• Smart Structures and Systems
• /
• 제24권1호
• /
• pp.53-65
• /
• 2019

Misaligned wind-wave and seismic loading render offshore wind turbines suffering from excessive bi-directional vibration. However, most of existing research in this field focused on unidirectional vibration mitigation, which is insufficient for research and real application. Based on the authors' previous work (Sun and Jahangiri 2018), the present study uses a three dimensional pendulum tuned mass damper (3d-PTMD) to mitigate the nacelle structural response in the fore-aft and side-side directions under wind, wave and near-fault ground motions. An analytical model of the offshore wind turbine coupled with the 3d-PTMD is established wherein the interaction between the blades and the tower is modelled. Aerodynamic loading is computed using the Blade Element Momentum (BEM) method where the Prandtl's tip loss factor and the Glauert correction are considered. Wave loading is computed using Morison equation in collaboration with the strip theory. Performance of the 3d-PTMD is examined on a National Renewable Energy Lab (NREL) monopile 5 MW baseline wind turbine under misaligned wind-wave and near-fault ground motions. The robustness of the mitigation performance of the 3d-PTMD under system variations is studied. Dual linear TMDs are used for comparison. Research results show that the 3d-PTMD responds more rapidly and provides better mitigation of the bi-directional response caused by misaligned wind, wave and near-fault ground motions. Under system variations, the 3d-PTMD is found to be more robust than the dual linear TMDs to overcome the detuning effect. Moreover, the 3d-PTMD with a mass ratio of 2% can mitigate the short-term fatigue damage of the offshore wind turbine tower by up to 90%.

• 대한토목학회논문집
• /
• 제29권2C호
• /
• pp.41-49
• /
• 2009

구조물의 대형화와 재료비의 증가로 인해 다수의 기성말뚝을 대체할 수 있는 대형 현장타설말뚝의 사용이 증가하고 있다. 특히, 지하연속벽공법이 적용된 현장의 기초시공에 따른 시공성 및 경제성을 향상시키거나 토사층이 깊게 분포한 경우 공벽의 안정성을 확보하기 위한 기초형식으로 바렛말뚝의 사용이 증가하고 있는 실정이다. 본 논문에서는 국내 4개 현장을 대상으로 바렛말뚝을 시공하고 양방향 재하시험을 실시하여 말뚝의 지지력 및 침하특성을 고찰하였다. 또한 하중전이분석을 통하여 주면마찰력의 평가를 위한 ${\beta}$값을 분석하여 비교 평가하였고 3차원 유한요소해석을 통하여 양방향재하시험에 따른 경계면 효과와 하중-침하특성을 살펴보았다.

• 한국재료학회지
• /
• 제17권12호
• /
• pp.654-659
• /
• 2007

Austenite precipitation behavior was studied with solidification rates and alloying contents, N and Cr, in duplex stainless steels by directional solidification. Directional solidification experiments were carried out with solidification rates, $1{\sim}100mm/s$, and N and Cr contents, $0{\sim}0.27wt.%,\;25{\sim}28wt.%$ respectively, in a duplex stainless steel, CD4MCU. As the solidification rate increases, the dendrite spacing reduced and the austenite phase in the ferrite matrix became finer. The volume fraction of austenite phase increased and its shape went to be round with increasing nitrogen contents in duplex stainless alloys. The Cr alloying element, even though it is a ferrite former, showed to enhance the nitrogen solubility in the alloy and caused the austenite round and finer. Also, Cr was supposed to decrease the austenite volume fraction, but it increased the austenite slightly due to increasing nitrogen solubility during solidification.

• The Journal of Korean Physical Therapy
• /
• 제18권4호
• /
• pp.1-9
• /
• 2006

Recently, several investigations revealed that after unilateral brain damage, movement abnormalities were exposed on the ipsilateral side as well as the upper extremity contralateral to the damaged hemisphere. Even the motor abilities had significantly recovered from ipsilateral motor deficits on not only simple sensoriomotor function, also clinical assessments since subacute stage, although could not completely returned. Such motor deficits were detected in a diversity of motor tasks depending on the interhemispheric specialization, further in clinical evaluation and a daily of activities. In the clinical features, muscular weakness, sensory loss and impaired manual dexterity were observed. In a laboratory experiment, there were increasing evidences that the kinematic processing deficits was founded in various-specific motor tasks, which ranged from simple basic element to complex tasks, such as tapping task, step-tracking, goal directional aiming task, and iso(and non-)directional interlimb coordination. In the point of view, the manifest understanding in related to ipsilateral deficits provide the clinicians with an important information for scientific management about brain injured patient's prognosis and therapeutic guidelines.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.297-302
• /
• 2003

The effects of risering design and alloying element on the formation of defects such as external depression, primary and secondary shrinkage cavity in gray cast iron were investigated. Two types of risering design for the cylindrically step-wise specimen, No. 1(progressive solidification) and No. 2(directional solidification) risering designs, were prepared and five different alloy compositions were casted. In the No. 1 risering design, external depression or primary shrinkage cavity due to liquid contraction was observed in all the specimens from ISO 150 to ISO 350. The primary shrinkage cavity was located right under the top surface or connected to the top surface, and was characterized by smooth surface. Its size increased with an increase in ISO number. However, neither secondary shrinkage cavity nor swollen surface was observed in all the castings. In the No.2 risering design, neither primary shrinkage cavity nor secondary shrinkage cavity was observed in all the specimens due to proper risering design. A swollen surface was also not observed in all the castings with the application of pep-set mold.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.129-145
• /
• 2020

In typical, structural topology optimization plays a significant role to both increase stiffness and save mass of structures in the resulting design. This study contributes to a new numerical approach of topologically optimal design of Mindlin-Reissner plates considering Winkler foundation and mathematical formulations of multi-directional variable thickness of the plate by using multi-materials. While achieving optimal multi-material topologies of the plate with multi-directional variable thickness, the weight information of structures in terms of effective utilization of the material at the appropriate thickness location may be provided for engineers and designers of structures. Besides, numerical techniques of the well-established mixed interpolation of tensorial components 4 element (MITC4) is utilized to overcome a well-known shear locking problem occurring to thin plate models. The well-founded mathematical formulation of topology optimization problem with variable thickness Mindlin-Reissner plate structures by using multiple materials is derived in detail as one of main achievements of this article. Numerical examples verify that variable thickness Mindlin-Reissner plates on Winkler foundation have a significant effect on topologically optimal multi-material design results.

• 생물환경조절학회지
• /
• 제1권1호
• /
• pp.37-51
• /
• 1992

Quantizing and extracting visual features of mushroom(Lentinus edodes L.) are crucial to the sorting and grading automation, the growth state measurement, and the dried performance indexing. A computer image processing system was utilized for the extraction and measurement of visual features of front and back sides of the mushroom. The image processing system is composed of the IBM PC compatible 386DK, ITEX PCVISION Plus frame grabber, B/W CCD camera, VGA color graphic monitor, and image output RGB monitor. In this paper, an automatic thresholding algorithm was developed to yield the segmented binary image representing skin states of the front and back sides. An eight directional Freeman's chain coding was modified to solve the edge disconnectivity by gradually expanding the mask size of 3$\times$3 to 9$\times$9. A real scaled geometric quantity of the object was directly extracted from the 8-directional chain element. The external shape of the mushroom was analyzed and converted to the quantitative feature patterns. Efficient algorithms for the extraction of the selected feature patterns and the recognition of the front and back side were developed. The developed algorithms were coded in a menu driven way using MS_C language Ver.6.0, PC VISION PLUS library fuctions, and VGA graphic functions.

• 한국재난정보학회 논문집
• /
• 제10권3호
• /
• pp.458-464
• /
• 2014

화재방호계통 스프링클러 시스템의 경우 지진 발생 시 그리고 지진 발생 후에 유도되는 화재로부터 건물과 인명을 보호하고 에너지를 공급을 위한 필수 요소라 할 수 있다. 본연구의 주목적은 양방향 (x, y) 그리고 3축(x, y, z)방향의 지진의 영향을 받는 저층 건물에 설치된 복층구조 스프링클러 파이프라인의 거동과 내진성능을 평가 하고자 함이다. 결과적으로 건물의 비구조 요소인 스프링클러 파이프라인의 경우 각 층별로 다른 거동을 보이고 있으며, 또한 수직 방향의 지진의 경우 수평방향의 지진보다 파이프라인에 미치는 영향은 미미하다고 볼 수 있다.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.59-64
• /
• 2017

Diverter is an essential element in gravimetric calibration method of flowmeter. Error of diverter are influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. That's why, time detection position of diverter is tuned through repetitive test for minimizing error of diverter. Further the diverter must be compared with the other institutions test since the influence on the accuracy of the flow meter used in the test. In this paper, errors (flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location) of diverter are decreased by produced uni-direction diverter and error of gravimetric calibration system is decreased. Uni-direction diverter is calibrated by gravimetric calibration system with precision flowmeter, the flowmeter is calibrated by pipe prover and other institutions and uni-direction diverter is evaluated. Uni-direction diverter is not influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. As a result, Uni-direction diverter can calibrate in wider scope since increasing ratio of maximum and minimum flow rate of uni-direction diverter.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.21-28
• /
• 2020

Integrated bidirectional OBC/LDC was developed to reduce the volume for elements, avoid space restriction, and increase efficiency in EV vehicles. In this study, a DC-DC converter in integrated OBC/LDC circuits was composed of an SRC circuit with a stable output voltage relative to an LLC circuit using a theoretical method and simulation. The resonant network of the selected circuit was optimized to minimize the power loss and element volume under constraints for the buck converter and the battery charging range. Moreover, the validity of the optimal model was verified through an analysis using a theoretical method and a numerical analysis based on power loss at the optimized resonant frequency.