• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.55-64
• /
• 1995

A study was made to examine the effects of postweld heat treatment(PWHT) on the toughness and microstructures in the weld heat affected zone(HAZ) of Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulate the weld HAZ. The details between toughness and PWHT of HAZ were studied by impact test, optical microscopy(O.M.), scanning electron microscopy (SEM), transmission electron microscopy(TEM) and differential scanning calorimetry(DSC). The decrease of HAZ toughness in single thermal cycle comparing to base plate is ascribed to the coarsed-grain formed by heating to 1350.deg.C. The increase of HAZ toughness in double thermal cycle comparine to single thermal cycle is due to the fine ferrite(.alpha.) grain transformed from austenite(.gamma.)formed by heating to .alpha./.gamma. two phase region. Cu precipitated during aging for increasing the strength of base metal is dissolved during single thermal cycle to 1350.deg.C and is precipitated little on cooling and heating during subsequent weld thermal cycle. It precipitates by introducing PWHT. Thus, the decrease of toughness in triple thermal cycle of $T_{p1}$ = 1350.deg.C, $T_{p2}$ = 800.deg.C and $T_{p3}$ = 500.deg.C does not occur owing to the precipitation of Cu. The behaviors of Cu=precipitates in HAZ is similar to that in base plate. PWHT at 550.deg.C shows highest hardness and lowest toughness, whereas PWHT at 650.deg.C shows reasonable toughness, which improves the toughness of as-welded state.state.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.523-528
• /
• 2007

본 연구에서는 막분리 공정의 전처리 공정으로 응집 공정을 적용할 경우 응집 공정의 적용 가능성을 평가하고자 하였으며 사용된 응집제 종류에 따라 발생하는 금속염이 막오염에 미치는 영향을 파악하고자 하였다. 응집제 종류에 따른 투과 flux 실험결과 응집 공정을 전처리 공정으로 적용할 경우 막의 재질에 상관없이 응집효율이 우수한 PACl의 경우 투과 flux가 높게 나타났으며 전처리 응집 공정의 적용시 급속교반+UF 공정에 비하여 급속-완속교반+UF 공정의 경우 투과 flux 감소율이 낮게 나타났다. 급속교반 공정에 응집제를 첨가할 경우 다양한 형태의 가수분해종이 형성되어졌으며 금속염 응집제가 막오염에 미치는 영향을 살펴보기 위하여 시간에 따른 투과 flux 실험결과 금속염 응집제에 의한 막오염이 발생하였으며 응집제 주입량이 증가할수록 침전물 형태의 금속염 가수분해종의 발생이 증가하여 투과 flux 감소가 크게 나타났다.

• 상하수도학회지
• /
• 제32권1호
• /
• pp.55-65
• /
• 2018

It is necessary to develop a mobile water production system in order to provide stable water supply in case of disasters such as floods or earthquakes. In this study, we developed a modular mobile water production system capable of producing water for various uses such as domestic water and drinking water while improving applicability in various raw water sources. The water production system consists of three stages of filtration (sand filtration - activated carbon filtration - pressure filtration) to produce domestic water and an additional reverse osmosis process to produce drinking water. In laboratory and field experiments, the domestic water production system showed excellent treatment efficiency for particulate matter, but showed limitations in the treatment of dissolved substances such as dissolved organic matter. In addition, ultraviolet irradiation was considered as additional disinfection step, because it does not form precipitates of manganese oxides after disinfection. Reverse osmosis process was added to increase the removal efficiency of dissolved substances and the treated water satisfied drinking water quality standards. Fluorescence analysis of dissolved organic matter showed that the fulvic acid-like substances in raw water was successfully removed in the reverse osmosis process. The mobile water production system developed in this study is expected to be used not only in water supply in case of disaster, but also widely used in islands and rural area.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.725-731
• /
• 2010

This study was to evaluate the ozone oxidation of dissolved Fe, Mn, $SO{_4}^{2-}$ ions and color in abandoned mining drainage by conducting a bench-scale operation at various reaction times in an ozone reactor. The influent was collected from an abandoned mine drainage (AMD) near the J Mine in Jungsungun, Kangwon Province. The ozone reactor was operated at ozone reaction times of 10, 20 and 30 min with ozone doses of 0.0 and $2.4g\;O_3/hr$. Samples from each effluent from subsequent sand filtration were regularly collected and analyzed for pH, Fe, Mn, Al, Cr, Hg, $SO{_4}^{2-}$, alkalinity, color, ORP, TDS and EC. The effluent concentrations of Fe and Mn from the sand filter were less than 0.1 mg/L, which were below the concentrations on Korean drinking water quality standards (Fe, Mn < 0.30 mg/L). The influent $SO{_4}^{2-}$, concentrations were not noticeably changed during this ozone oxidation. Cr and Hg in the raw wastewater from the abandoned mining drainage were not detected in this study. The experimental result shows that the ozone oxidation of dissolved heavy metals and subsequent sand filtration of metal precipitates are desirable alternative for removing heavy metals in AMD.

• 열처리공학회지
• /
• 제4권4호
• /
• pp.24-33
• /
• 1991

The effects of thermomechanical treatments on microstructure and fatigue properties of 7050 Al alloy were investigated. The precipitation kinetics changed to a faster rate due to cold deformation employed in this special TAHA thermomechanical treatments including pre-aging, plastic deformation and two step final-aging. The G.P. zones in the under-aged condition were cut by dislocations and dissolved during the plastic deformation. During the low cycle fatigue, the T6' condition showed cyclic hardening behavior whereas the TMT5, TMT27 and T76 conditions showed cyclic softening at above 0.7% total strain amplitudes. The ${\Delta}K_{th}$ value of TMT27 was improved more than two times, compared with that of T76 condition. The T6' with small shearable precipitates resulted in the markedly high ${\Delta}K_{th}$ value. This is thought to be resulted from dislocation reversibility and roughness-induced crack closure due to planarity of slip.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.49-54
• /
• 1997

On the precipitatiopn and ripening reaction of the precipitates from a lead nitrate and an oxalic acid dissolved in ethanol, a new crystalline phase was obtained, whose X-ray diffraction data have not previously been reported. The crystal system was determined to be monoclinic. The unit-cell parameters were refined to a =10.613(2)$\AA$, b =7.947(2))$\AA$, c =6.189(1)$\AA$, and $\beta$=104.48(2)$^{\circ}$.

• 열처리공학회지
• /
• 제24권3호
• /
• pp.144-148
• /
• 2011

Change in damping capacity with strain amplitude was studied in Mg-Al-Si alloy in as-cast, solution-treated and aged states, respectively. The as-cast microstructure of the alloy is characterized by eutectic ${\beta}$($Mg_{17}Al_{12}$) phase and Chinese script type $Mg_2Si$ particles. The solution treatment dissolved the ${\beta}$ phase into the matrix, while the aging treatment resulted in the distribution of continuous and discontinuous type ${\beta}$ precipitates. The solution-treated microstructure showed better damping capacity than as-cast and aged microstructures both in strain-dependent and strain-independent damping regions. The decrease in second-phase particles which weakens the strong pinning points on dislocations and distribution of solute atoms in the matrix, would be responsible for the enhanced damping capacity after solution treatment.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.311-312
• /
• 2005

The precipitation of U(VI) in the presence of phosphate and carbonate was investigated in the pH range of 4 to 13 and the following was obtained as a result of this experimental condition. U(VI) precipitates as a $NaUO_{2}PO_{4}$ at pH<9 but as mixtures of phosphate, hydroxides and/or carbonate at pH>9. The portion of the phosphate in the precipitate decreases almost linearly to near zero with an increasing pH in the range of 9 to 13. The U(VI) phosphate is dissolved by the carbonate complex formation at pH<10.5. The ternary complex of a carbonate and phosphate is not found.

• 대한화학회지
• /
• 제5권1호
• /
• pp.76-79
• /
• 1961

The nickel has been separated and precipitated with dimethylglyoxime in the usual manner and dissolved the precipitates with hydrochloric acid. To the nickel solution, 0.2g of Murexide as an indicator and 5 ml of 20 percent tri-ethanol amine solution were added and titrated with a standard solution of EDTA. At the end point the color changes from yellow to deep purple. In this paper, the purpose is that conditions for titration and for separation from the interfering substances were investigated and a suitable procedure was found and applied on the determination of nickel in Korean nickel ores.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.