• 전기학회논문지
• /
• 제58권10호
• /
• pp.2005-2010
• /
• 2009

Water droplet ejection characteristics of a point-to-plate airgap, with a wet porous point as a corona electrode, has been investigated. And the water droplet traces, charge, mass and number were measured experimentally. More particles are observed with wet porous point than metal point because the corona-discharging wet porous point can eject a number of water droplets. The water droplets ejected from the positive-corona-discharging wet porous point showed very fine traces as compared with those from the negative-corona-discharging wet porous point. Moreover, the water droplets ejected from the AC-corona-discharging wet porous point showed granular-like larger traces. It was shown that the weak corona discharge can eject smaller water droplets with larger ratio of mass-to-charge than the intense corona discharge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1146-1148
• /
• 2007

This paper proposes a method to improve the charging speed and discharging performance of a high voltage capacitor used in a portable medical device. The improvement of the charging speed was achieved by duty cycle control. The discharging performance was carried out by varying the phase duration and the leading edge voltage of the output according to the transthoracic impdedance of the patient. As a result, the improvement in the charging speed and the performance of the discharging parameters shorten the patient treatment time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2187-2189
• /
• 2001

The proposed algorithm has produced the rules of relationship between the load voltage, current, discharging electric power and ampere-hours, electric power capacity of battery on the basis of the data. Which were acquired through the battery discharging experiment that is defined by the battery's ambient temperature and various load conditions. Especially, by calculating the parameter of second order polynomial equation relation between the remaining capacity and the electric power, the algorithm is proposed adapting for the discharging pattern. And as the depth of discharging is increasing, the calculation-method of electric power is applied to decrease the accumulated error in the calculation method of capacity accumulation. Also, the proposed algorithm has compensated the temperature considering the capacity change of battery to the temperature.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.431-437
• /
• 2022

This study proposes a converter that makes battery charging, discharging, and zero voltage control possible. The proposed topology consists of an LLC converter and a half-bridge inverter, and all power semiconductor devices are applied Si-MOSFETs. The topology is designed with an LLC switching frequency of 100 kHz, a half-bridge inverter switching frequency of 50 kHz, and a battery voltage of 5 V. The advantages of the charging/discharging operation of the 5 V battery voltage and the zero voltage control of the battery are verified. In addition, by using a two-stage topology, the battery can be charged, discharged through current control, and discharged to zero voltage. With the proposed topology, the current can be maintained even when the battery voltage drops to zero.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.8-17
• /
• 2008

본 논문에서는 선박용 HID조명의 방전 개시전압을 조절함으로써 초기 방전전류를 억제하여, HID조명의 안정적인 점등이 가능한 제어방식을 제안하였다. 제안된 제어 방식은 방전 대기전압까지 출력전압을 상승시킨 후, 충전전압의 저항부하 방전을 통하여 전압을 감소시키면서, 설계된 방전개시전압시점에서 이그니터를 점화하여 방전 개시 전류를 제한한다. 방전 후 정상상태에서는 정전류 제어로 조도를 제어하게 된다. 제안된 방식은 별도의 전압제어기를 포함하지 않으면서도, 방전개시 시점을 조절할 수 있으므로, 초기 방전 전류를 크게 제한할 수 있으므로, 안정적인 점등과 조명의 수명을 확대할 수 있는 장점이 있다. 또한 조명의 이상상태를 간단한 이상검출 회로를 통하여 순시적으로 감시하여 전체 시스템의 보호 성능을 개선하였다. 제안된 제어기는 실제 선박용 2.5[kW]급의 HID 탐사조명에 대한 실험을 통하여 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.931-932
• /
• 2010

• 에너지공학
• /
• 제29권3호
• /
• pp.64-73
• /
• 2020

본 논문은 전기 자동차의 충·방전 장소를 고려한 도시별 일부하 곡선 산출을 위한 방법론을 제시하였다. 즉, 특정 도시에서 전기 자동차 충·방전에 의해 발생되는 부하량이 전력 그리드에 미치는 영향을 용이하게 파악할 수 있도록 전기 자동차의 충·방전 장소를 고려한 도시별 일부하 곡선 산출 알고리즘을 제시하였다. 구체적으로는 PEVs 점유율 시나리오에 따라 도시내의 전기차 충·방전 장소별 즉, 직장 및 가정에 대하여 오전에 직장에 도착한 전기차에 대해 그리드에 방전을 그리고 오후에 가정에 도착한 전기차에 대해 충전을 시행하는 가정을 수립한 후 오전 직장 도착 차량운행 특성과 SMP 요금제를 동시에 반영한 PEVs 방전 전력을 산정하였다. 그리고 오후에 가정 도착 차량운행 특성과 TOU 요금제를 동시에 고려한 PEVs충전 전략에 대해 각각 서울시를 대상으로 충·방전 전력 형태별로 일부하곡선을 산출한 후 기존 부하와 합산하여 그리드에 미치는 영향 평가를 비교 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.458-462
• /
• 2004

The hydraulic system for discharging compressed gas is composed of compressor tank, proportional flow control servo valve, expulsion spool valve and discharging tube. Purpose of this study is to control of expulsion spool valve. First, we analyzed the hydraulic system. The flow control servo valve is modeled as a 2nd order transfer function and friction force of the expulsion spool valve is modeled as nonlinear model with stribeck effect. However, it is difficult to include the flow reaction force in modeling. So, we exchanged from the simplified flow reaction force of the compressed gas affection into the flow analysis code written in FORTRAN code. Our simulation of the oil pressure system for discharging gas used MATLAB/Simulink. So, we realized ＆apos;Level -2 S-Function Fortran＆apos; to cooperate for MATLAB/Simulink and FORTRAN code. PD controller is selected to control in this system. Simulation results show that with given conditions the controllers give a good tracking performance.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1211-1222
• /
• 2018

This study presents a power distribution control scheme for a three-phase interleaved parallel DC/DC converter in a battery energy storage system. To extend battery life and increase the power equalization rate, a control method based on the nth order of the state of charge (SoC) is proposed for the charging and discharging processes. In the discharging process, the battery sets with high SoC deliver more power, whereas those with low SoC deliver less power. Therefore, the SoC between each battery set gradually decreases. However, in the two-stage charging process, the battery sets with high SoC absorb less power, and thus, a power correction algorithm is proposed to prevent the power of each particular battery set from exceeding its rated power. In the simulation performed with MATLAB/Simulink, results show that the proposed scheme can rapidly and effectively control the power distribution of the battery sets in the charging and discharging processes.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.316-323
• /
• 1995

A vital step in magnetic tape manufacturing is the surface modification of polymer substrate prior to ink application. A critical element for good adhesion of magnetic ink on polymeric substrate is the ability to join ink in cost-effective manner. Corona discharging is one of the effective methods of modifying polymer surface to improve adhesion while maintaining the desirable properties of the film itself. Surface treatment by corona which is exposure of film surface to electron or ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and/or introducing reactive chemical groups. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission be avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polymer substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle measurements.