• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.295-307
• /
• 2000

Probabilistic analysis is a powerful method to quantify variability and uncertainty common in engineering geology fields. In rock slope engineering, the uncertainty and variation may be in the form of scatter in orientations and geometries of discontinuities, and also test results. However, in the deterministic analysis, the factor of safety which is used to ensure stability of rock slopes, is based on the fixed representative values for each parameter without a consideration of the scattering in data. For comparison, in the probabilistic analysis, these discontinuity parameters are considered as random variables, and therefore, the reliability and probability theories are utilized to evaluate the possibility of slope failure. Therefore, in the probabilistic analysis, the factor of safety is considered as a random variable and replaced by the probability of failure to measure the level of slope stability. In this study, the stochastic properties of discontinuity parameters are evaluated and the stability of rock slope is analyzed based on the random properties of discontinuity parameters. Then, the results between the deterministic analysis and the probabilistic analysis are compared and the differences between the two analysis methods are explained.

• Journal of Korea Trade
• /
• v.23 no.5
• /
• pp.27-44
• /
• 2019

Purpose - The purpose of this paper is to analyze the net effect of the green total factor productivity (GTFP) of China's manufacturing industry from the China-Korea Free Trade Area (China-Korea FTA) quantitatively. Design/methodology - Firstly, the Global Malmquist-Luenberger (GML) index based on the SBM directional distance function is used to measure the GTFP of China's manufacturing and analyze the driving force for its growth. Secondly, the regression discontinuity quantitative analysis is used to determine the impact of the China-Korea FTA on China's manufacturing GTFP. Findings - Our main findings can be summarized as follows: the China-Korea FTA has promoted the GTFP of China's manufacturing with an effect evaluation mainly resulting from green technology progress. And there is industry heterogeneity in the policy effect on the manufacturing GTFP due to the China-Korea FTA. Namely, policy promotion from the China-Korea FTA is more effective on the GTFP of equipment manufacturing than it is on those of other industries. Originality/value - First, an evaluation and analysis of the GTFP development of China's manufacturing that employs GML index based on SBM directional distance function. Second, a quantitative estimate of China-Korea FTA's net effect on China's manufacturing industrial GTFP that uses regression discontinuity analysis, which is considered to be the closest method to natural experiments and superior to other causal inference methods. Third, an in-depth discussion of the practical steps that China's manufacturing can take to improve GTFP development and integrate China-Korea FTA construction into economic development.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.391-395
• /
• 1997

The transmission of sound and vibration through structures is of interest in many noise control problems, including architectural acoustics, sound transmission through air craft, spacecraft and ship, and the transmission of noise through machinery and engine enclosures. Statistical Energy Analysis provides a simple and accurate method of approaching these problems. In this paper, comparing the measured coupling loss factor of plate-beam with measured coupling loss factor of mass on the junction will be inspected.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2138-2144
• /
• 1993

An integral equation representation of cracks was presented which differs from well-known "dislocation layer" representation. In this new representation, the equations are written in terms of the displacement discontinuity across the crack surfaces rather than derivatives of the displacement-discontinuity. It was shown in that the new technique is well-suited to the treatment of kinked cracks. In the present paper, this integral equation representation is coupled to the direct boundary-element method for the treatment of finite bodies containing kinked cracks. The method is demonstrated for two-dimensional finite domains but extension to three-dimensional problems would appear to be possible. The resulting approach is shown to be simple, yet very accurate. accurate.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.112-119
• /
• 2002

In this paper, an Extended Finite Element Method is proposed by adding discontinuity and singularity enrichment functions to the standard FEM approximation. In this method, the singularity and the discontinuity of the crack are efficiently modeled by using initial regular mesh without refining mesh near the crack tip, so that it enables express the asymptotic stress field near crack tip and crack surface successfully. The developed method was verified by evaluating crack tip stress profile and stress intensity factor of mode Ⅰ/mode Ⅱ fracture problems and the results showed the effectiveness and robustness for fracture problem.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10a
• /
• pp.161-184
• /
• 2001

Rock masses usually contain such features as bedding planes, faults, fissures, fractures, joints and other mechanical defects which, although formed from a wide range of geological processes, posses the common characteristics of low shear strength, negligible tensile strength and high fluid conductivity compared with the surrounding rock material. In the engineering context here, the discontinuities can be the single most important factor governing the deformability, strength and permeability of the rock mass. Moreover, a particularly large and persistent discontinuity could critically affect the stability of any surface or underground excavation. For these reasons, it is necessary to develop a thorough understanding of the geometrical, mechanical and hydrological properties of discontinuities and the way in which these will affect rock mechanics and hence rock engineering.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.145-155
• /
• 2000

Orientation data of discontinuities are of paramount importance for rock slope stability studies because they control the possibility of unstable conditions or excessive deformation. Most orientation data are collected by using linear sampling techniques, such as borehole fracture mapping and the detailed scanline method (outcrop mapping). However, these data, acquired by the above linear sampling techniques, are subjected to bias, owing to the orientation of the sampling line. Even though a weighting factor is applied to orientation data in order to reduce this bias, the bias will not be significantly reduced when certain sampling orientations are involved. That is, if the linear sampling orientation nearly parallels the discontinuity orientation, most discontinuities orientation data which are parallel to sampling line will be excluded from the survey result. This phenomenon can cause serious misinterpretation of discontinuity orientation data because critical information is omitted. In the case study, orientation data collected by using the borehole fracture mapping method (vertical scanline) were compared to those based on orientation data from the detailed scanline method (horizontal scanline). Differences in results for the two procedures revealed a concern that a representative orientation of discontinuities was not accomplished. Equal-area, polar stereo nets were used to determine the distribution of dip angles and to compare the data distribution fur the borehole method versus those for the scanline method.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.151-160
• /
• 2003

The stability of the designed rock slope is analysed based on two kinds of shear strength model. Besides the deterministic analysis, a probabilistic approach on Monte Carlo simulation is proposed to deal with the uncertain characteristics of the discontinuity and the results obtained from two models are compared to each other. To carry out the research of characteristics of the discontinuity, BIPS, DOM Scanline survey data and direct shear test data are used, and chi-square test is used for determining the probability distribution function. The rock slope is evaluated to be stable in the deterministic analysis, but in the probabilistic analysis, the probability of failure is more than 5%, so, it is considered that the rock slope is unstable. In the shear strength models, the probability of the failure based on the Mohr-Coulomb model(linear model) is higher than that of the Barton model. It is supported by the fact that the Mohr-Coulomb model is more sensitive to block size than the Barton model. In fact, there is no reliable way to estimate the unit cohesion of the Mohr-Coulomb model except f3r back analysis and in the case of small block failure in the slope, Mohr-Coulomb model may excessively evaluate the factor of the safety. So, the Barton model of which parameters are easily acquired using the geological survey is more reasonable for the stability of the studied slope. Also, the selection of the proper shear strength model is an important factor for slope failure analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.170-180
• /
• 1995

A parallel crack in bonded dissimilar orthotropic planes under out-of-plane loading is analyzed. The problem is formulated by Fourier integral transforms, and reduced to a pair of dual integral equations. By solving the integral equations, the asymptotic stress and displacement fields near the crack tip are determined in closed form, from which the stress intensity factor and energy release rate are obtained. Discontinuity in the stress intensity factor as the distance ratio h/a of the parallel crack approaches zero is found, while the energy releas rate is shown to be continuous at h/a = 0. This information can immediately be used to generate the stress intensity factor for the parallel crack near the interface. By employing "the maximum energy release rate criterion", it could be shown in the case of no existing crack initially that the parallel crack is formed far from the interface for the more compliant material, while it is formed close to the interface for the stiffer material. material.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1299-1309
• /
• 1998

In this paper, we propose a new approach for reducing the blocking artifact that is one of drawbacks of the block-based Discrete Cosine Transform (DCT) without introducing additional information or significant blurring. We modify the inter-block discontinuity minimization technique to preserve edges within a block as well as to reduce visible block boundaries. The homogeneity of each block is decided by the threshold value reated to Q-factor, which is included in a JPEG as well as MPEG streams. The quantization error is estimated by minimizing the discontinuity, which is weighted in proportion to block discontinuity and added to each pixel in the block to compensate block artifacts. The proposed algorithm reconstructs images which have less noticeable block boundaries from a subjective viewpoit without anyconstraints.