• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.160-161
• /
• 2012

This paper is to develop & analyze the position & direction error equations in the free-gyro positioning & directional system by using two free gyros and is to find out the amount of the errors. First, the position & direction error equations are introduced and developed, based on the position & direction equations. Second, the value of errors is discussed based on sensors errors.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.329-335
• /
• 2013

This paper is to develop the position error equations including the attitude errors, the errors of nadir and ship's heading, and the errors of ship's position in the free-gyro positioning and directional system. In doing so, the determination of ship's position by two free gyro vectors was discussed and the algorithmic design of the free-gyro positioning and directional system was introduced briefly. Next, the errors of transformation matrices of the gyro and body frames, i.e. attitude errors, were examined and the attitude equations were also derived. The perturbations of the errors of the nadir angle including ship's heading were investigated in each stage from the sensor of rate of motion of the spin axis to the nadir angle obtained. Finally, the perturbation error equations of ship's position used the nadir angles were derived in the form of a linear error model and the concept of FDOP was also suggested by using covariance of position error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.915-927
• /
• 1997

In this paper, we propose an error concealment technique using directional interpolation in block-based image compression. In the proposed method the edge direction is determined by finding the maximum correlation coefficients of boundary pixels of blocks neighboring the errored block in spatial domain. Then the errored block is interpolated linearly or bilinearly along the determined edge direction. The proposed method can conceal the block error, the macro block error, and the slice error adaptively. Also, the parameters for the directional interpolation are represented by closed forms. When applied to compressed images, the proposed method shows superior subjective and objective quality to conventional error concealment methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.133-140
• /
• 2005

This paper introduces a spatial error concealment technique using directional interpolation in block-based compression. The first step involves finding the spatial direction vectors represented an edge-direction in the lost block using spatial boundary matching algorithm. Then, the error blocks are recovered by directional interpolation through these vectors and concealed by using the recovered blocks which have lower directional boundary matching error out of them relatively. This proposed method is able to deal with errors on macroblock or slice level adaptively. And it has lower complexity and maintains better performance compared to the conventional methods.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1496-1500
• /
• 2008

Less than 1 % directional error in the range of 5 meters in the green could cause a stroke or more. Although there are several reasons offsetting the direction of the golf ball, lie angle and sidespin effect are the most crucial factors of the putting game. Simple equation is conformed to the experimental results of the deviation of the directional error in all distance. Also, the experimental results of the putting robot show that there are significant side spin effects.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.119-122
• /
• 2001

This paper discusses the peg-in-hole task of chamferless parts using force/moment/vision sensors. The directional error occurring during the task are categorized into two cases according to the degree of initial errors, And different Mechanical analysis has been accomplished for each cases. This paper proposes an algorithm which enables to reduce intial directional error using digital Images acquired from hand-eyed vision sensor, And to continue the task even with the large directional error by adjusting the error using digital image processing. The effectiveness of the algorithm has been demonstrated through experimentation using 5-axis robot equipped with a developed controller force/moment sensor and color digital camera on its hand.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.197-205
• /
• 2014

In applications of adaptive noise control or active noise control, the presence of a transfer function in the secondary path following the adaptive controller and the error path, been shown to generally degrade the performance of the Least Mean Square (LMS) algorithm. Thus, the convergence rate is lowered, the residual power is increased, and the algorithm can become unstable. In general, in order to solve these problems, the filtered-x LMS (FX-LMS) type algorithms can be used. But these algorithms have slow convergence speed and weakness in the environment that the secondary path and error path are varied. Therefore, I present the new algorithm called the "Bi-directional Filtered-x (BFX) LMS" algorithm with nearly equal computation complexity. Through experimental study, the proposed BFX-LMS algorithm has better convergence speed and better performance than the conventional FX-LMS algorithm, especially when the secondary path or error path is varied and the impulsive disturbance is flow in.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.161-168
• /
• 2012

In this paper, we have experimentally studied on phase characteristics of airborne radome for ELINT directional finding system, because it is difficult to find theoretical solutions for phase error of the radome. Especially, we described the millimeter wave band radome that was fabricated with cyanate-ester material and its thickness was 2mm. We presented the phase error about millimeter band radome. That phase error is about 30 degrees for parallel and perpendicular polarization in the K-Ka band. That is reasonable value for the ELINT directional finding system.

• International Journal of Contents
• /
• v.10 no.2
• /
• pp.9-17
• /
• 2014

Since vehicles' trajectories are so complex and dense traffic changes in nature frequently, the VANET (Vehicles Ad-hoc Network), using Omni-directional Antenna, has many channel collisions (or overlapping) on Data Link phrases (MAC layers). It is not easy to keep a good seamless communication status for VANET because of its unpredictable network environment. Among VANET research, Directional Antenna have been proposed as one of the most common systematical solutions to reduce (or to mitigate) this miss-communication problems by narrowing communicational ranges and making use of its customized error-detection process. However, even though Directional Antennas help VANET keep good seamless communication, many VANET researchers have reported that Directional VANET still has miss-communicational problems - this has lead to problems like 'Directional Hidden Terminal Problem', 'Deafness', 'Un-accuracy Lobe Scopes' and 'High Deployment Cost' being reported in various papers. To establish well-organized design assessments for a good Directional VANET MAC protocol to overcome these problems, we rearranged and grouped current Directional VANET' qualitative criteria from several current survey papers using these categories- 'Directional Discovery', 'Directional Forwarding' and 'Directional Handover'. In addition, based on the results of the following analysis, we show the essential design concerns that need to be looked at in order to develop a well-designed Directional-VANET MAC protocol.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.2
• /
• pp.73-80
• /
• 2001

The objective of this research is to develop a measurement error model for sculptured surface in On-Machine Measurement(OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC machining center is derived using a 4$\times$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the sculptured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-sep measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.