• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.672-680
• /
• 2018

본 연구에서는 유한요소해석을 이용하여 냉장고 얼음 디스펜서 작동 시에 덕트 캡 조립체가 열리는 과정을 해석하고 캡의 개방각도를 평가하였으며, 얼음 배출을 원활하게 하기 위하여 캡의 개방각도를 최대화할 수 있는 설계개선안을 도출하였다. 덕트 캡 조립체의 기존설계안에 대하여 모터 작동 시의 입력회전각에 대한 과도구조해석을 수행하였으며 해석결과, 캡의 개방각도는 레버가 강체일 경우에만 가능한 개방각도 상한값의 78%로 나타났다. 캡 개방각도에 미치는 주요 설계인자의 영향을 검토하기 위한 여러 가지의 설계수정안을 도출하고 해석을 수행하였다. 설계수정안의 해석결과, 레버 재질을 탄성계수가 큰 재질로 변경하거나, 지지부의 위치를 모터 측으로 이동하거나, 레버의 축 직경을 증가시키면 개선효과가 높아지는 것으로 나타났다. 구조설계의 변경에 따라 수반되는 제작비용 측면도 고려하면, 얼음 디스펜서 케이스의 기존 구조를 변경하지 않고 레버 재질만 기존의 합성수지에서 알루미늄합금으로 변경하는 설계수정안이 가장 우수한 것으로 나타났다. 결론적으로, 레버 재질을 알루미늄합금으로 변경하면 캡의 개방각도를 상한값의 95%까지 개선할 수 있을 것으로 판단된다. 본 연구에서 제시한 해석 방법 및 결과는 얼음 배출이 원활하도록 덕트 캡 조립체의 구조를 설계하는데 큰 도움이 될 것으로 기대된다.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.43-52
• /
• 2003

The new principle to measure a sizing degree by a contact angle was developed using an automatic determination of the 3-end point coordinates of the water droplet on a sheet, which could diminish the operator's bias during measurement. A constant amount of water was first placed on a sample sheet by a water dispenser, and then an image of the liquid droplet was captured by a digital camera and then transmitted to a computer. The program measuring for contact angle extracted a liquid contour by Gaussian function combined with a 8-direction chain code. The Euclidean equation was applied to the binary image of the liquid contour in order to measure the diameter of the contour. Finally, the contact angle of the liquid was calculated by using the diameter and the top coordinates. In addition, a surface free energy of the sample sheet and an elapsed time taken up to the complete absorption into the sheet were simultaneously measured with the contact angle.

• 한국항공우주학회지
• /
• 제40권7호
• /
• pp.616-622
• /
• 2012

본 논문에서는 센터 파일론에 150갤런 외부 연료 탱크를 장착한 전투기의 전술기동 중 섬광탄 운용의 문제점을 검토하고 운용 가능한 방안을 제시하였다. 섬광탄 발사시 투하 궤적 및 외부 연료 탱크 수평 핀의 손상 범위를 풍동실험과 수치해석을 통해 분석하였다. 핀의 손상을 방지하기 위한 방안으로 1) 섬광탄 발사 각도를 조정하는 방안과 2) 핀의 형상을 변경하는 방안을 비교 검토 및 실용성을 분석한 결과 핀을 재설계하는 방안이 채택되었다. 풍동실험을 통하여 재설계한 수평 핀을 장착한 외부 연료 탱크의 투하 안전성을 평가하였다.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.414-420
• /
• 2013

We developed inkjet based measurement system for micro-droplet behavior on a substrate. By using the inkjet dispenser, a droplet, which is as small as few pico-liter in volume, can be jetted and the amount can be controlled. After jetting, the droplet image on the substrate is acquired from side view camera. Then, droplet profile is extracted to measure droplet volume, contact angle and evaporation characteristics. Also top view image of the droplet is acquired for better understanding of droplet shape. The previous contact angle measurement method has limitations since it mainly measures the ratio of height and contact diameter of droplet on a substrate. Unlike previous measurement system, our proposed method has advantages because various behavior of droplet on substrate can be effectively analyzed by extracting the droplet profile.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1589-1592
• /
• 2003

Automatic grease lubricator of gear type was developed by mechanical design, analysis and test with products manufactured by rapid prototyping machine. The mechanism of gear driving was designed in similar to the watch mechanism and lubrication could be controlled by PCB circuit. The body of the lubricator was analyzed by stress analysis with different constructed angle. Digital mockup was analyzed and RP products were combined with PCB circuit and grease. RP products and injection moulding products were tested and compared for roughness and roundness, Finally the grease was drained out for testing the time.

• 펄프종이기술
• /
• 제37권1호
• /
• pp.73-81
• /
• 2005

Stockigt sizing test, which is readily affected by individual tester's bias as well as testing conditions in recognizing red coloration, had to be modified to improve its reliability and reproducibility. The novel testing system with the automatic recognizing program of red coloration was developed with the auxiliary equipments including an automatic liquid dispenser and a specimen shifter. The analysis program used a hue value of a droplet image in recognizing a point of time on red coloration instead of RGB values that are not similar to human perception of color. Hue was more sensitive in recognizing the red coloration of a droplet than the other two factors, Saturation and Value. During the test, the program records the time consumed up to a specific hue value of a droplet on a specimen. Differently from the conventional test, the automatic test could obtain a reliable and reproducible sizing degree with a minor error. Furthermore, the Stockigt sizing degree measured by the automatic system showed great correlations with contact angle and Hercules sizing degree. It means that such great correlations will contribute to the development of an integrated measuring system capable of predicting contact angle, surface tension, surface energy and Hercules sizing degree of paper and paperboards through the Stbckigt sizing test. It was meaningful to note that the automatic system for Stbckigt sizing test might be able to used to predict contact angle, Hercules and Cobb sizing degree, based upon the high correlation coefficients.