• 한국분무공학회지
• /
• 제25권3호
• /
• pp.95-102
• /
• 2020

Six shear coaxial injectors for a 3 tonf-class liquid rocket engine using oxygen and methane as propellants were designed and manufactured by considering geometric design parameters such as a recess length and a taper angle. Cold-flow tests on the injectors were performed using water and air as simulants. By changing the water mass flow rate and air mass flow rate, the injection pressure drop under single-injection and bi-injection was measured. The discharge coefficients through the injector oxidizer-side and fuel-side were calculated and the discharge coefficient ratio between bi-injection and single-injection was obtained. Under single-injection, the recess served to reduce the injection pressure drop on the injector fuel-side. For the injectors without recess, the discharge coefficients under bi-injection were almost the same as those under single-injection. However, for the injectors with recess, the taper angle and bi-injection had a significant effect on the discharge coefficient.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1371-1379
• /
• 1997

The high pressure drop is frequently required in the by-pass line of the pump or of the heat exchanger in power plants. However, cavitation produced by a high pressure drop could damage the pipe and pump blades. Conical orifices are adopted to reduce cavitation due to high pressure drop. The discharge coefficients of conical orifice plates were measured by weighing method in the standard water flow system. The discharge coefficients were larger when the ratios of thickness of orifice edge to throat diameter were larger. The noise generated from a conical orifice due to cavitation was measured with a sound level meter and a hydrophone. With increasing the bore diameter of the orifice, the sound pressure level or the noise level due to cavitation became higher. The noise level was suddenly increased at the inception of cavitation.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.551-560
• /
• 2001

낙동강의 화원-교령교-현풍 수위관측소 구간에 대하여 수리학적 하도추적을 통하여 조도계수를 추정하였다. 세 관측소의 연속 수위자료와 하천 종횡단 측량자료만이 이에 사용되었다. 하도추적에 의해 계산된 유량자료로부터 수위-유량 관계식을 작성하였으며 이는 기존의 수위-유량 관계식보다 나은 결과를 보였다. 수위측정 오차가 유량계산에 미치는 영향에 대하여 분석하였으며, 측방유입류를 억제할 수 있도록 하도길이를 제한하는 방법도 제시하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.73-76
• /
• 2011

축소형 가스발생기를 제작하여 연소시험을 성공적으로 수행하였으며 분사기의 형상 변화에 따른 유량계수의 영향을 파악하였다. 연소시험 결과 연료 및 산화제 분사기의 유량계수는 혼합비와 연소압에 상관없이 거의 일정하였으며, 특히 산화제 분사기의 유량계수는 이전 결과보다 크게 향상되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.852-856
• /
• 2011

The lithium ion diffusion coefficients of bare, carbon-coated and Cr-doped $LiFePO_4$ were obtained by fitting the discharge curves of each half cell with Li metal anode. Diffusion losses at discharge curves were acquired with experiment data and fitted to equations. Theoretically fitted equations showed good agreement with experimental results. Moreover, theoretical equations are able to predict lithium diffusion coefficient and discharge curves at various discharge rates. The obtained diffusion coefficients were similar to the true diffusion coefficient of phase transformation electrodes. Lithium ion diffusion is one of main factors that determine voltage drop in a half cell with $LiFePO_4$ cathode and Li metal anode. The high diffusion coefficient of carbon-coated and Cr-doped $LiFePO_4$ resulted in better performance at the discharge process. The performance at high discharge rate was improved much as diffusion coefficient increased.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.162-168
• /
• 2006

Recently, diagnosis techniques have been investigated to detect a Partial Discharge associated with a dielectric material defect in a high voltage electrical apparatus, However, the properties of detection technique of Partial Discharge aren't completely understood because the physical process of Partial Discharge. Therefore, this paper analyzes the process on surface discharge of polymer insulator using wavelet transform. Wavelet transform provides a direct quantitative measure of spectral content in the time~frequency domain. As it is important to develop a non-contact method for detecting the kaolin contamination degree, this research analyzes the electromagnetic waves emitted from Partial Discharge using wavelet transform. This result experimentally shows the process of Partial Discharge as a two-dimensional distribution in the time-frequency domain. Feature extraction parameter namely, maximum and average of wavelet coefficients values, wavelet coefficients value at the point of $95\%$ in a histogram and number of maximum wavelet coefficient have used electromagnetic wave signals as input signals in the preprocessing process of neural networks in order to identify kaolin contamination rates. As result, root sum square error was produced by the test with a learning of neural networks obtained 0.00828.

• 한국수자원학회논문집
• /
• 제43권6호
• /
• pp.525-531
• /
• 2010

본 연구에서는 De Marchi 유량계수 개념을 이용하여 상대적으로 폭이 넓은 개수로에서 광정횡월류위어 유량계수에 대한 위어 상류단 프루드수($Fr_1$), 위어 높이(h), 위어 길이(L), 위어 폭(W), 본류 폭(B)의 영향 및 예언횡월류위어의 유량계수와 광정횡월류위어의 유량계수의 상관성을 실험적으로 확인하였다. 분석 결과 폭이 넓은 개수로 흐름 조건에서는 본류 흐름 조건의 영향이 약화되고 위어 자체의 기하학적 형상에 의한 영향이 강화되기 때문에 예연횡월류위어와 광정횡월류위어 유량계수의 상호연관성이 상대적으로 약화되는 것으로 나타났으며, 차원해석을 통하여 $Fr_1$, h/$y_1$, L/B, W/($y_1-h$) 등 4개의 변수가 영향이 큰 것을 확인하였다. 그리고 실험 결과를 바탕으로 회귀분석을 통하여 새로운 광정횡월류위어 유량계수 산정식을 제안하였다.

• 한국수자원학회논문집
• /
• 제40권1호
• /
• pp.51-62
• /
• 2007

횡월류위어의 월류량을 산정하기 위해서는 횡월류위어의 흐름특성을 분석하고 유량계수를 산정하는 것이 필요하다. 본 연구에서는 수리실험을 통하여 직사각형, 삼각형 횡월류위어에 대하여 본류의 Froude 수, 횡월류위어의 폭, 위어정각 등의 형상변화에 따른 유량계수를 산정하였다. 횡월류위어의 유량계수는 횡월류위어의 형상 및 기하학적 조건과 본류의 Froude수에 따라 변하는 것으로 나타났다. 다중 회귀분석을 통하여 직사각형과 삼각형 횡월류위어의 유량계수식을 제시하였으며, 측정된 월류량과의 비교 분석을 통해 적용성을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.652-657
• /
• 2001

Computational work using the axisymmetric, compressible, Navier-Stokes Equations is carried out to predict the discharge coefficient of mass flow through a micro-critical nozzle. Several kinds of turbulence models and wall functions are employed to validate the computational predictions. The computed results are compared with the previous experimented ones. The present computations predict the experimental discharge coefficients with a reasonable accuracy. It is found that the standard $k-\varepsilon$ turbulence model with the standard wall function gives a best prediction of the discharge coefficients. The displacement thickness of the nozzle wall boundary layer is evaluated at the nozzle throat and is well compared to a prediction obtained by an empirical equation. The resulting displacement thickness of the wall boundary layer is about 2% to 0.6% of the diameter of the nozzle throat for the Reynolds numbers of 2000 to 20000.

• 한국분무공학회지
• /
• 제22권4호
• /
• pp.159-168
• /
• 2017

Numerical studies on the spray characteristics of closed-type and open-type swirl injectors were conducted using ANSYS Fluent. By changing injection pressures, discharge coefficient and spray angle were calculated using the Reynolds stress BSL turbulent model. The numerical results were compared with previous experimental data to examine their accuracy. For a closed-type swirl injector, spray angles matched well with experimental results and discharge coefficients showed approximately 8% differences. On the contrary, discharge coefficients of an open-type swirl injector were similar with experimental result but its spray angles presented around 15% differences. Though the numerical results were not perfectly consistent with experimental data, it is thought that they could be sufficiently used for analyzing spray characteristics, specially which is hard to be measured from experiments. Numerical simulation with different turbulent models was also performed to examine their effects on the numerical results.