• 대한전기학회논문지
• /
• 제38권6호
• /
• pp.470-476
• /
• 1989

In order to develop a mathematical model which can predict the operating voltage and current of a discharge lamp, the properties and the physical phenomena of a low pressure gas discharge are investigated. Fluorescent lamp which uses a low pressure mercury-argon gas discharge is used in the model development. In a low pressure mercur-argon gas discharge, the continuity equation for each excited atom and electron, and the electron energy balance equation can predict the physical quantities of discharge. By coupling these equations and the circuit equation, the electrical characteristics of the discharge lamp can be predicted. To verify the validity of the suggested model, we calculated the voltage and current of a fluorescent lamp operating with inductor ballast for source frequency of 5KHz, 8KHz, 10KHz, and 13KHz. The results show good agreements in wave forms between the measured voltage and current, and the difference between the measured and calculated one is less than 5%.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.482-489
• /
• 2002

본 연구는 PV모듈, 밧데리, 충·방전시스템 등으로 구성된 태양광 가로등을 대상으로 소규모 독립형 태양광 발전 시스템(SPVS)을 연구하였다. 태양전지의 발전 효율을 증가시키고 밧데리를 효율적으로 사용할 수 있도록 하기 위해 병렬로 연결된 밧데리를 개별적으로 제어할 수 있는 시스템을 제안하였다. 제안된 시스템은 기존의 방식에 비해 밧데리 충전효율이 증가되고 충방전 횟수를 50%정도 감소시킬 수 있다. 또한 병렬 연결된 전지를 개별적으로 충전 혹은 방전 모드로 제어함으로서 일부 밧데리 고장시에도 일정기간 동안은 정상동작이 가능하고, 밧데리의 고장이 정상적인 밧데리로 전이되는 것을 예방할 수 있어 시스템 유지 보수비용을 줄일 수 있어 태양광 가로등에 적용할 경우 비용절감이 가능할 것으로 예상된다.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.31-40
• /
• 2011

This study was conducted to research how UCD(Ultra Constant Discharge) lamp lighting affects plant cultivation. To get the results within a short time, lettuce seedling was selected as a plant and nutrient hydroponic beds were used in a dark room for 100% artificial lighting. Two beds were installed for same distance lighting condition with UCD lamp and Hi-pressure Sodium lamp each and another two beds were installed for same light intensity condition with each type of lamp. After 15 days of cultivation, for both conditions, the yields under UCD lamp were weighed more than that under Hi-pressure Sodium lamp. The result can be analyzed that the spectrum of UCD lamp having near sunlight characteristic is much superior to that of Hi-pressure Sodium lamp having a line spectrum characteristic on yellow and red wavelengths for plant cultivation.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.214-220
• /
• 2010

This paper presents the results of a study on an electrodeless high intensity discharge (HID) lamp system that is powered by circularly polarized microwaves (CPMs). The technique to generate CPMs enables an electrodeless high intensity discharge lamp to be turned on without the retation of the bulb but conventional electrodeless high intensity discharge lamps use rotating bulbs in order to prevent a puncture in a hot spots that are formed by the linearly polarized microwaves in the circular cavity. The technique to generate CPMs is described and the salient features of the lamp characteristics are presented.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.50-54
• /
• 2006

The study on discharge of the flat lamp lighting source has been requested increasingly. To improve the brightness, life time and efficiency of flat lamp, the plasma diagnosis of flat lamp lighting source is very important. When a distance of discharge electrode is 5.5mm and width is 16.5mm, we measured electron temperature and electron density with single Langmuir probe in flat lamp. Pressure conditions to test the plasma discharge from 100 Torr to 300 Torr. The power supply was PDS-4000 with frequency 20kHz and duty ratio $20\%.$ Form these experimental results, electron temperature was decreased according to increase the gas pressure and the voltage while electron density was increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.71-74
• /
• 2006

Discharge of the flat lamp lighting source research arc requested very much. For improving brightness, life time, efficiency of flat lamp, plasma diagnosis of the flat lamp lighting source to understand property of lighting source is very important. distance of discharge electrode is 5.5mm and width is 16.5mm, we measured electron temperature and electron density measured with single langmuir probe in flat lamp. we tested the discharge from 100 Torr to 300 Torr pressure. the Pulse is rectangular pulse with frequency 20kHz and Duty ratio 20%. Resultly, electron temperature decreases and electron density increase as increase the gas pressure and electron temperature decreases and electron density increase as increase the voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.527-530
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generate from gas discharge and powder type electrolyminescent display(P-ELD) using a phenomenon of the light emission eaused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.379-382
• /
• 2000

The characteristics of Xe discharge lamp(Mercuryless lamp) are described in this paper. In this paper, FFL is operated by sine wave and pulsed source. We apply V-Q Lissajous' figure for the discharge measurements of FFL which has the electrodes covered with dielectric. When FFL is operated by sine wave source, the characteristics are similar to DBD(Dielectric Barrier Discharge) and SD(Silent Discharge). And we compared the characteristics of FFL which is operated with sine wave and pulsed discharge by using V-Q Lissajous' figure method. When FFL is operated with pulsed, the discharge current flows after the applied voltage is risen. As the duty ratio increases the electric field becomes strong and much more xenon ions are produced. And the number of metastable xenon atoms seem to increase, therefore, the phosphor radiation after the cut off of voltage increases compared with the first peak of radiation. Consequently, the 172㎚ radiation becomes strong as the duty ratio increases.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.8-17
• /
• 2008

본 논문에서는 선박용 HID조명의 방전 개시전압을 조절함으로써 초기 방전전류를 억제하여, HID조명의 안정적인 점등이 가능한 제어방식을 제안하였다. 제안된 제어 방식은 방전 대기전압까지 출력전압을 상승시킨 후, 충전전압의 저항부하 방전을 통하여 전압을 감소시키면서, 설계된 방전개시전압시점에서 이그니터를 점화하여 방전 개시 전류를 제한한다. 방전 후 정상상태에서는 정전류 제어로 조도를 제어하게 된다. 제안된 방식은 별도의 전압제어기를 포함하지 않으면서도, 방전개시 시점을 조절할 수 있으므로, 초기 방전 전류를 크게 제한할 수 있으므로, 안정적인 점등과 조명의 수명을 확대할 수 있는 장점이 있다. 또한 조명의 이상상태를 간단한 이상검출 회로를 통하여 순시적으로 감시하여 전체 시스템의 보호 성능을 개선하였다. 제안된 제어기는 실제 선박용 2.5[kW]급의 HID 탐사조명에 대한 실험을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.206-209
• /
• 2006

At present, the cold cathode fluorescent lamp (CCFL) using mercury lamp has been generally used far liquid crystal backlight source of personal computer and car navigation and so on. This kind of lamp is more excellent on luminance performance and cost. However, the requirements of liquid crystal backlight due to a light source without mercury have been strongly increased from a viewpoint of the actual influence on environmental preservation and environmental recycling. As fluorescent lamp without mercury, Dielectric Barrier Discharge based rare gas fluorescent lamp (DBD-FL) using xenon (Xe) gas has been studied so far. This DBD lamp has no influence on the human body and environmental recycle. Its operating life is long because electrode is out. In this paper, the simulation and experimental results of soft switching high frequency inverter with reverse blocking single switch as a high frequency power supply circuit for DBD-FL using Xe gas are comparatively evaluated and discussed from a practical point of view.