• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.3
• /
• pp.148-151
• /
• 2013

A new direction of arrival estimation method using effects of model errors and sensitivity analysis is proposed. Since a desired signal is obtained after interference rejection through correction effects of model error, the effect of channel interference on the estimation is significantly reduced. Through simulation, we show that the proposed method offers significantly improved estimation resolution and accuracy relative to existing method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.379-384
• /
• 2009

A human gaze detection and tracing method is importantly required for HMI(Human-Machine-Interface) like a Human-Serving robot. This paper proposed a novel three-dimension (3D) human gaze estimation method by using a face recognition, an orientation estimation and SVMs (Support Vector Machines). 2,400 images with the pan orientation range of $-90^{\circ}{\sim}90^{\circ}$ and tilt range of $-40^{\circ}{\sim}70^{\circ}$ with intervals unit of $10^{\circ}$ were used. A stereo camera was used to obtain the global coordinate of the center point between eyes and Gabor filter banks of horizontal and vertical orientation with 4 scales were used to extract the facial features. The experiment result shows that the error rate of proposed method is much improved than Liddell's.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.35-40
• /
• 2015

This paper presents the sensorless position control of the Permanent Magnet Synchronous Motor (PMSM) using stator flux estimation and Phase Lock Loop (PLL). The field current and the torque current are required in order to perform the vector control of the PMSM. At this time, it is necessary for the torque to know the exact position of the magnetic flux generated by the permanent magnet, because the torque must be applied torque current in the direction orthogonal to the permanent magnet. In general the speed of the PMSM is controlled by using a magnetic position sensor. However, this paper, we estimates the stator flux by using the PLL method without the magnetic position sensor. This method is simple and easy, in addition it has the advantage of a stabile estimation of the rotor. Finally the proposed algorithm was confirmed by experimental results and showed the good performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.84-92
• /
• 2015

This paper proposes a new approach to reduce the target estimation error of the measurement angle, especially applied to the medium and long range surveillance radar. If the target has no maneuver and no change in heading direction for a certain time interval, the predicted angle of interacting multiple model(IMM) from the previous track information can be used to reduce the angle estimation error. The proposed method is simulated in 2 scenarios, a scenario with a non-maneuvering target and a scenario with a maneuvering target. The result shows that the new fusion solution(weighted IMM) with the predicted azimuth and the measured azimuth is worked properly in the two scenarios.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2006

This paper presents methods of robot localization using recent radio frequency identification technology. If the absolute position and orientation of a tag are given in an indoor environment where RFID tags are installed, a robot can estimate its location using the relationship of the identified tag and the robot in a relative coordinate. To derive this relationship, we propose three estimation techniques using a model of a RFID reader, the direction of identification and the detection range. In this algorithm, a suitable estimation method is selected out of the three proposed techniques depending on the situations and trajectory of robot in the detection range. Simulation and experimental results show that the proposed methods can provide good performance for localization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.961-963
• /
• 2012

The sound source localization system is used to some area such as robotic system, object localization system, guarding system and medicine. So time delay estimation and angle estimation of sound direction are studied until now. These days time delay estimation is described in LabVIEW which is used to create innovative computer-based product and deploy measurement and control systems. In this paper, the development of signal monitoring platform is presented for sound source localization. This platform is designed in virtual instrument program and implemented in two stages. In first stage, data acquisition system is proposed and designed to analyze time delay estimation using cross correlation. In second stage, data obtaining system which is applied and designed to monitor analog signal processing is proposed.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.356-365
• /
• 2016

This research proposes a modified particle filter to increase the accuracy of vehicle tracking in a noisy and occluded medium. In our proposed method for vehicle tracking, the direction angle of a target vehicle is calculated. The angular difference between the motion direction of the target vehicle and each particle of the particle filter is observed. Particles are filtered and weighted depending on their angular distance to the motion direction. Those particles moving in a direction similar to that of the target vehicle are assigned larger weights; this, in turn, increases their probability in a given likelihood function (part of the process of estimation of a target's state parameters). The proposed method is compared against a condensation algorithm. Our results show that the proposed method improves the stability of a particle filter tracker and decreases the particle consumption.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1636-1645
• /
• 2016

In navigation systems that use collected trajectory for routing, the number and diversity of trajectory data are crucial despite the infeasible limitation which is that all routes should be collected in person. This paper suggests an algorithm combining trajectories only by collected GPS data and generating new routes for solving this problem. Using distance between two trajectories, the algorithm estimates road intersection, in which it also predicts the correlated direction of them with geographical coordinates and makes a decision to combine them by the correlated direction. With combined and generated trajectory data, this combination way allows trajectory-based navigation to guide more and better routes. In our study, this solution has been introduced. However, the ways in which correlated direction is decided and post-process works have been revised to use the sequential pattern of triangles' area GPS information between two trajectories makes in road intersection and intersection among sets comprised of GPS points. This, as a result, reduces unnecessary combinations resulting redundant outputs and enhances the accuracy of estimating correlated direction than before.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.664-672
• /
• 2009

In this paper, joint methods of cell searching and Direction-of-Arrival (DoA) estimation for a mobile relay station with a uniform circular array are proposed. The proposed joint estimation method for the mobile relay station is robust even when there exist symbol timing offsets between the signals received from adjacent base stations. Also, the proposed joint estimation method can reduce computational complexity and processing time, compared with the case where cell searching and DoA estimation are performed separately. Performances of the proposed method are evaluated by computer simulation under Mobile WiMAX environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.782-790
• /
• 2014

In this paper, we apply the 2-D Matrix Pencil Method(MPM) to the estimation of the direction of arrival(DOA) of multiple signals of interest(SOIs) in bistatic MIMO radar. The 2-D MPM shows remarkable performance under a low SNR environment and low computational complexity to estimate the DOA of multiple SOIs. Also, it is possible to estimate the direction of departure(DOD) which is an angle from transmitter to target. To verify the proposed algorithm, we applied the proposed algorithm to a uniformly spaced linear array(ULA) and compared the RMSE(Root Mean Square Error) of DOA and DOD under the various SNR with those of the 2-D Capon algorithm.