light body, was injected under pressure into the defects. Ninety days later, $Provil^R$was removed and followed by thorough root planing. The followings were then applied in the mesial and distal defects of the maxillary right canines, the mesials of the maxillary right second premolars, the distals of the mandibular right canines and the mesials of the mandibular right third premolars by random selections : 1) ePTFE membrane only application, 2) $Biocoral^R$ graft, 3) $Biocoral^R$ graft and ePTFE membrane application, 4)Bioglass 45S5 graft, 5) Bioglass 45S5 graft and ePTFE membrane application. The membranes were removed 1 month later. The dogs were sacrified at 1, 2 and 3 months following the graft, and block sections were made, demineralized, embedded, stained and examined by light microscope and transmission electron microscope. On the sections from teeth treated with ePTFE membrane only, the defect demonstrated extensive connnective tissue and alveolar bone regeneration. The $Biocoral^R$ graft group demonstrated extensive bone regeneration compared with ePTFE membrane only group. In the $Biocoral^R$ graft plus ePTFE membrane group, regeneration of new alveolus and crest occurred within the defect. As the experimental period lengthened, bone regeneration was increased and bone bridge was formed among the graft particles. The but bioglass 45S5 graft group demonstrated extensive bone regeneration but the amount of new bone was less than that of the $Biocoral^R$ graft group. For the bioglass 45S5 graft plus ePTFE membrane group, the amount of new bone was also increased. As the experimental period lengthened, bone regeneration was increased. Multinucleated giant cells, fibroblasts and macrophages were observed. As the bone formation was increased, the number of such cells was decreased. In conclusion, the $Biocoral^R$ was found better than the bioglass 45S5 for new bone formation, and the use of ePTFE membrane alone or with $Biocoral^R$/bioglass 45S5 can be supported as potential methods of promoting bone formation.

• 대한치과기공학회지
• /
• 제28권2호
• /
• pp.331-346
• /
• 2006

Free-end partial dentures, which are supported by teeth surrounded by dental root membranes and elastic mucous membrane tissues, may cause stress to the abutment teeth due to external force imposed on the denture base, increase the mobility of the abutment teeth, and bring about a change in the periodontal tissue. General retainers used in partial dentures are categorized into clasp, attachment, and Konus crown. Stress imposed on the abutment teeth and mobility of the denture base have relations with the lifetime of a crown and abutment teeth, and have direct relations with the chewing ability. Thus, a need arises to make a comparative analysis of stress of the three direct retainers on the abutment teeth and interpret the mobility of the denture base. This study designed three kinds of removable partial dentures (one kind of attachment partial denture, one kind of Konus crown partial denture, and one kind of clasp partial denture), and fabricated Dentiforms of bilateral partial dentures (Kennedy Class I) with lower left 1st premolar and lower right 1st and 2nd premolars being as the abutment teeth. A strain gauge was installed in the mesial and distal surface of the lowerr left 1st premolar (No. 34) of the fabricated dentiform and in the lower part of the denture base, and installed were a clasp partial denture, an attachment partial denture, and a Konus crown partial denture. Then, the vertical static load of 5kgf and 7.5kgf at the occlusion surface of the lower left No. 6 molar was generated for a total of 20 frequencies of load each using a push-full gauge, and thus a change in the output of the strain gauge was measured. With the respective application of Konus crown, attachment and RPI clasp in the free-end partial denture, surveyed was the distribution of stress imposed on the abutment teeth and the denture base according to the location of occlusion force load so as to come up with the following results. 1. Konus crown and attachment partial dentures generated much stress, and more stress on the abutment teeth than RPI clasp dentures did. Attachment dentures tended to further intensify stress on the abutment teeth than Konus crown dentures did. 2. Attachment dentures and Konus dentures imposed less stress on the denture base than RPI clasp dentures did. There was no stress difference between Attachment and Konus crown dentures. 3. Dentures that were designed with the application of retainers using sturdy linkage methods tended to be less mobile.

• 대한치과교정학회지
• /
• 제31권2호통권85호
• /
• pp.199-207
• /
• 2001

본 연구는 교정치료를 시행함에 있어 전치부 crowding을 해결하기 위한 견치의 단독견인 방법중 새로운 segmented TMA T-loop spring으로 견치 후방견인시 치근단과 그 주위 치조골에서의 응력상태를 알아보기 위해 시행되었다. PL-3 epoxy resin으로 광탄성 모형을 제작하여 B/L ratio가 0.25, 0.5, 0.75인 위치로 T-loop을 위치시키고 각 위치에서 5mm, 3mm, 1mm activation하였다. 이후 광탄성 응력 해석장치를 이용하여 견치견인시 치근단과 그 주위 치조골에서의 초기 응력 상태를 광탄성법으로 분석한 바, 다음과 같은 결론을 얻었다. 1. T-looP 위치에 상관없이 activation량이 감소할수록 상악 1소구치 발치부위에 응력이 감소하였고 상악 1대구치의 함입응력은 증가하였다. 2. 5mm activation시 T-loop위치가 구치부쪽으로 이동할수록 상악 1소구치 발치부위에 응력이 증가하였다. 3. 3mm activation시 T-loop위치가 구치부쪽으로 이동할수록 상악 1소구치 발치부위와 상악 1대구치 협측 근심치근 근심면하방 1/2부위에 응력이 증가하였다. 4. 1mm activation시 T-loop위치가 견치쪽으로 이동할수록 상악 견치의 근심치근면 상방과 치근첨 하방의 응력이 증가하였다. 5. B/L ratio가 0.25이고 3mm activation시 상악견치의 치체이동이 나타났다. 이상의 결과를 종합해볼 때 segmented T-loop spring의 근, 원심 위치 와 activation량을 조절하여 원하는 치아이동과 고정원 조절이 가능하다고 사료된다.

• 대한치과교정학회지
• /
• 제27권5호
• /
• pp.711-721
• /
• 1997

본 연구는 TMA wire로 제작된 transpalatal lingual arch에 의한 골내 응력 분포를 파악하기 위하여 양측성 및 편측성 확장을 가하여 이때 발생하는 치아주위조직 응력 분포 양상을 광탄성 응력 해석법으로 관찰하여 다음과 같은 결과를 얻었다. 1. 양측성 확장시 수평 변형만 적용했을 때 탄선끝이 각진 경우 둥근 탄선끝을 적용한 경우보다 응력이 치근단으로 집중되며 회전 중심을 의미하는 흑색선이 변화하는 양태를 보였고 수직변형량이 증가되면서 전체적인 응력차수의 증가와 흑색선의 하방 이동 양상을 보였다. 2. 편측성 확장을 위해 수평 변형과 함께 확장측에만 수직 변형을 적용하였을 때 확장력이 확장측으로 편중되는 응력 분포를 관찰할수 있었다. 수직 변형량의 증가시 확장측 구치는 정출하는 응력을 보였고 수평변형량의 증가시 고정측 치아도 경사지려는 응력 분포가 관찰되었다. 3. 편측 구치의 회전을 개선하기 위해 철사끝을 비대칭적으로 toe-in한 경우 변형량이 적은 구치의 치근단 원심측에 응력 분포를 관찰할수 있었다. 4. 악궁 확장시 철사의 길이를 줄일수록 무늬차수가 증가하는 응력 분포를 보였다.

• Journal of Oral Medicine and Pain
• /
• 제25권4호
• /
• pp.415-425
• /
• 2000

In order to obtain the basic data concerning the optimal lasing conditions in using Nd:YAG laser as an adjunctive modality of periodontal therapy of root planing without irreversible structural deterioration of cervical cementum, the author selected 36 human teeth having no cervical abrasion and caries (; 12 anteriors, 12 premolars. 12 molars) extracted due to periodontal diseases, and divided them into 4 groups as Group I, II, III and IV (; each group of 3 anteriors, 3 premolars, 3 molars), and prepared a cementum specimen with thickness of $1.0mm{\pm}0.2mm$ sectioned longitudinally at the middle of mesio-distal thickness (; Group I) or horizontally at 1mm-2mm below the cemento-enamel junction (; Group II, III, IV) from each tooth of each group by low speed diamond wheel saw, and treated them with 0.5 M ethylene diamine tetraacetic acid (; EDTA, pH=7.4) for 2 minutes for elimination of remnants during tooth-sectioning. And the author applied the laser energy from a fiberoptic delivered, free running, pulsed Nd:YAG laser (; wavelength 1064nm. pulse duration $120{\mu}sec$, fiber diameter $320{{\mu}m}$) to cementum surfaces in triplicates of one experiment under the following lasing conditions: 1. stationary mode of fiber in contact to cementum surfaces without air-spray (; Group I )/with air-spray (; Group II), 2. unidirectional moving mode of fiber in contact to cementum surfaces under speed of 3mm-4mm/sec without air-spray (; Group III)/with air-spray (; Group IV), 3. energy per pulse (mJ/pulse) [; energy density ($J/cm^{2}$)] in order of 1.0W/10Hz (100J/pulse); $124J/cm^{2}$, 0.5W/10Hz (50mJ/pulse); $62J/cm^{2}$, 0.4W/10Hz (40mJ/pulse); $50J/cm^{2}$, 0.3W/10Hz (30mJ/pulse); $37J/cm^{2}$, 4. exposure time of 1 second. And the author applied the platinum coating on surfaces of cementum specimens, and evaluated the characteristics of ultrastructural change on surfaces of cementum using the scanning electron microscopy. In general the ultrastructural loss of cervical cementum irradiated under the same lasing condition of laser energy density occurred least in specimens of Group IV. And especially, the ultrastructural loss of cervical cementum irradiated under the laser energy density of $37J/cm^{2}$ almost did not occur in specimens of Group IV. Therefore, it is considered that the pulsed Nd:YAG laser should be applied with the lasing conditions of unidirectional moving mode of fiber in contact to cementum surfaces under speed of 3mm-4mm/sec with air-spray and of laser energy density within $37J/cm^{2}$ as an adjunctive modality of periodontal therapy of root planing without irreversible structural deterioration of cervical cementum.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.197-212
• /
• 1998

The purpose of this study was to evaluate the effects of fluoride application on the aspect of shear bond strength of three aesthetic restorative materials to dentin. One light-cured composite resin(Palfique Esterite) and two light-cured glass ionomer cements(Fuji II LC and Compoglass)were used in this study. 120 permanent molars were used for this study. The teeth were extracted due to the origin of periodontal disease. The crowns of all teeth were removed, and the remaining roots were embedded in epoxy resin. The mesial or distal surfaces of roots were ground flat to expose dentin and polished on wet 320-, 400-, and 600 grit SIC papers for a total of 120 prepared flat root dentin surfaces. The prepared samples were divided into six groups. Group 1, 3, and 5 were control groups and group 2, 4, and 6 were experimental groups. Sixty samples for experimental groups were treated with 2% NaF solution for 5 minutes. Group 1 and 2 were bonded with Plafique Esterite, group 3 and 4 were bonded with Fuji II LC, and group 5 and 6 were bonded with Compoglass. After 24 hours water storage at $37{\pm}1^{\circ}C$, all samples were subjected to a shear to fracture with Instron universal testing machine(No.4467) at 1.0 mm/min displacement rate. Dentin surfaces treated with each conditioners before bonding and interfacial layers between dentin and aesthetic restorative materials were observed under Scanning Electron Microscope(Hitachi S-2300) at 20Kvp. The data were evaluated statistically at the 95% confidence level with ANOVA test. The result were as follows; 1. Among the control groups, group 1 showed strongest bond strength and group 3 showed weakest. 2. Among the experimental groups, group 2 showed strongest bond strength and group 6 showed weakest. 3. Statistical analysis of the data showed that pretreatment of dentin with 2% NaF solution significantly decreased the bond strength of three aesthetic restorative materials to dentin(P<0.05). 4. SEM findings of fluoride treated dentin surfaces (2, 4, 6 group) demonstrated dentin surfaces covered with fluoridated reaction products. 5. Except group 4 and 6, resin tags were formed in all groups.

• 대한소아치과학회지
• /
• 제49권1호
• /
• pp.25-34
• /
• 2022

이 연구의 목적은 상악 측절치 과잉치의 해부학적인 특징과 정상 측절치와의 관계에 대해 정량적 분석을 시행하는 것에 있다. 43명의 44개의 상악 측절치 과잉치를 대상으로 전산화 단층 방사선사진을 이용하여 측절치 과잉치의 위치, 형태, 방향 및 측절치 과잉치와 인접한 영구전치와의 관계를 관찰하였다. 또한 측절치 과잉치와 인접한 측절치 및 반대측 측절치의 크기를 비교하기 위해 각각의 치관 근원심 폭경을 계측하였고, 치아성숙도를 비교하기 위해 Nolla stage를 이용하여 각 치아의 치근 발육 정도를 평가하였다. 측절치 과잉치는 90.9%의 비율로 정위 방향으로 존재하였고, 84.1%가 보충형의 형태로 존재하였다. 측절치 과잉치는 인접한 측절치나 반대측의 측절치에 비해 치관의 크기가 통계적으로 유의하게 작았고(p < .0001), 치근 발육 단계에서는 통계적 유의미한 차이를 보이지 않았다. 결론적으로, 상악 측절치 과잉치는 정상측절치와 매우 유사하지만 치관 크기에 있어서 차이를 보인다. 상악 측절치 과잉치가 존재하는 경우, 교정적 혹은 심미적인 문제를 줄이기 위해 측절치와 과잉치를 정확하게 구분하여 치료하는 것이 중요하다.

• 치과방사선
• /
• 제22권2호
• /
• pp.273-282
• /
• 1992

The purpose of this study was to propose the utility which was evaluated the digital image processing and clinical application of the videodensitomery. The experiments were performed with IBM-PC/16bit-AT compatible, video camera(CCdtr55, Sony Co., Japan), an color monitor(MultiSync 3D, NEC, Japan) providing the resolution of 512×480 and 64 levels of gray. Sylvia Image Capture Board for the ADC(analog to digital converter) was used, composed of digitized image from digital signal and the radiographic density was measured by 256 level of gray. The periapical radiograph(Ektaspeed EP-21, Kodak Co., U. S. A) which was radiographed dried human mandible by exposure condition of 70 kVp and 48 impulses, was used for primary X-ray detector. And them evaluated for digitzed image by low and high pass filtering, correlations between aluminum equivalent values and the thickness of aluminum step wedge, aluminum equivalent values of sound enamel, dentin, and alveolar bone, the range of diffuse density for gray level ranging from 0 to 255. The obtained results were as follows: 1. The edge between aluminum steps of digitized image were somewhat blurred by low pass filtering, but edge enhancement could be resulted by high pass filtering. Expecially, edge enhancement between distal root of lower left 2nd molar and alveolar lamina dura was observed. 2. The correlation between aluminum equivalent values and the thickness of aluminum step wedge was intimated, yielding the coefficient of correlation r=0.9997(p<0.00l), the regression line was described by Y=0.9699X+0.456, and coefficient of variation amounting to 1.5%. 3. The aluminum equivalent values of sound enamel, dentin, and alvolar bone were 15.41㎜, 12.48㎜, 10.35㎜, respectively. 4. The range of diffuse density for gray level ranging from 0 to 255 was wider enough than that of photodenstiometer to be within the range of 1-4.9.

• 한국산림과학회지
• /
• 제64권1호
• /
• pp.20-25
• /
• 1984

북미(北美) 사시나무 trembling aspen의 근단조직내(根端組織內)의 동위효소(同位酵素)의 유전양상(遺傳樣相)을 구명하기 위하여 모수(母樹) 1개체에 화분수(花盆樹) 4개체를 교배하여 얻은 4개의 전형매가계(全兄妹家系)의 종자를 온실내(內)에서 파종, 7주후(週後) 가계당(家系當) 70개체의 유묘(幼苗)와 모수(母樹)와 화분수(花盆樹)의 맹아(萌芽)의 생장이 왕성한 뿌리의 근단부(根端部) 2cm를 채취하여 수평식 전분젤 전기영동법으로 분석하였다. 7개의 동위효소(同位酵素)에 대하여 모두 11개의 밴드지역이 관찰되었으며, 각 지역에 대한 부모의 동위효소표현형(同位酵素表現型)과 그 차대(次代)의 동위효소표현형(同位酵素表現型)을 관찰 $x^2$-test로 그 분리비(分離比)를 검정한 결과 모든 동위효소(同位酵素) 밴드지역은 각각 하나의 유전자좌(遺傳子座)에 의하여 지배되고 있는 것으로 나타났다. 한편 6-PGD-2와 PGI-2와의 복합(複合) 분리비(分離比)를 $x^2$-test로 검정한 결과 6-PGD-2와 PGI-2간(間)에는 연관관계(連關關係)가 없는 것으로 추성되었다.

• 치위생과학회지
• /
• 제7권4호
• /
• pp.207-211
• /
• 2007

많은 연구에서 대구치의 백악법랑 경계부에 나타나는 법랑돌기의 발현이 치주질환과 밀접한 연관성을 보인다고 하였다. 이 연구는 서울대학교 치과병원에 내원한 환자에서 발거된 치아 660개 중 법랑돌기의 관찰이 가능하고, 제 1, 2대구치의 구별이 가능한 530개의 치아를 대상으로 치면별, 치아별 법랑돌기의 발현빈도를 알아보고자 시행하였다. 법랑돌기의 관찰이 용이하도록 깨끗이 세정한 후, 8배 전자확대경을 이용하여 상, 하악 제 1, 2대구치의 협면, 근심면, 원심면, 설면(구개면)에 나타나는 법랑돌기를 조사하였다. 법랑돌기의 발현빈도는 상악에서 45.49%, 하악에서 39.62%로, 하악에서보다 상악에서 높았으며, 제1대구치는 45.22%, 제2대구치는 39.89%로, 제2대구치보다 제1대구치에서 더 높게 나타났다. 또한 치면별 발현빈도는 전체 대상치아의 협면에서 가장 높게 나타났으며, 상악 제1대구치 협면에서 78.27%, 상악 제2대구치 협면에서 81.23%, 하악 제1대구치 협면에서 76.86%, 하악 제2대구치 협면에서 70.3%의 발현율을 보였다. 이 연구의 결과는 이전의 보고에 비해 높은 법랑돌기의 발현빈도를 보여주고 있으며, 이는 8배 전자확대경을 이용한 관찰에 의한 결과로 생각된다.