• 제목/요약/키워드: Dispersion index

검색결과 293건 처리시간 0.03초

Geomorphologic Nash Model with Variable Width Function

  • Thuy, Nguyen Thi Phuong;Kim, Joo-Cheol;Jung, Kwansue
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.212-212
    • /
    • 2015
  • So far, geomorphologic dispersion due to the heterogeneity characteristics of flow paths in a basin has been demonstrated as a major factor affecting to the hydrologic response function of a catchment. This effect has considered by many previous studies taking into account flow path length factors, especially in the application of width function. Based upon the analysis of topographic index, another important geomorphologic factor extracted from DEM data, this work presents a new factor named saturation to evaluate its effects to the formation of the well-known instantaneous unit hydrograph (IUH) in Nash model and drainage structure in a river basin. First, the geomorphologic parameters corresponding to different saturation conditions are computed from DEM data with the support of GIS software. Then, in the combination of hydrologic and geomorphologic data, effective rainfall in each saturation degree and the Nash parameters are calculated using excel. Finally, the verification process with direct runoff data is conducted using Fortran programming. This process is applied to five sub-watersheds in Bocheong catchment ($485.21km^2$) in Korea where the necessary data are available and believable. The results from this approach will improve researchers and students'understandings about the relationship between rainfall and runoff and its relation with drainage structure within a catchment.

  • PDF

A Study on Unfolding Asymmetric Volatility: A Case Study of National Stock Exchange in India

  • SAMINENI, Ravi Kumar;PUPPALA, Raja Babu;KULAPATHI, Syamsundar;MADAPATHI, Shiva Kumar
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권4호
    • /
    • pp.857-861
    • /
    • 2021
  • The study aims to find the asymmetric effect in National Stock Exchange in which the Nifty50 is considered as proxy for NSE. A return can be stated as the change in value of a security over a certain time period. Volatility is the rate of change in security value. It is an arithmetical assessment of the dispersion of yields of security prices. Stock prices are extremely unpredictable and make the investment in equities risky. Predicting volatility and modeling are the most profuse areas to explore. The current study describes the association between two variables, namely, stock yields and volatility in equity market in India. The volatility is measured by employing asymmetric GARCH technique, i.e., the EGARCH (1,1) tool, which was used in building the study. The closing prices of Nifty on day-to-day basis were used for analysis from the period 2011 to 2020 with 2,478 observations in the study. The model arrests the lopsided volatility during the mentioned period. The outcome of asymmetric GARCH model revealed the subsistence of leverage effect in the index and confirms the impact of conditional variance as well. Furthermore, the EGARCH technique was evidenced to be apt in seizure of unsymmetrical volatility.

Terahertz Complex Refractive Index and Guiding of White Staghorn Coral

  • Kang, Chul;Kim, Myunghwan;Kim, Hyeongmun;Park, Jin Young;Kim, Bok Hyeon;Maeng, Inhee;Choi, SooBong;Kim, Soeun;Kee, Chul-Sik
    • Current Optics and Photonics
    • /
    • 제5권4호
    • /
    • pp.370-374
    • /
    • 2021
  • Corals are the remains of animals that grow on warm beaches. They have been used as decorative jewels because of their variety of colors, and as medicinal materials for treating cancers, AIDS, and other therapeutic uses because of their chemical elements. Corals are mainly composed of calcium carbonate (CaCO3) and have many air pores, tens to hundreds of micrometers in size. The refractive indices and absorption coefficients of dried sliced staghorn corals are investigated using terahertz time-domain spectroscopy. The measured values are similar to those for CaCO3, as expected. It is observed that a sample with a microstructure formed by air pores can guide terahertz waves. The dispersion, effective index, and loss of the guiding modes of coral core surrounded by five triangular air pores are numerically calculated. The simulated spatial distribution of the electric field of the guide mode at 1.25 THz shows the mode to be tightly confined to the core.

한국공원의 최대일율 및 회전율에 관한 연구 (A Study on the Maximum Rate of Daily Users and the Turnover Rate of Parks in Korea)

  • 임승빈;조형준;김대현
    • 한국조경학회지
    • /
    • 제18권4호
    • /
    • pp.29-44
    • /
    • 1991
  • The purpose of this study is to investigate the maximum rate of daily users and the turnover rate of parks in Korea. Median calculation, percentile analysis, and regression analysis methods were adopted for the investigation of the maximum rate of daily users. The maximum level, adaptable level and current dispersion of each index were analyzed. The results are summarized as follows. 1) It is location, kinds of facility, and purpose of visiting that mainly affect the concentration pattern of the number of park users. 2) Parks are devided into such three types as common urban park, royal tomb park, and large amusement park. 3) Spring is the peak season in all parks. 4) The maximum daily rates of the three types of parks are 0.92%, 1.86%, 1.18% respectively and the turnover rates are 18%, 54%, 63% respectively. 5) The results of this study show the necessity of the revision of the existing maximum daily rate and turnover rate.

  • PDF

화학적 박리방법과 ESPI에 의한 재생된 폴리올레핀 범퍼수지의 물성평가 (Characterization of Polyolefin Bumper Recycled by Chemical Removal Method using Electronic Speckle Pattern Interferometry)

  • 김현경;강기수;김경석;홍진후
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.295-298
    • /
    • 1997
  • Recycl ing of PP/EPR based bumper coated with polyester urethane paint has been per formed by chemical decoating method. Electronic Speckle Pattern Interferometry (ESP11 has been applied to characterize the deformation of polyolef in based bumper. In additon, physical properties and processability of recycled materials have been investigated by dynamic mechanical thermal analysis, impact test and melt flower index measurement. The results show that the deformation ratio of recycled material is higher than that of virgin one. The morphological change of EPR, degree of distribution and dispersion during the recycling process seem to be the most important factor for the deformation and the mechanical properties of recycled materials. The experimental results obtained show that ESPI is very powerful technique to study the thermal mechanical property of polyolefin bumper system.

  • PDF

Environmental Distribution of Air Pollutants and Environmental Risk Assessment in Regional Scale

  • Matsumoto, Fumio;Saito, Mitsugu;Otsuka, Naohiro
    • International Journal of Safety
    • /
    • 제9권1호
    • /
    • pp.35-42
    • /
    • 2010
  • We measured the concentrations of air pollutants at several residential sites, roadside sites and industrial sites in Iwate Prefecture, Japan. And the concentration distributions of air pollutants were estimated by atmospheric dispersion model using air emissions data. Based on those results, we calculated environmental risk of air pollutants emitted in Iwate Prefecture. As a result, it was found that the surround of factories with high emissions and highly toxic chemicals and the roadsides were high risk area, benzo(a)pyrene, formaldehyde and ozone exceeded the $10^{-5}$ risk level. Moreover, we tried to use "Loss of life expectancy: LLE" for an index to explain those risk to general public intelligibly. The total LLE of the carcinogenic chemicals was about 8.6 hours. Moreover, LLE of ozone was about 9.2 hours. Ozone has a big influence compared with the carcinogenic chemicals.

Fresnel 렌즈 금형 가공기술 연구 (A Study on the Machining of Fresnel Lens Mould)

  • 제태진;황경현;이응숙;김재구
    • 연구논문집
    • /
    • 통권25호
    • /
    • pp.105-113
    • /
    • 1995
  • Fresnel lenses are developed for flat optics with the optical characteristics close to aspherical lens such as sharp focusing and dispersion instead of spherical or aspherical surface. Usually, these fresnel lenses and diffraction gratings are machined by high-energy beam such as electron beam machining, but recently with the development of ultra precision machine tool and machining technology, 3-dimension micro machining becomes preferable. This study on the micro machining of fresnel lens is carried out to develop the basic technology of ultra precision micro machining. The machined lens mold will be used for the manufacturing of fresnel lens with 120mm focal distance using synthetic resin material with 1.49 refractive index(PMMA), and the shape of lens is 48mm diameter, $300\mum$ pitch and about $5-700\mum$depth of groove in brass.

  • PDF

Circular Polarizers for Reflective LCDs

  • Yoshimi, Hiroyuki;Yano, Shuji;Fujimura, Yasuo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.905-909
    • /
    • 2002
  • Characteristics of reflective LCDs, which have gained a lot of notice in recent years, rely largely on optical design of circular polarizers and the quarter-wave plates, as a component. Important design includes wavelength dispersion, viewing angle, uniformity of display and matching of refractive index. Our work has contributed to improving performance of reflective LCDs by enhancing the characteristics of polymer film using stretching and optical lamination technologies. To design that offers higher contrast and wider viewing angle, we have discovered that it is necessary to control viewing angle variation of the polarizing axis in order to compensate for the viewing angle of the polarizing film as well as the optical anisotropic properties of liquid crystal. Applying this technology to circular polarizers used for reflective LCDs enables design of wide viewing angle circular polarizers. In order to realize higher contrast for reflective LCDs, it is also necessary to design other optical materials including polarizing films. For design of hybrid optical film, it is particularly necessary to reduce surface reflection and interface reflection. This paper also reports our findings concerning this topic.

  • PDF

Scale-dependent thermal vibration analysis of FG beams having porosities based on DQM

  • Fenjan, Raad M.;Moustafa, Nader M.;Faleh, Nadhim M.
    • Advances in nano research
    • /
    • 제8권4호
    • /
    • pp.283-292
    • /
    • 2020
  • In the present research, differential quadrature (DQ) method has been utilized for investigating free vibrations of porous functionally graded (FG) micro/nano beams in thermal environments. The exact location of neutral axis in FG material has been assumed where the material properties are described via porosity-dependent power-law functions. A scale factor related to couple stresses has been employed for describing size effect. The formulation of scale-dependent beam has been presented based upon a refined beam theory needless of shear correction factors. The governing equations and the associated boundary conditions have been established via Hamilton's rule and then they are solved implementing DQ method. Several graphs are provided which emphasis on the role of porosity dispersion type, porosity volume, temperature variation, scale factor and FG material index on free vibrational behavior of small scale beams.

MASS DISTRIBUTION IN THE CENTRAL FEW PARSECS OF THE MILKY WAY

  • Oh Seungkyung;Kim Sungsoo S.;Figer Donald F.;Morris Mark
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2004년도 한국우주과학회보 제13권2호
    • /
    • pp.290-292
    • /
    • 2004
  • Near-IR observations of the central few parsecs of our Galaxy from the HST/NICMOS have been analyzed to produce H, K photometry. We have cross-identified our photometry with the Keck high-resolution spectrometry of the central 0.5 pc of our galaxy to distinguish evolved late-type stars from early-type stars, and use late-type stars as tracer population. We perform several statistical tests to find the best fitting parameters of stellar density distribution and velocity dispersion models, then derive volume number densities and velocity dispersions. The volume number density distribution has power law index $1.55\~1.7$. We then derive the mass distribution in the Central region of our Galaxy using the Jeans equation.

  • PDF