• Journal of Biomedical Engineering Research
• /
• v.10 no.1
• /
• pp.59-66
• /
• 1989

The Applicability of chitin or chitosan microsphere as means to achieve sustained release of p-aminosalicylic acid(PAS) has been examined. The microsphere of chitin or chitosan containing PAS were prepared by coacervation in acidic aqueous system in range of pH 2.0-4.0. The dissolution test of PAS from polymeric drug system was carried out in vitro test. The dissolution rate of PAS from the microsphere with chitin was significanthly lower than that from the microsphere with chitosan.The dissolution rate of PAS from the microsphere was decreased with increasing of concentration of chitin and chitosan. The sustained release of PAS from the microsphere was more effective at pH 1.2 than pH 6.8.

• Korean Journal of Clinical Pharmacy
• /
• v.6 no.2
• /
• pp.14-18
• /
• 1996

This study was attempted to investigate the dissolution rate and the bioavailability after oral administration of commercially available norfloxacin tablets in rabbits. The dissolution test was conducted in artificial gastric juice using basket method with for norfloxacin preparations (A, B, C and D) which were chemically equivalent. The results were as follows ; The dissolution rate was increased in the order of four different brand A>D>B>C. Area under the plasma concentration curve and peak plasma concentration were increased in the order of brand A>D>B>C. Absorption rate constant and peak time were increased in the order of brand B>A>C>D, and there was a little difference in elimination rate constant and biological half-life. The correlation of the dissolution rate and relative bioavailability showed significant linear relationship. From the results of this experiment, the bioavailability of norfloxacin tablets in rabbits may be predicted from the results of dissolution rate studies.

• Journal of Pharmaceutical Investigation
• /
• v.13 no.3
• /
• pp.104-109
• /
• 1983

The effect of diluents on the dissolution rate of indomethacin was studied and the dissolution rate for the marketed products was compared to establish the quality standard for indomethacin preparation. The results are as fellows 1. The effect of test methods was not significant in the case of paddle method but was greatly effected in the case of basket method. 2. The effect of diluents was not significant generally, but in the case of starch dissolution rate was greatly effected. 3. The dissolution rate was remarkably decreased in proprotion to increase of capsule size. 4. The marketed products met the KP dissolution requirement but showed a little difference due to manufacturers.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.81-85
• /
• 1998

Three polymorphic modifications and two pseudopolymorphic modifications of cefotaxime sodium were obtained by crystallization from different organic solvents. The isolated crystal forms were characterized by UV spectrophotometry, DSC, TGA and X-ray crystallography. Crystal forms of cefotaxime sodium were also compared by dissolution rate. The dissolution rate of form 1 was the highest, followed by form 2, form 4, form 6, form 5 and form 3. Among these polymorphic modifications the dissolution rate of form 3 and form 5 was much slower than that of cefotaxime sodium on the market. All forms showed no change after 2-month storage test in the silica gel desiccator. But after the storage of 2-month at 95% relative humidity condition, all forms were deliquesced by hygroscopic property except form 1 that showed the highest dissolution rate. At 52% relative humidity condition, form 1, form 2 and form 6 had no evidence of phase transformation, but form 3, form 4 and form 5 were also deliquesced.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.339-345
• /
• 2010

Fenofibrate has been used for many years to lower cholesterol levels and its pharmacokinetic profile is well understood. However, due to its low solubility in water, it has low bioavailability after oral administration. In order to improve the dissolution rate, fenofibrate was formulated into a self-microemulsifying drug delivery systems (SMEDDS). We used pseudo-ternary phase diagrams to evaluate the area of microemulsification, and an in vitro dissolution test was used to investigate the dissolution rate of fenofibrate. The optimized formulation for in vitro dissolution assessment consisted of Lauroglycol FCC (60%), Solutol HS 15 (27%), and Transcutol-P (13%). The mean droplet size of the oil phase in the microemulsion formed from the SMEDDS was about 130 nm. The dissolution rate of fenofibrate from SMEDDS was significantly higher than that of the reference tablet. Our studies suggested that the fenofibrate containing SMEDDS composition can effectively increase the solubility and oral bioavailability of poorly water-soluble drugs.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.227-234
• /
• 1999

Solid dispersions were prepared to increase the dissolution rate of biphenyl dimethyl dicarboxylate (DDB) using water-soluble carriers such as povidone, copolyvidone, $2-hydroxypropyl-{\beta}-cyclodextrin (HPCD)$, sodium salicylate or sodium benzoate by solvent evaporation method. Solid dispersions were characterized by infrared spectrometry, differential scanning calorimetry (DSC) and powder X-ray diffractometry, dissolution and permeation studies. DDB tablets (7.5 mg) were prepared by compressing the powder mixtures composed of solid dispersions, lactose, com starch, crospovidone and magnesium stearate using a single-punch press. DDB capsules (7.5 mg) were also prepared by filling the mixtures in empty hard gelatin capsules (size No.1). From the DSC and powder x-ray diffractometric studies, it was found that DDB was amorphous in the HPCD or copolyvidone solid dispersions. Dissolution rates after 10 min of DDB alone and solid dispersions (1 : 10) in sodium benzoate, sodium salicylate and copolyvidone were 11.8, 23.5, 22.8 and 82.5%, respectively. Dissolution rates of DDB after 30 min from 1 : 10 and 1 : 20 copolyvidone solid dispersions were 80.5 and 95.0%, respectively. For the DDB tablets prepared using solid dispersions (1 : 20), the initial dissolution rate was dependent on carrier material, and was ranked in order, $Kollidon\;30\;{\ll}$ copolyvidone < HPCD. For the HPCD solid dispersion tablets, dissolution rate reached 97.4% after 15 min, but thereafter slowly decreased to 80.7% after 2 hr due to the precipitation of DDB. However, in the case of copolyvidone solid dispersion tablets, dissolution increased linearly and reached 93.4% after 2 hr. Reducing the volume of test medium from 900 to 300 ml markedly decreased the dissolution rate of the tablets containing 1 : 20 HPCD solid dispersions and 1 : 10 copolyvidone solid dispersion. For 1 : 20 copolyvidone solid dispersion tablets, there was no significant change in dissolution rate up to 1 hr with different volumes of test medium. Preparation of the copolyvidone solid dispersion (1 : 20) in capsules markedly delayed the dissolution (31.2 % after 2hr) due to the limited diffusion within capsules. The permeation rate $(13.4\;g/cm^2\;after\;8\;hr)$ of DDB through rabbit duodenal mucosa from copolyvidone solid dispersion (1 : 10) was markedly enhanced, when compared with drug alone or physical mixtures. From overall findings, DDB formulations containing copolyvidone solid dispersions (1 : 20) could be used to remarkably improve the dissolution rate in dosage form of powders and tablets.

• Corrosion Science and Technology
• /
• v.4 no.2
• /
• pp.45-50
• /
• 2005

A 3% NaCl solution of 1 $dm^3$ circulated with 1.5 $dm^3/min$ by a pump for 24 h in the presence of magnetic field. An iron plate immersed in a $100cm^3$ of test solution for 24 h. The rest potential and pH on surface fixed after 3 h. Containing 0~120 ppm of Fe(II) ion, the dissolution in the magnetically treated solution rose comparing with that in the non-magnetically treated solution. The dissolution amount reached to maximum at 50 ppm, then fixed in the non-magnetically treated solution. When Fe(II) ion existed in the magnetically treated solution, dissolution accelerated a little. In the non-magnetic treated solution containing 10~125 ppm of Fe(III) ion existed, the dissolution accelerated. The dissolution amounts reached to maximum at 50 ppm, then decreased from maximum value. In the magnetically treated solution, the dissolution amounts reached to minimum until 50 ppm, then increased from minimum value. The dissolution amounts affected larger with increasing of magnetic flux density. Fe(II), Fe(III) ions and magnetic treatment affected to formation of $Fe(OH)_2$ and/or $Fe_3O_4$ films. The magnetically treated effects memorized about one month.

• Corrosion Science and Technology
• /
• v.20 no.3
• /
• pp.105-111
• /
• 2021

In oxidizing nitric acid solutions, stainless steel undergoes intergranular corrosion accompanied by grain dropping and changes in the corrosion rate. For the safe operation of reprocessing plants, this mechanism should be understood. In this study, we constructed a three-dimensional computational model using a cellular automata method to simulate the intergranular corrosion propagation of stainless steel. The computational model was constructed of three types of cells: grain (bulk), grain boundary (GB), and solution cells. Model simulations verified the relationship between surface roughness during corrosion and dispersion of the dissolution rate of the GB. The relationship was investigated by simulation applying a constant dissolution rate and a distributed dissolution rate of the GB cells. The distribution of the dissolution rate of the GB cells was derived from the intergranular corrosion depth obtained by corrosion tests. The constant dissolution rate of the GB was derived from the average dissolution rate. Surface roughness calculated by the distributed dissolution rates of the GBs of the model was greater than the constant dissolution rates of the GBs. The cross-sectional images obtained were comparable to the corrosion test results. These results indicate that the surface roughness during corrosion is associated with the distribution of the corrosion rate.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.319-324
• /
• 1998

Sol-gel derived phosphate water-sioluble glasses containing Cu were prepared. Powder-shape of glasses were added in D.I water used polyethylene bottle. After solution contained glass powder were submerged in water bath on 25$^{\circ}C$ their dissolution behavior/characteristics bactericidal effect and cytotoxicity test were evaluated. The maximum amount of Cu(35 mol%) via sol-gel method was more 5 mol% increased than that with melting process. The stage of total dissolution was more dominant than that of selective leaching dur-ing dissolution due to dissolved amount of glasses increased linearly with time. The ratio of Cu+ to {{{{ {Cu }^{2+ } }} was 3:7 so that the structure of glasses is more predominant 2-dimension chain structure than 3-dimenshion po-lymeric structue. The stage of total dissolution was more dominant than that of selective leaching during dissolution. Bactericidal effect against all bacteria showed that solutions which contained 40 ppm and 100 ppm of Cu killed 80 percentages of bacteria within 2 hours and 100 percentages of those within 12 hours. The results of cytotoxicity test for L929 cells showed no cytotoxicity were observed within 96 hours for dis-solved solution that contains 40 ppm and 100 ppm of Cu.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.6
• /
• pp.381-385
• /
• 2008

Isosorbide dinitrate is an oral assiatant therapy agent of angina pectoris, myocardial infarction and congestive heart failure. The objective of this study was to formulate sustained release containing isosorbide dinitrate and assess their formulation variables. Pellets were prepared by fluid bed process and consist of drug layer and membrane layer. The pellets were coated with ethylcellulose along with $5{\sim}15%$ of plasticizer such as triacetin and diethyl butylrate. In vitro evaluation study was performed by comparative dissolution test between test and reference isosorbide dinitrate preparation. We could prepare sustained pellets of isosorbide dinitrate by fluid bed process which were reduced process time and had high content. The pellet coated with 1% ethylcellulose and triacetin(l5%) had a similar dissolution behavior compare to reference isosorbide dinitrate preparation controlling initial dissolution and those of dissolution at 30 min were 17.25 and 17.09%, respectively. Difference factor and similarity factor were $0{\sim}15$ and $50{\sim}100$ and there was no significant difference in bioequivalence between formulations. It might be concluded that our sustained release pellet of isosorbide dinitrate could be an alternatively delivery system to reference drug preparation.