• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.428-433
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit(IC) fabrication and surface mount technology. The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.96-104
• /
• 2008

An egg grading machine is composed of many mechanisms of which functions are to carry eggs to the bucket in that sensors are located to categorize eggs by their weight, to transfer eggs from the basket of packer holder to the mold tray, to feed the mold tray dispenser after egg chairs are filled with eggs. This paper deals with the analysis and new design of packer holder mechanism of which function is transfer eggs vertically from the bucket conveyor to the mold tray dispenser. Egg is fragile to impact so in designing packer holder mechanism it is necessary to estimate moving speed, acceleration and impact when eggs are touched by any links of mechanism and mold tray dispenser. A new packer holder mechanism is proposed in this paper, which use quick return mechanism composed of 6 links with pin and contact joints.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.272-278
• /
• 2006

This study is quantitatively assessing of safety about dispenser of hydrogen station because it is hydrogen energy to efficient safety use. The large leakage of hydrogen gas is the most important accident among others occurrence possibility in hydrogen station. It had written FT by top event and calculated unavailability, m-cutsets, leakage frequency, etc with FTA after each base event collect reliability data by reliability data handbook, THERP-HRA and estimation of the engineering.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.95-100
• /
• 2012

This study is about the qualitative safety assessment for hydrogen gas filling facilities in Korea operating with one-bank type. The purpose of this safety assessment is about the development of components for design, fabrication, assembly, operability of dispenser and systems of the safety. For the qualitative safety assessment method, the study used FMEA(failure mode & effect analysis) and HAZOP(hazard & operability). This study evaluated the safety through FMEA and HAZOP then by referring to P&ID and PFD of hydrogen dispenser, thereby examining the dangerousness of the equipments, defects of the structure and problems of the operation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.139.1-139.1
• /
• 2005

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1566-1569
• /
• 1997

In this paper, we developed newer cooling system which has better efficiency and make smaller pollution than older cooling system compressor type by using TEC Module. And then we investigated application of Peltier Effect cooling technology applied to the cold water dispenser.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1195-1198
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.731-732
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.52.2-52
• /
• 2001

We propose a new optimization method to improve the productivity of dispenser machines in PCB assembly lines. The optimization problem for multi-nozzle dispensers is formulated as a variant TSP. A genetic algorithm is applied to the problem to get a near-optimal solution. Chromosome and some operator are newly defined to implement the genetic algorithm for multi-nozzle dispensers. Simulation results are then presented to verify the usefulness of the method.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.65-72
• /
• 2020

얼음을 제공하는 기능이 구비된 냉장고는 대부분 냉장고 내부의 얼음 저장소에 미리 얼음을 채워 두고 사용자가 필요할 때 많은 양의 얼음을 취출할 수 있도록 하고 있다. 그러나 냉장고의 얼음 저장소에 얼음이 채워진 상태로 냉장고가 장기간 사용되지 않거나 정상적인 동작 중에도 시간이 경과하면 얼음이 서로 엉기는 현상이 발생한다. 이렇게 엉긴 얼음 덩어리를 분리시키는 메커니즘이 구비되어 있으나 얼음 엉김 현상이 심할 경우 얼음이 완전히 취출되지 못하는 문제가 있다. 본 연구에서는 이러한 문제를 해결하기 위해 얼음이 엉기는 과정과 얼음의 분리력에 관한 기존의 연구를 조사하였고, 인위적으로 얼음을 엉기게 하여 다양한 조건에서 얼음의 취출 정도를 실험하였다. 이 과정에서 얼음의 취출을 방해하는 기존 얼음 저장소 형상의 문제점에 착안하여 이를 개선하기 위한 형상과, 완전 취출을 위해 얼음 분쇄 메커니즘의 작동 반경을 넓히는 새로운 메커니즘을 제안하였다. 제안된 메커니즘의 시제품을 제작하고 실제 냉장고에 적용하여 얼음이 완전 취출됨을 검증하였다. 그 결과 기존 얼음 저장소의 형상과 분쇄 메커니즘에서 얼음 취출률이 65%정도이었으나, 제안된 형상과 메커니즘에서는 완전히 추출되었다.