• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5559-5564
• /
• 2015

A variety of routing protocols targeted specifically at mobile ad-hoc network environments have been developed. Mobile ad-hoc network is a self-organizing temporary network, operating without the aid of any established wired infrastructure. The proposed protocol supports seamless communication services between the mobile hosts within a mobile ad-hoc network environments. In particular, our protocol makes faster route re-establishment possible by maintaining multiple paths in each mobile host, and also, the protocol provides reliable communication environments. We compare the performance of RWP model with that of LW model. This paper shows delivery ratio with single path and non-disjoint multiple path according to mobility model and node numbers.

• Journal of Information Processing Systems
• /
• v.12 no.1
• /
• pp.57-72
• /
• 2016

To provide effective communication in the wireless mesh network (WMN), several algorithms have been proposed. Since the possibilities of numerous failures always exist during communication, resiliency has been proven to be an important aspect for WMN to recover from these failures. In general, resiliency is the diligence of the reliability and availability in network. Several types of resiliency based routing algorithms have been proposed (i.e., Resilient Multicast, ROMER, etc.). Resilient Multicast establishes a two-node disjoint path and ROMER uses a credit-based approach to provide resiliency in the network. However, these proposed approaches have some disadvantages in terms of network throughput and network congestion. Previously, the buffer based routing (BBR) approach has been proposed to overcome these disadvantages. We proved earlier that BBR is more efficient in regards to w.r.t throughput, network performance, and reliability. In this paper, we consider the node/link failure issues and analogous performance of BBR. For these items we have proposed a resilient packet transmission (RPT) algorithm as a remedy for BBR during these types of failures. We also share the comparative performance analysis of previous approaches as compared to our proposed approach. Network throughput, network congestion, and resiliency against node/link failure are particular performance metrics that are examined over different sized WMNs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2002

Path setup considering QoS is one of the main problems to solve in Internet traffic engineering. In network restoration that is one of the traffic engineering components, to establish a backup path or backup path for a working path to be protected is the main task. The backup path should have enough bandwidth to guarantee the working paths. Thus this work requires the QoS routing solution that is to set up a backup path as well as a working path at the same time provisioning enough bandwidth. In this paper, we propose an algorithm to setup a backup path that shares the bandwidth of other backup paths whose working path does not pass along the same link with the working path we are considering. In this way we can reduce much bandwidth consumption caused by setting up backup paths. We also analyze the disjoint path computation algorithms. Finally we show simulation results how the algorithm can reduce the bandwidth consumption and how it will affect blocking when we setup paths.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.218-225
• /
• 2007

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless mobile ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of any existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an extension scheme of a wireless mobile ad-hoc network based on limited multiple paths source routing protocol. This scheme reduces the overhead of route re-establishment and re-registration by maintaining link/node non-disjoint multiple paths between mobile hosts in a wireless mobile ad-hoc network or a mobile host in a wireless mobile ad-hoc network and a base station supporting fixed network services. By maintaining multiple paths, our scheme provides short end-to-end delay and is reliable extension scheme of a wireless mobile ad-hoc network to a fixed network. In this paper, our simulations show that our scheme outperforms existing schemes with regards to throughput and end-to-end delay. Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

This paper investigates the problem of protecting multicast sessions in mesh wavelength-division multiplexing (WDM) networks against single link failures, for example, a fiber cut in optical networks. First, we study the two characteristics of multicast sessions in mesh WDM networks with sparse light splitter configuration. Traditionally, a multicast tree does not contain any circles, and the first characteristic is that a multicast tree has better performance if it contains some circles. Note that a multicast tree has several branches. If a path is added between the leave nodes on different branches, the segment between them on the multicast tree is protected. Based the two characteristics, the survivable multicast sessions routing problem is formulated into an Integer Linear Programming (ILP). Then, a heuristic algorithm, named the adaptive shared segment protection (ASSP) algorithm, is proposed for multicast sessions. The ASSP algorithm need not previously identify the segments for a multicast tree. The segments are determined during the algorithm process. Comparisons are made between the ASSP and two other reported schemes, link disjoint trees (LDT) and shared disjoint paths (SDP), in terms of blocking probability and resource cost on CERNET and USNET topologies. Simulations show that the ASSP algorithm has better performance than other existing schemes.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1031-1038
• /
• 2005

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of my existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an interconnection scheme between the wireless ad-hoc network environment based on multiple path source routing protocol and a Mobile-IP based network environment. This scheme reduces the overhead of route re-establishment and re-registration by maintaining multiple paths between the mobile host in wireless ad-hoc network and the base station in mobile-IP network. Also it puts the base station in charge of function that performs translation between wireless ad-hoc network packets and Mobile-IP packets, reducing the load of mobile hosts. In this paper, our simulations show that our scheme outperforms existing interconnecting schemes with regards to throughput and end-to-end delay Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1340-1343
• /
• 2009

본 논문에서는 센서 노드의 고장에도 신뢰성있는 데이터 전송을 위해 위치 기반 k-독립경로 라우팅 알고리즘을 제안한다. 제안 라우팅 알고리즘은 센서 노드의 랜덤 고장률을 고려하여 독립경로의 수(k)를 결정하고, 구역고장으로 인한 데이터 전달률의 저하를 최소화하기 위해 노드의 위치를 바탕으로 k-독립경로를 지리적으로 분산하여 생성한다. 데이터 변동률을 이용하여 중요이벤트의 발생유무를 판단하고, 중요이벤트 발생시에는 k-독립경로를 통해 메시지를 전송함으로써 데이터 전달률을 높이고, 보통 이벤트일 때는 단일경로로 메시지를 전송함으로써 에너지 소모를 줄인다. 성능평가를 통해 제안하는 위치기반의 k-독립경올 라우팅 알고리즘은 에너지 효율이 높고, 중요이벤트의 데이터 전달률이 높음을 알 수 있었다. 특히, 구역 고장에 대해 다른 라우팅 알고리즘에 비해 훨씬 높은 견고함을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4343-4355
• /
• 2014

Multicast group communication has many advantages in data centers and thus is widely used by many applications. It can efficiently reduce the network traffic and improve the application throughput. For the multicast application in data centers, an essential problem is how to find a minimal multicast tree, which has been proved to be NP-hard. In this paper, we propose an approximation tree-building method for the minimal multicast problem, named HD（Hamming Distance）-based multicast tree. Consider that many new network structures have been proposed for data centers. We choose three representative ones, including BCube, FBFLY, and HyperX, whose topological structures can be regarded as the generalized hypercube. Given a multicast group in BCube, the HD-based method can jointly schedule the path from each of receiver to the only sender among multiple disjoint paths; hence, it can quickly construct an efficient multicast tree with the low cost. The experimental results demonstrate that our method consumes less time to construct an efficient multicast tree, while considerably reduces the cost of the multicast tree compared to the representative methods. Our approach for BCube can also be adapted to other generalized hypercube network structures for data centers after minimal modifications.