In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.
최근에 블로그, UCC, IPTV 등 사용자 중심의 인터넷 서비스와 언제 어디서나 웹을 통해 서비스를 받을 수 있는 유비쿼터스 컴퓨팅 환경으로의 변화는 안정된 서비스를 제공할 수 있는 고가용 시스템 플랫폼을 필요로 한다. 고가용 시스템이란 네트워크상에 서버들을 클러스터로 구성함으로써 만약 서비스 하던 시스템이 고장과 같은 시스템 장애가 발생하더라도 계속해서 안전하게 서비스를 제공할 수 있는 시스템을 말한다. 그리고 이러한 고가용 시스템 플랫폼에서 서비스의 신뢰성을 위해 시스템 간 데이터 동기화는 필수적이다. 본 논문에서는 리눅스 고가용 시스템에서 로컬 디스크 간 실시간 데이터 동기화 기술인 DRBD(Distributed Replicated Block Disk)를 구현하였다.
This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.
본 논문은 클러스터 기반의 분산 구조를 갖는 CCMSS(Clustered Continuous Media Storage Server) 시스템의 미디어 검색 동작에 대해 디스크의 입출력 지연 시간 뿐맘 아니라 내부 네트워크의 통신 지연 시간을 함께 고려한, 열린 큐잉 네트워크 기반의 해석적 모델을 제시하고 이를 이용하여 전체 서비스 지연 시간에 대한 확률적 모델을 정의한다. 그리고 정의된 확률적 모델을 바탕으로 허용된 서비스 실패율 범위에서 최대 서비스 가능한 사용자 요구 수를 구하고 이 값을 이용하여 승인 제어를 수행하는 통합형 통계적 승인 제어 모델을 제안한다. 제안된 승인 제어 기법의 성능 분석을 위해 단순히 디스크 성능만을 고려한 확률적 모델과 본 논문에서 제안한 디스크 성능과 내부 네트워크의 성능을 함께 고려한 확률적 모델을 통해 산출한 마감시간 실패율과 실제 클러스터 기반 서버 환경에서 모의 실험을 통해 얻은 결과를 비교하였으며, 실험 결과에 대한 분석을 통해 제안된 승인 제어 기법이 CCMSS 시스템의 실제 서비스 지연 요소를 정확히 반영하고 있다는 것을 알 수 있었다.
Fluoric acid etching is an essential procedure in cementation of reinforced ceramics to tooth surface. But there have been few studies about the changes of surface structure and flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to the etching time. The objectives of this study were to examine the surface structure changes and the difference in biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to various etching times. Sixty one disk-shaped specimens of IPS $Empress^{(R)}$ 2 ceramic($14mm{\times}1.2mm$) were fabricated for the biaxial flexural strength test and SEM analysis according to the manufacturer's recommendations. Sixty specimens were divided into 6 groups(n=10) according to the time of HF acid etching(0, 20, 180 and 300s)and silane/resin cement application. Each disk was loaded using a piston-on-3 ball biaxial configuration in a universal testing machine. The failure loads(N) were recorded, and the biaxial flexural strength for each disk was calculated. A one-way analysis of variance and independent t-test on transformed fracture strength data were used to determine significant differences between groups. The groups of no cementation showed a trend toward progressive weakening with increasing the etching time. However, this was not statistically significant at p=0.05 level. The groups of resin cementation exhibited no apparent trend in their mean strength values. SEM photomicrographs showed very different results of etching. Within the conditions of this study, alteration of surface topography by acid etching does not have a deleterious effect on the biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic.
RILEM위원회가 제시한 3점 휨 시험은 하중-변위곡선 형상이 불규칙하고 안정된 균열 발생 후 최종 균열이 발생하기 때문에 정확한 파괴인성을 구하는 것은 어렵다. 그러나 디스크 시험은 균열개시하중만 알면 쉽게 파괴인성을 구할 수 있다. 따라서, RILEM위원회가 제시한 3점 휨 시험보다 파괴인성 계산의 편리함을 보이기 위해 중앙에 노치가 있는 고강도 콘크리트 디스크를 실험하여 실험결과와 유한요소해석에 의한 결과를 비교하였다. 또한 실험에 의한 파괴 포락선과 이론에 의한 파괴 포락선도 비교하였으며, 콘크리트 강도수준에 따른 파괴특성의 차이를 나타내었다. 본 연구의 결과는 다음과 같다 유한요소해석과 실험결과를 비교해 볼 때, 최대 원주방향 인장응력 이론을 적용한 유한요소해석은 실험결과와 좋은 일치를 보였다. 그리고 콘크리트의 강도수준에 따른 파괴특성의 차이는 균열개시하중과 파괴인성 등에 영향을 끼치지만 최종 균열전파각의 변화에는 큰 영향이 없었다. 또한, 최대 원주방향 인장응력이론에 의한 파괴 포락선과 실험에 의한 포락선이 일치하지 않는 이유는 콘크리트에서 혼합모드와 면내전단모드(모드 II) 파괴를 유발하는 데 필요한 에너지량이 크기 때문이라고 판단된다
PURPOSE. The purpose of this study was to evaluate the effect of nano-structured alumina surface coating on shear bond strength between Y-TZP ceramic and various dual-cured resin cements. MATERIALS AND METHODS. A total of 90 disk-shaped zirconia specimens (HASS CO., Gangneung, Korea) were divided into three groups by surface treatment method: (1) airborne particle abrasion, (2) tribochemicalsilica coating, and (3) nano-structured alumina coating. Each group was categorized into three subgroups of ten specimens and bonded with three different types of dual-cured resin cements. After thermocycling, shear bond strength was measured and failure modes were observed through FE-SEM. Two-way ANOVA and the Tukey's HSD test were performed to determine the effects of surface treatment method and type of cement on bond strength (P<.05). To confirm the correlation of surface treatment and failure mode, the Chi-square test was used. RESULTS. Groups treated with the nano-structured alumina coating showed significantly higher shear bond strength compared to other groups treated with airborne particle abrasion or tribochemical silica coating. Clearfil SA Luting showed a significantly higher shear bond strength compared to RelyX ARC and RelyX Unicem. The cohesive failure mode was observed to be dominant in the groups treated with nano-structured alumina coating, while the adhesive failure mode was prevalent in the groups treated with either airborne particle abrasion or tribochemical silica coating. CONCLUSION. Nano-structured alumina coating is an effective zirconia surface treatment method for enhancing the bond strength between Y-TZP ceramic and various dual-cured resin cements.
An archive system is designed to store data for a long time without loss. However, many important factors such as temperature, dust, vibration, and humidity must be considered to design a successful archive system. Read/write devices, for example optical disk drives(ODDs), in an archive system generate heat while they are in operation. Fans are usually used to remove heat but the air flow accompanies dust into the system result in system failure. In this study, an archive system with six ODDs is chosen as an analysis model and flow together with temperature distributions are computed using a CFD simulation package. Flow analysis is focused on four cooling fans at the rear panel and temperature distribution is studied for various cases of fan operation. From the temperature point of view, fans give significant effects on $4^{th}$ to $6^{th}$ ODDs compared to the $1^{st}$ to $3^{rd}$ ODDs. Also, it is noticed which fan is the most important as far as cooling is concerned.
최근 실시간 서비스의 요구 사항을 갖는 위치 기반 서비스(Location Based Service : LBS)와 텔레매틱스(Telematics) 서비스를 효율적으로 제공하기 위해서 공간 메인 메모리 DBMS에 대한 관심이 급증하고 있다. 이러한 공간 메인 메모리 DBMS에서는 시스템 장애가 발생하였을 경우 메인 메모리상의 모든 공간 데이타를 잃어버릴 수 있으므로 데이타베이스의 안정성을 위한 회복 시스템은 매우 중요하다. 회복 시스템에서 로그와 체크포인트 수행 과정 중 발생하는 디스크 입출력은 전체 시스템 성능을 저하하는 중요한 요인이 되고 있다. 그러므로, 공간 메인 메모리 DBMS에서 디스크 입출력을 줄일 수 있는 효율적인 회복 시스템에 대한 연구가 절실히 필요하다. 본 논문에서는 공간 메인 메모리 DBMS를 위한 효율적인 회복 시스템에 대해서 연구하였다. 먼저 로그 기법으로는 디스크 입출력을 줄이고 트랜잭션의 동시성 향상을 위해 사전 완료 기법을 사용하였고, 전체 시스템 성능을 향상시키기 위해 기존의 퍼지-핑퐁 체크포인트 기법에서 발생하는 동일 페이지에 대한 중복 디스크 입출력 문제를 해결한 퍼지-쉐도우 체크포인트 기법을 제안하여 회복 시스템 구현 시 사용하였다. 그리고 마지막으로 본 논문에서 개발한 회복 시스템의 성능 평가를 수행하여 효율성을 입증하였다.
DREAM-S는 ATM 네트워크용 교환 시스템에서 응용 프로그램들의 교환기 운용 데이터에 대한 실시간 처리 요구를 지원하기 위한 분산 주기억장치 상주 데이터베이스 시스템(Main Memory Database Systems)이다. DREAM-S는 클라이언트-서버 구조를 가지면서 서버 프로세서에만 디스크가 연결되어 있으며, 대량의 데이터로부터 원하는 데이터를 신속히 검색하기 위하여 T- Tree 색인 구조를 제공한다. 본 논문에서논 DREAM-S에서 T- Tree 색인 구조에 대한 회복 기법를 제안한다. 주기억장치 상주 데이터베이스는 디스크 상주 데이터베이스 보다 뛰어난 성능을 제공하지만 시스템 고장 시(정전 등과 같은 오류) 주기억장치에 저장된 모든 데이터(릴레이션과 색인 구조)가 파손될 수 있다. 따라서 고장 후 파손된 주기억장치 데이터베이스를 신속히 정상 데이터베이스 상태로 회복하는 회복 기법이 필수적이다. 제안된 회복 기법에서는 T-Tree 색인 구조를 각 프로세서의 주기억장치에만 유지하도록 함으로서 ATM 교환기 시스템의 성능에서 병복 현상을 일으킬 수 있는 서버 프로세서의 디스크 출입 오버헤드를 줄인다. 또한, 시스템 고장 후 서버와 모든 클라이언트 시스템들이 병렬 처리 방식으로 각자의 T- Tree(들)를 회복하도룩 함으로서 클라이언트 개수가 많은 경우에도 신속한 회복이 가능하도록 하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.