• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.666-669
• /
• 2011

The rupture disc shapes of bulkhead type pulse separation device(PSD) are designed for new dual pulse rocket motor. Before final design PSD, that three different rupture disc are tested and confirmed the performance of the discs. Through analyzing the test results the PSD decides, two rupture disc shapes with flow holes of eight circles and eight trapezoids.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.1
• /
• pp.62-66
• /
• 2012

The authors report 2 cases of nerve root herniation after discectomy of a large lumbar disc herniation caused by an unrecognized dural tear. Patients complained of the abrupt onset of radiating pain after lumbar discectomy. Magnetic resonance imaging showed cerebrospinal fluid signal in the disc space and nerve root displacement into the disc space. Symptoms improved after the herniated nerve root was repositioned. Clinical symptoms and suggestive radiologic image findings are important for early diagnosis and treatment.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.2
• /
• pp.144-146
• /
• 2005

Herein, a case of missed upper lumbar disc herniation, diagnosed by thorough neurological examination, digital infrared thermographic imaging[DITI], and repeated magnetic resonance[MR] image study, is reported. A 36-year-old female presented with intractable leg pain on left anterior thigh. Although she underwent lumbar MR image at other hospital, she was misdiagnosed as acute sprain. Neurological examination suggested the possibility of upper lumbar disc herniation, which was confirmed by DITI, MRI, and selective root block. After operation, her leg pain was significantly improved. It should be considered that upper lumbar disc herniation might be misdiagnosed as an acute sprain, as in our case. A high index of suspicion based on thorough neurological examination is most important in such cases. Then, multi-access such as DITI, MR image, and selective block, base on thorough neurological examination, are warranted.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.97-107
• /
• 1998

Three different kinds of brake discs including two coated brake discs and one steel disc were tested under the same experimental conditions on a reduced scale braking test bench. Braking test bench was specially designed to analyse thermo-mechanical and frictional behaviors of two sizes of brake discs in stop and hold braking modes. And Plasma spray coating technique was used to coat ceramic powder on the discs. In the test four commercial brake pads were coupled with discs. Ceramic coated discs had shown good stability in friction coefficient at high speed and high energy braking conditions. But they caused large pad mass wear loss compared with the steel disc. It was shown that thermal barrier effect in ceramic coated discs adjusted the thermal partition between pad and disc. For a steel disc, it had shown fluctuating friction coefficient at high speed but a fittie pad mass wear loss compared with ceramic coated discs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.234-238
• /
• 2006

In this research, an analysis of damaged instance and forming fault for disc part in automotive steel wheel was performed. Rolled steel material, which had been used in the manufacturing of the damaged disc part, was prepared for tensile test, quantitative analysis of chemical component and acquirement of scanning electron microscope images. Although the results of mechanical properties and chemical component ratio for the material satisfied the suggested specification, some material inherent problem was found in the scanning electron microscope images. Finally, in an analysis of chemical component for the damaged disc part used in road condition, mismatching of chemical component ratio between the suggested specification and test result was found.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.624-631
• /
• 2005

A note-book PC has become thinner in recent years, which requires the optical disc drives with small height and high memory capacity. Therefore the actuator of optical disc drives must be thinner and have disc tilt compensation function for high density memory. In this paper, the actuator with hybrid type is investigated for 3-axis ultra-slim actuator. A 3-axis ultra-slim actuator is designed by using the modal analysis of the actuator and the electromagnetic analysis of magnetic circuit to achieve dynamic characteristics. Also, magnetic force between tilt magnet and tilt yoke is investigated to and the influence on the DC sensitivity in the focus and track directions.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1621-1626
• /
• 2003

This study deals with the heat transfer analysis on phase change optical disc with land/groove recording by means of numerical method. Finite difference time domain(FDTD) method was used to obtain the amount of absorption of light propagating inside disc and finite difference element(FEM) method was used to calculate the temperature distribution. The calculated results present the detailed information of recording characteristics on the phase change optical disc. The temperature profiles are quite different between the land track and the groove track. The recorded mark shape on land track is smaller and more elliptic than that on groove track. It is shown that the thermal problem to the neighboring track takes place due to secondary peaks. It is found that the different write strategy should be applied to land and groove recording, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.874-875
• /
• 2008

Gap servo NFR (Near Field Recording) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve high NA, SIL (Solid Immersion Lens) is used. In case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. To develop NFR disc drive with very small gap distance between SIL bottom and the surface of media, we need to research for the vibration characteristics and design considerations. This paper deals with a study on vibration characteristic of NFR disc drive.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.560-563
• /
• 1998

For the next generation railway brake system, a disc brake which can be operated directly and electrically is strongly expected. This paper deals with newly developed disc brake actuator using giant magnetostrictive materials(GMM) which can be integrated with disc brake. Regarding the brake system performance, a better delay time was also attained which can be integrated with disc brake. Regarding the brake system performance, a better delay time was also attained which will contribute to shorten a stopping distance.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.42-47
• /
• 2005

We developed an optical pickup system which is used fer Blu-ray Disc. A liquid crystal element was used to make compensation for spherical aberration. Spherical aberration is a difficult problem in the optical pickup system for Blu-ray Disc. To reduce the effects of wavelength variation from the laser source, we designed a diffraction optical element. We took a measurement of all of the parts used to make a pickup system and validated the performance of each part. Then, we made a performance test fur the optical pickup system which we developed for Blu-ray Disc and the results were satisfactory.