• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.428-433
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit(IC) fabrication and surface mount technology. The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.96-104
• /
• 2008

An egg grading machine is composed of many mechanisms of which functions are to carry eggs to the bucket in that sensors are located to categorize eggs by their weight, to transfer eggs from the basket of packer holder to the mold tray, to feed the mold tray dispenser after egg chairs are filled with eggs. This paper deals with the analysis and new design of packer holder mechanism of which function is transfer eggs vertically from the bucket conveyor to the mold tray dispenser. Egg is fragile to impact so in designing packer holder mechanism it is necessary to estimate moving speed, acceleration and impact when eggs are touched by any links of mechanism and mold tray dispenser. A new packer holder mechanism is proposed in this paper, which use quick return mechanism composed of 6 links with pin and contact joints.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.272-278
• /
• 2006

This study is quantitatively assessing of safety about dispenser of hydrogen station because it is hydrogen energy to efficient safety use. The large leakage of hydrogen gas is the most important accident among others occurrence possibility in hydrogen station. It had written FT by top event and calculated unavailability, m-cutsets, leakage frequency, etc with FTA after each base event collect reliability data by reliability data handbook, THERP-HRA and estimation of the engineering.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.95-100
• /
• 2012

This study is about the qualitative safety assessment for hydrogen gas filling facilities in Korea operating with one-bank type. The purpose of this safety assessment is about the development of components for design, fabrication, assembly, operability of dispenser and systems of the safety. For the qualitative safety assessment method, the study used FMEA(failure mode & effect analysis) and HAZOP(hazard & operability). This study evaluated the safety through FMEA and HAZOP then by referring to P&ID and PFD of hydrogen dispenser, thereby examining the dangerousness of the equipments, defects of the structure and problems of the operation.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.139.1-139.1
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1566-1569
• /
• 1997

In this paper, we developed newer cooling system which has better efficiency and make smaller pollution than older cooling system compressor type by using TEC Module. And then we investigated application of Peltier Effect cooling technology applied to the cold water dispenser.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1195-1198
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.731-732
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.52.2-52
• /
• 2001

We propose a new optimization method to improve the productivity of dispenser machines in PCB assembly lines. The optimization problem for multi-nozzle dispensers is formulated as a variant TSP. A genetic algorithm is applied to the problem to get a near-optimal solution. Chromosome and some operator are newly defined to implement the genetic algorithm for multi-nozzle dispensers. Simulation results are then presented to verify the usefulness of the method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.65-72
• /
• 2020

A refrigerator equipped with an ice dispenser has ice cubes in its ice bucket to discharge the required amount of ice. On the other hand, the ice cubes in the bucket may clump together if the refrigerator is filled with ice and is not used for a long time or during normal operation. Although a mechanism for separating the ice mass is provided, the ice mass cannot be removed completely if the ice blocking is severe. To solve this problem, after investigating the existing research on the process of ice entanglement and the separation force, this study tested ice extraction under a range of conditions of artificially entangled ices. In this process, new mechanisms are proposed to resolve the problem of existing ice storage features that prevent the extraction of ice and to expand the working radius of the icebreaking mechanism for full extraction. The prototype of the proposed mechanism was also fabricated in an actual refrigerator. As a result, the proposed shape and mechanism could extract the ice cubes in the bucket completely, while the existing ice dispenser could extract only 65%.