• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.208-216
• /
• 2016

This paper reports the results of a field evaluation which used sampling and analytical methods to determine the levels of airborne hexavalent chromium Cr(VI) in major industrial complexes in Korea over a seven year period (2007-2013). Cr(VI) concentrations were determined using cellulose filter sampling and ion chromatography analysis. In order to validate the analytical performance of these methods, studies were also carried out to investigate data quality control (QC) parameters, such as the method detection limit (MDL), repeatability, and recovery efficiencies. The average concentrations of Cr(VI) for the nine industrial complexes in Korea were in the range of 0.09 to $1.40ng/m^3$, which is similar to of the concentrations in other industrial areas around the world. The impacts of Cr(VI) emissions from industrial areas on Cr(VI) concentrations in neighboring-residential areas were considerably low, and the dispersion of Cr(VI) from industrial areas to residential areas was estimated to be 'not-significant'. Cr(VI) levels were not affected by seasonal variation, which suggests that chromium was emitted continuously from the industrial sources throughout the year. The concentration of Cr(VI) measured accounted for 0.7 to 9.4 percent of the total chromium level, which is a low percentage compared to those in other urban areas around the world. This is the first report in an international journal of a field study conducted in Korea to determine the concentration of Cr(VI) in the ambient air of industrial and residential areas.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.1-7
• /
• 2003

지하 유류저장탱크에서 유류가 지속적으로 누출되는 경우에는 지하수 이동에 비해서 LNAPL의 이동을 무시할 수 없다. 본 연구에서는 지하수면 위에서 LNAPL의 이동을 고려한 수정된 용질이동 모델을 개발하였다 LNAPL 이동을 고려하지 않는 기존 모델과 비교한 결과 수두 구배, 누출되는 기름의 양, 분산지수에 따라 두 모델은 차이점을 보였다. 수두 구배가 낮을수록, 누출되는 유류의 양이 증가할수록 수정된 모델과 기존 모델 사이의 평균편차가 증가하였다. 분산지수가 변화함에 따라서 평균편차는 변하지 않았지만, 분산지수가 증가할수록 두 모델 사이의 편차는 공간적으로 보다 넓게 나타났다. 수직방향으로의 분산이 크게 나타날 경우에는 LNAPL의 이동을 고려한 모델과 이동을 고려하지 않은 모델과의 차이가 지하수 유동 방향뿐만 아니라 수직방향으로도 크게 나타났다. 결국 LNAPL의 이동을 무시할 수 없는 지하환경에서는 기존의 모델을 가지고 용질이동을 모사할 경우 실제보다 농도가 낮게 추정될 가능성이 높다. 이 연구의 결과로 LNAPL이 지하수면 위에서 얼마나 빨리 이동하는지 아는 것이 올바른 오염물의 농도 예측에 중요하다는 것을 파악하였다.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.619-633
• /
• 1994

천해역(淺海域)에서 굴절(屈折), 회절(回折) 및 쇄파(碎波)를 고려한 범용성(汎用性)있는 파랑변형모형(波浪變形模型)을 개발하였다. 기존(旣存)이 완경사방정식(緩傾斜方程式)으로부터 고차(高次)의 회절항(回折項)을 고려한 포물형근사방정식(抛物形近似方程式)을 유도하였으며, 난류모형(亂流模型)을 도입하여 저면마찰(底面摩擦) 및 쇄파(碎波)에 의한 에너지 감쇠항(減衰項)을 정식화(定式化)하였다. 본 모형(模型)의 수치해(數値解)는 Crank-Nicolson의 음해법(陰解法)으로 계산하였으며, 계산결과(計算結果)는 원형천퇴(圓形淺堆), 타원형천퇴(楕圓形淺堆) 및 쇄파대(碎波帶)에서의 여러가지 수리실험결과(水理實驗結果)와 비교하였다. 쇄파대(碎波帶)에서 파고감쇠양상(波高減衰樣相)은 입사파(入射波)의 파형경사(波形傾斜)에 따라 민감(敏感)하게 반응(反應)하였으며, 타원형천퇴(楕圓形淺堆) 주변(周邊)에서 비선형분산관계(非線型分散關係)와 에너지 감쇠효과(減衰效果)는 파고변화(波高變化)를 잘 설명하였다. 그리고 본 모형(模型)을 현지해안(現地海岸)에 적용하여 타당성(妥當性)있는 계산결과(計算結果)를 얻었다.

• 자원환경지질
• /
• 제31권4호
• /
• pp.277-290
• /
• 1998

The purpose of this research is to investigate the dispersion pattern of gold during skarnization and genesis of gold mineralization in the Sangdong skarn deposits. The Sangdong scheelite orebodies are embedded in the Cambrian Pungchon Limestone and limestone interbedded in the Myobong Slate of the Cambrian age. The tungsten deposits are classified as the Hangingwall Orebody, the Main Orebody and the Footwall Orebody as their stratigraphic locations. Recently, the Sangdong granite of the Cretaceous age (85 Ma) were found by underground exploratory drillings below the orebodies. In geochemisty, the W, Mo, Bi and F concentrations in the granite are significantly higher than those in the Cretaceous granitoids in southern Korea. Highest gold contents are associated with quartz-hornblende skarn in the Main Orebody and pyroxene-hornblende skarn in the Hangingwall Orebody. Also Au contents are closely related to Bi contents. This could be inferred that Au skarns formed from solutions under reduced environment at a temperature of $270^{\circ}C$. According to the multiple regression analysis, the variation of Au contents in the Main Orebody can be explained (87.5%) by Ag, As, Bi, Sb, Pb, Cu. Judging from the mineralogical, chemical and isotope studies, the genetic model of the deposits can be suggested as follows. The primitive Sangdong magma was enriched in W, Mo, Au, Bi and volatiles (metal-carriers such as $H_2O$, $CO_2$ and F). During the upward movement of hydrothermal ore solution, the temperature was decreased, and W deposits were formed at limestone (in the Myobong Slate and Pungchon Limestone). In addition, meteoric water influx gave rise to the retrogressive alterations and maximum solubility of gold, and consequently higher grade of Au mineralization was deposited.

• 한국토양비료학회지
• /
• 제49권2호
• /
• pp.218-225
• /
• 2016

This experiment was conducted in Suwon and Iksan city from 2012 to 2014 to evaluate soil erosion and nutrient loss from irrigated paddy fields during cropping period. Rainfall amount and rainfall erosivity of $EI_{30}$ were, on average, 1,026 mm and $3,922mm\;ha^{-1}yr^{-1}hr^{-1}$ for the cropping period, respectively, and the rainfall event with maximum $EI_{30}$ occurred in July. Annual average of runoff was $2,508MT\;ha^{-1}yr^{-1}$ in Suwon and $3,375MT\;ha^{-1}yr^{-1}$ in Iksan, accounting for 36% of rainfall of the cropping period. Nutrient loss by runoff, on average, was $7.0kg\;N\;ha^{-1}yr^{-1}$, $1.3kg\;P\;ha^{-1}yr^{-1}$, and $16.6kg\;K\;ha^{-1}yr^{-1}$; N, P, and K loss were 5.0, 0.6, and $8.3kg\;ha^{-1}yr^{-1}$, respectively, in Suwon and 8.9, 1.9, and $16.7kg\;ha^{-1}yr^{-1}$ in Iksan. Soil loss in Korean paddy rice was evaluated as $0.33MT\;ha^{-1}yr^{-1}$ ranging from $0.05MT\;ha^{-1}yr^{-1}$ to $0.88MT\;ha^{-1}yr^{-1}$. Amount of soil loss, however, depended on areas and year influenced by variation of rainfall amount and intensity. Interestingly, soil erosion in Iksan in 2012 was remarkably greater than those in other periods due to heavy rainfall between late May and June with soil flake dispersion right after the rice-planting season.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.7-13
• /
• 2008

To obtain a shear-wave velocity profile in geotechnical practice, various seismic investigation methods which have their own strength and weakness are being frequently used. Generally, geotechnical site have lateral variation of the properties, so it is needed to determine 2-dimensional shear wave velocity imaging of the site. In this study, harmonic wavelet analysis of wave (HWAW) method is applied to determination of 2-D $V_s$ imaging. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. HWAW method uses the signal portion of the maximum local signal/noise ratio to evaluate the phase velocity to minimize the effects of noise. HWAW method determine detailed local $V_s$ profile because one experimental setup which consists of one pair of receivers with spacing of 1~3m is used to determine the dispersion curve of the whole depth. So, 2-D Vs imaging with relatively high resolution can be determined through a series of HWAW test. In order to estimate the applicability of HWAW method, field tests were performed in 4 sites. Through field applications and comparison with other test results, the good accuracy and applicability of the proposed method were verified.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.782-787
• /
• 2017

There is growing interest in power inductors in which metal soft magnetic powder and epoxy resin are combined. In this field, the process technology for increasing the packing density of magnetic particles in an injection molding process is very important. However, little research has been reported in this regard. In order to improve the packing density, we investigated and compared the sedimentation heights of pastes for three types of soft magnetic alloy powders as a function of the mixing ratios and the type of resin used. Experimental results showed that the packing density was the highest (71.74%) when the mixing ratio was 80 : 16 : 4 (Sendust : Fe-S : CIP) according to the particle size using an SE-4125 resin. In addition, the packing density was found to be inversely related to the layer separation distance. As a result, it was confirmed that the dispersion of solid particles in the paste was important for curing; however, the duration of the curing process can greatly affect the packing density of the final composite.

• 한국환경과학회지
• /
• 제26권5호
• /
• pp.621-638
• /
• 2017

Meteorological characteristics related to variations in ozone ($O_3$) concentrations in the Korean peninsula before, during, and after Typhoon Talas (1112) were analyzed using both observation data and numerical modeling. This case study takes into account a high $O_3$ episode (e.g., a daily maximum of ${\geq}90ppb$) without rainfall. Before the typhoon period, high $O_3$ concentrations in the study areas (e.g., Daejeon, Daegu, and Busan) resulted from the combined effects of stable atmospheric conditions with high temperature under a migratory anticyclone (including subsiding air), and wind convergence due to a change in direction caused by the typhoon. The $O_3$ concentrations during the typhoon period decreased around the study area due to very weak photochemical activity under increased cloud cover and active vertical dispersion under a low pressure system. However, the maximum $O_3$ concentrations during this period were somewhat high (similar to those in the normal period extraneous to the typhoon), possibly because of the relatively slow photochemical loss of $O_3$ by a $H_2O+O(^1D)$ reaction resulting from the low air temperature and low relative humidity. The lowest $O_3$ concentrations during the typhoon period were relatively high compared to the period before and after the typhoon, mainly due to the transport effect resulting from the strong nocturnal winds caused by the typhoon. In addition, the $O_3$ increase observed at night in Daegu and Busan was primarily caused by local wind conditions (e.g., mountain winds) and atmospheric stagnation in the wind convergence zone around inland mountains and valleys.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.382-387
• /
• 2014

An all-reflective, simple noncollinear second harmonic (SH) autocorrelator is described for monitoring the shot-to-shot behavior of ultrashort high-power laser pulses. Two mirrors are used for the dispersion-free splitting of a pulse into two halves. One of the mirrors is able to adjust the delay time and angle between two halves of the laser pulse in a nonlinear crystal. We present the possibility of real-time measurement of the pulse duration, peak intensity (or energy), and the pointing jitters of a laser pulse, by analyzing the spatial profile of the SH autocorrelation signal measured by a CCD camera. The measurement of the shot-to-shot variation of those parameters will be important for the detailed characterization of laser accelerated electrons or protons.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.369-382
• /
• 2018

A free vibration analysis and wave propagation of functionally graded porous beams has been presented in this work using a high order hyperbolic shear deformation theory. Unlike other conventional shear deformation theories, a new displacement field that introduces indeterminate integral variables has been used to minimize the number of unknowns. The constituent materials of the beam are assumed gradually variable along the direction of height according to a simple power law distribution in terms of the volume fractions of the constituents. The variation of the pores in the direction of the thickness influences the mechanical properties. It is therefore necessary to predict the effect of porosity on vibratory behavior and wave velocity of FG beams in this study. A new function of the porosity factor has been developed. Hamilton's principle is used for the development of wave propagation equations in the functionally graded beam. The analytical dispersion relationship of the FG beam is obtained by solving an eigenvalue problem. Illustrative numerical examples are given to show the effects of volume fraction distributions, beam height, wave number, and porosity on free vibration and wave propagation in a functionally graded beam.