• Food Science of Animal Resources
• /
• v.36 no.3
• /
• pp.421-426
• /
• 2016

Polylactic acid (PLA) is a biodegradable and renewable polymer, which represents a valuable alternative to plastic packaging films, often associated with environmental problems. In this study, we tested the suitability of PLA as a biodegradable packaging film and assessed the antimicrobial activity of lemongrass oil (LO), incorporated into the PLA film in different concentrations. To obtain the optimal physical properties for PLA films, tensile strength, elongation at break, and water vapor permeability were measured under different preparation conditions. In addition, the antimicrobial activity of the LO contained in the PLA film against Listeria monocytogenes was investigated by disc diffusion and viable cell count. Among all concentrations tested, 2% LO was the most suitable in terms of antimicrobial activity and physical properties of the PLA film. Based on these results, we used the PLA film containing 2% LO to pack pork sausages; after 12 d of storage at 4℃, the population of inoculated L. monocytogenes in the sausage samples wrapped with the PLA film containing 2% LO was reduced by 1.47 Log CFU/g compared with the control samples. Our data indicate that PLA films containing 2% LO represent a valuable means for antimicrobial sausage packaging.

• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.11-26
• /
• 1997

Through the Korea-Germany joint project, a novel method, that is, an optical Corescanner (Stereophotogramrnetry) of acquisition, evaluation and display of struct-ural elements of drill cores has heen realized. AH scannable cores can he digitally stored on a storage device(dat tape, optical disc etc.) and available for further an-alysis using diverse software facilities. The use of this scanning technique was d-emonstrated on the cores derived from the metamorphosed sedimentary rocks in our country. Recent studies showed a great potential of using the Corescanner with high resolution not only for avoiding ambiguities of drill log interpretation due to the capability of accurate quantative analysis of structural elements, but also for replacing the cores themselves as a data-base one via completely copying of the core outlook.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.1057-1065
• /
• 2002

The antagonistic activities of 30 strains of lactobacilli against Helicobacter pylori were determined and Lactobacillus helveticus CU631 has been selected as the strain which possesses the strongest inhibitory effect in the disc diffusion assay showing inhibition zone diameter of $10{\pm}1.5mm$, whereas those of L. plantarum and L. fermentum have been shown to be $4.0{\pm}0.6mm$. H. pylori G88016 revealed the highest vacuolating toxin producing activity among the 8 strains, the inhibitory activity of L. helveticus CU631 in vacuolating toxin producing activity of H. pylori manifested in the co-culture of two strains and in the 5:5 mixture of supernatant of the two strains. Both L. helveticus CU631 and cell free culture supernatant had a strong inhibitory activities in urease and cytotoxin producing activities of H. pylori NCTC11637 and CJH12. An accelerated proteolytic activity of water soluble peptides by L. helveticus CU631 during the refrigeration storage has been manifested in the cream cheese. DNA seqences of 16S-23S ribosomal RNA spacer region showed typical pattern among the various strains of L. helveticus, which could be used in the identification of L. helveticus CU 631.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.2
• /
• pp.158-164
• /
• 1986

Polyphenol oxidase in apple (Golden Delicious) was extracted, partially purified and its properties were found as follows; Polyphenol oxidase showed optimum pH for activity at 6.5 and optimum temperature at $30^{\circ}C$ and high affinity to o-diphenol compounds. Cysteine, ascorbic acid and sodium metabisulfite appeared to be most effective inhibitors. EDTA showed a slight inhibition. During the enzyme was kept in test tube at $4^{\circ}C\;and\;20^{\circ}C$ for a week, polyphenol oxidase activity decreased sharply during the first four days at $20^{\circ}C$, then decreased slowly as the storage was prolonged. At $4^{\circ}C$, the polyphenol oxidase activity appeared to be relatively stable during the first two days before activity began to decline sharply. Polyacrylamide disc gel electrophoresis indicated four bands with polyphenol oxidase activity. Three bands and one band of the active bands were observed after heating for 1hr at $60^{\circ}C\;and\;70^{\circ}C$ respectively. The enzyme activity was observed 40% after treatment at $60^{\circ}C$ and 5% after treatment at $70^{\circ}C$. Therefore, no difference in the thermal stability was observed between active bands and the enzyme activity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.203-206
• /
• 2004

For the realization of PRAM, $Ge_2Sb_2Te_5$ (GST) has been employed for the phase transition between the crystal and amorphous states by electrical joule heating. Although there has been a vast amount of results concerning the GST in material aspect for the laser-induced optical storage disc applications, the process-related issues of GST for the PRAM applications have not been reported. In this work, the etching behaviors of GST were investigated when the processing conditions were varied in the high-density helicon plasma. The etching parameters of RF main power, RF bias power, and chamber pressure were fixed at 600 W, 150 W, and 5 mTorr, respectively. For the etching processes, gas mixtures of $Ar/Cl_2$, $Ar/CF_4$, and $Ar/CHF_3$ were employed, in which the etching rates and etching selectivities of GST thin film in given gas mixtures were evaluated. From obtained results, it is found that we can arbitrarily design the etching process according to given cell structures and material combinations for PRAM cell fabrications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.18-24
• /
• 2010

A correct and accurate model of optical data storage systems is very important in development and performance evaluation of various data detection algorithms. In this paper, we present an nonlinear modeling scheme of a super-resolution near-field structure (Super-RENS) read-out signal using the canonical piecewise-linear (PWL) and the second-order Volterra models. Nonlinear equalizers may be developed on the basis of the information obtained from this nonlinear modeling. To mitigate the nonlinear inter-symbol interference (ISI), we proposed a new nonlinear equalizer for Super-RENS discs. Its validity is tested with the RF signal samples obtained from a Super-RENS disc. The experiment results verified the possibility that the canonical PWL and the second-older Volterra models can be utilized for nonlinear modeling of Super-RENS systems. The proposed equalizers are superior to the one without equalization in terms of bit error rate (BER).

• Korean Journal of Food Science and Technology
• /
• v.2 no.2
• /
• pp.38-42
• /
• 1970

The crude enzyme, tamylase, was produced by cultivating the Bacillus subtilis on wheat bran. It is composed of amylase and protease, and can be used as an additive material to the synthetic detergent, Suny which is manufactured by Ae-kyung Oil and Fat Co. Amylase activity of the enzyme as an additive material to the synthetic detergent; 1. is decreased by increasing the amount of detergent. But inhibitory rate under the practical used concentration of detergent is less than ten percents. 2. have optimal temperature at $ 40^{\circ}C$. 3. have optimal pH of substrate on pH $5{\sim}6.5$. 4. is inhibited by $Fe^{+++}$. When enzyme and detergent are mixed both as powder, the enzyme is good for storage. Proteolytic activity is good at the practical used concentration of the detergent, but it is inhibited by strong concentration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1984

The tools and techniques for measuring the spectral distribution of light emitted by, transmitted by, or reflected from food surfaces are described for determining the extent to which original natural color is preserved in processing and subsequent storage of foods. Color differences may be evaluated indirectly in terms of some physical characteristic of the sample or extracted fraction thereof that is largely responsible for the color characteristics. For evaluation more directly in terms of what the observer actually seen, color differences are measured by reflectance spectrophotometry and photoelectric colorimetry and expressed as differences in psychophysical indexes such as luminous reflectance and chromaticity. The standard system, against which other systems could be compared, is the one recommended by the International Committee on illumination and which is based on the 'standard observer', which is a simulated standard eye, consisting of three primary color filters Z, with X being essentially amber in color, Y, green and Z, blue. Any spectrophotometric curve of reflectance obtained from the surface of an object can be integrated in terms of X, Y and Z. Psychophysical notation may be converted by standard methods to the colorimetrically more descriptive terms of Munsell hue, value and chroma.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.75-83
• /
• 2013

PURPOSE. Maxillofacial silicone elastomer is usually colored intrinsically with color pigments to match skin colors. The purpose of this study was to investigate the color stability of a maxillofacial silicone elastomer, colored with a thermochromic, color changing pigment. MATERIALS AND METHODS. Disc-shaped maxillofacial silicone specimens were prepared and divided into 3 groups: a conventionally colored control group, one group additionally colored with 0.2 wt% thermochromic pigment, and one group with 0.6 wt% thermochromic pigment. Half of the surface of each specimen was covered with an aluminium foil. All of the specimens were exposed to UV radiation in 6 hour cycles over 46 days. In between the UV exposures, half of the specimens were stored in darkness, at room temperature, and the other half was stored in an incubator, at a humidity of 97% and a temperature of $+37^{\circ}C$. Color measurements were made with a spectrophotometer and registered according to the CIELAB $L^*a^*b^*$ color model system. The changes in $L^*$, $a^*$ and $b^*$ values during artificial aging were statistically analyzed by using paired samples t-test and repeated measures ANOVA. P-values <.05 were considered as statistically significant. RESULTS. The UV exposure resulted in visually noticeable and statistically significant color changes in the $L^*$, $a^*$ and $b^*$ values in both of the test groups containing thermochromic pigment. Storage in the incubator lead to statistically significant color changes in the $a^*$ and $b^*$ values of the specimens containing thermochromic pigment, compared to those stored at room temperature. CONCLUSION. The specimens containing thermochromic pigment were very sensitive to UV radiation, and the thermochromic pigment is not suitable, as such, to be used in maxillofacial prostheses.