• 항공우주기술
• /
• 제11권2호
• /
• pp.208-215
• /
• 2012

우주발사체 비행에 의한 발사장 주변의 음향 소음에 대하여 분석하였다. 발사체 엔진 배기 제트에 소음원을 위치시키고 소음의 방향성, 대기 감쇄 등을 고려하여 발사장 주변의 특정 지점에 미치는 소음의 크기를 예측하였다. KSLV-I의 발사 소음을 예측하고 이 결과를 비행시험시의 측정 결과와 비교하였다. 분석 결과는 소음의 방향성에 의해 큰 영향을 받는 것으로 나타났으며 소음 방향성 정보에 대한 적절한 가정에 의해 시험 결과와 예측 결과가 서로 잘 일치하는 것을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.852-855
• /
• 2004

This experimental study describes the propagation characteristics of the impulse noise emitted from the exit of a straight pipe attached to the open end of a simple shock tube. The sound pressure level and directivity of the impulse noise propagating from the exit of pipe with several different diameters are measured in the far sound fold for the range of the incident shock wave Mach number between 1.07 and 1.26. The experimental results showed that the peak values of impulse noises had a strong dependance on the exit diameter of a pipe and the shock wave Mach number. The impulse noise had the directivity propagating toward to the pipe axis and the characteristics of inverse square law of propagation distance. Moreover, it was shown that the one-third octave band SPL of impulse noise was almost constant regardless of the frequency band.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.796-803
• /
• 2008

Ultrasonic testing uses the directivity of the ultrasonic wave, which propagates in on direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of an ultrasonic wave is related to the choice of probe arrangement, testing sensitivity and scanning pitch and correct measurement of defect size and location. This paper describes on the directivity measurement of ultrasonic wave using the visualization method. The directivity of shear wave emitted from the angle beam transducer were constant during propagation. The difference of directivity was existed between 2 MHz and 4 MHz angle beam transducers. When these experimental results were compared with the theory which was based on the continuous wave, it showed good agreement with theoretical directivity on the principal lobe.

• 소음진동
• /
• 제8권4호
• /
• pp.603-608
• /
• 1998

In order to obtain basic data for the prediction of railway noise propagation, the noise radiation characteristics (source position, radiation directivity, etc) of trains were measured by using the sound intensity method. The measurements were performed at a side of railway by setting an intensity-probe array. As the measurement results, it was found that rolling noise due to interaction between wheel and rail and motor noise radiation from the lower part of train are dominant. The location of main sound sources can be described as being at the height of 0.1m in the center line of track, and the radiation directivity in the cross section of actually running trains are presented as a dipole source.

• 비파괴검사학회지
• /
• 제14권2호
• /
• pp.83-89
• /
• 1994

고체내를 전파하는 초음파의 지향성과 음압 분포를 아는 일은 초음파탐상시험에 있어서 대단히 중요하다. 초음파의 지향성은 초음파탐상시험에 있어 감도, 주사 간격, 탐촉자의 배치, 결함의 종류 등을 판단하는 지침이 되고 있다. 본 논문에서는 초음파가시화법을 이용해 초음파의 지향성을 측정했다. 사각탐촉자로부터 나온 횡파의 지향성은 초음파의 전파 거리에 따라 변하지 않았다. 2MHz와 4MHz의 사각탐촉자에는 지향성의 차이가 있었다. 지향성의 중심 위치는 사각탐촉자의 입사점으로부터 뒤쪽 및 탐촉자의 내부에 위치하고 있었으며, 초음파의 전파 거리에 따라 변하지 않았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.168-173
• /
• 2003

This experimental study describes the propagation characteristics of the impulse noise emitted from the exit of a perforated pipe attached to the open end of a simple shock tube. The pressure amplitudes and directivities of the impulse wave propagating from the exit of perforated pipe with several different configurations are measured and analyzed fur the range of the incident shock wave Mach number between 1.02 and 1.2. In the experiments, the impulse waves are visualized by a Schlieren optical system for the purpose of investigating their propagation pattern. The results obtained show that for the near sound field the impulse noise strongly propagates toward to the pipe axis, but for the far sound field the impulse noise uniformly propagates toward to the all directions, indicating that the directivity pattern is almost same regardless of the pipe type. Moreover, it is shown that for the far sound field the perforated pipe has little performance to suppress the impulse noise.

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.15-21
• /
• 2003

본 연구에서는 다공관의 출구로부터 전파하는 충격성 소음의 전파특성을 실험적으로 파악하였다. 다공관은 공극율, 구멍지름 그리고 관의 길이를 각기 다르게 제작하여 충격파 관 출구에 부착하여 실험하였다. 충격파 전파마하수는 실제의 적용조건을 참고하여 1.02-1.2의 범위로 하였다. 지향성은 근음장과 원음장으로 구분하여 측정하였다. 또한 충격성 소음원인 펄스파의 전파과정을 조사하기 위하여 쉴리렌 광학장치를 이용하였다. 실험결과로부터 다공관의 소음저감 성능은 음장조건에 좌우됨을 알았다. 즉 근음장 조건에서는 다공관의 공극율과 관의 길이가 소음저감에 다소간의 영향을 미치지만, 원음장 조건에서는 다공관이 충격성 소음의 저감에 거의 기여하지 못하였다. 이와 같이 음장조건에 따라 충격성 소음의 저감성능이 다르게 되는 것은 근음장 조건에서는 관축방항으로 강한 지향성을 보이지만, 원음장 조건에서는 모든 방향으로 같은 세기로 전파하는 무지향성이기 때문이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.132-137
• /
• 2003

This paper concerns the prediction of railway noise propagation using scale model experiment in acoustics. In order to make acoustical experiment the digital signal processing technique are applied and spark discharge sound sources have been developed in which impulse response measured in 1/20 scale model railway. In the case of scale model experiment, it is difficult to realize sufficiently small size and directivity and to get sufficient sound energy and to get repeatability. Several type of Spark discharge sound source is made in laboratory. Experiment results are compared with the calculated results by the prediction model. As the results, it was found that railway noise could be predicted in acoustical scale model experiment using spark discharge sound source.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2066-2070
• /
• 2003

This experimental study describes the propagation characteristics and suppression of the impulse noise emitted from the exit of a perforated pipe attached to the open end of a simple shock tube. The experiment is performed through the systematic change of the shock wave Mach number and the geometrical parameters such as the porosity, hole diameter and length of the perforated pipe. The experimental results for the near and far sound field are presented and explained in comparison with those for a straight pipe. The results obtained show that for the near sound field the impulse noise strongly propagates toward to the pipe axis, but for the far sound field the impulse noise uniformly propagates toward to the all directions, indicating that the directivity pattern is almost same regardless of the pipe type. Moreover, the noise reduction performance of perforated pipe depends upon the condition of sound field. For the near sound field the perforated pipe has a little performance to suppress the impulse noise, but for the far sound field the perforated pipe has little performance to suppress the impulse noise.