• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.130-134
• /
• 2011

This study aims at the structural safety with optimum design of automotive bumper in order to minimize the maximum stress and displacement and reduce the minimum quantity of bumper material. As the forces of X and Y direction increase, equivalent stress and displacement increase. The displacement of X direction force increases more than 20% in comparison with Y direction force. But the equivalent stress of Y direction force increases more than 60% in comparison with X direction force. The mass of inner bumper becomes minimum and the mass of outer bumper becomes maximum when the force of 4000N is applied on the direction inclined at $45^{\circ}$ toward outer bumper. In 50% range of increase and decrease at X and Y direction force, the optimum forces of X and Y component becomes 2368.8N and 1538.8N respectively. And the masses of inner and outer polypropylene bumper become $3.3227{\times}10^{-2}kg$and $3.5538{\times}10^{-2}kg$respectively.

• 한국포장학회지
• /
• 제7권1호
• /
• pp.9-15
• /
• 2001

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was carried out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiberboards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.261-269
• /
• 2023

During a nuclear power plant (NPP) accident, radioactive material may be released into the surrounding environment in the form of a radioactive plume. The behavior of the radioactive plume is influenced by meteorological factors such as wind direction and speed. If the residents are evacuated to a shelter in the direction of the flow of the radioactive plume, the radiation exposure of the residents may increase, contrary to the purpose of the evacuation. To avoid such an undesirable outcome, this paper applies a big data analysis to evaluate the suitability of the shelter locations near 5 NPPs in the Republic of Korea in terms of the seasonal wind direction frequency in those areas. To this end, the wind data measured around the NPPs from 2016 to 2020 were analyzed to derive the seasonal wind direction frequency using a big data analysis. These analyses results were then used to determine how many shelters around NPPs locate in areas with prevailing wind direction per season. Then, suggestions were made on the direction for residents not to evacuate, if possible, that is, the prevailing seasonal wind directions for 5 NPPs, depending on the season in which the accident occurs.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4089-4095
• /
• 1976

The safety of shore structure including the sea dipe is largely affected by typhoon. Accordingly it is desirable to analize the typhoon and determine the wind direction and velocity for use in planning and design of the structure. This method was adopted for the design of the Yong San Gang Estuary Dam. A comparative study of the results of typhoon analysis with the meteorological data obtained through actual observation is summarized as follows; (1) 62% of the typhoons occur during May to June in a year, and 62% of the typhoons which have an influence on the Korean peninsula, especially the proposed estuary dam fsite, proceed eastward through the zone in lat. 36$^{\circ}$-37$^{\circ}$N. Such typhoons occur two to three times a year on the average. (2) Data on typhoon "SARL" were used as a model case in designing the estuary dam, where it was proved that a southwesterly wind had a maximum velocity of 30m/sec in case r=150km, ${\alpha}$=120$^{\circ}$. Within the range of 22$^{\circ}$30'on the right and left side of the fetch line of the estuary dam, the wind direction varied SSW\longrightarrowSW\longrightarrowWSW, and the wind velocity varied 29m/sec\longrightarrow30m/sec\longrightarrow125m/sec. Such phenomemum lasted for five hours. (3) An analysis of data obtained during 44 years at Mok Po Meteorological Station shows that a wind with a velocity of some 25m/sec occurred twelve times in the S-direction and two times in the SW-direction, while that with a velocity of 30m/sec occurred three times in the S-direction, three times in the SSW-direction and one time in the SW-direction. The wind which had an influence on the estuary dam had a direction of SSW\longrightarrowSW\longrightarrowWSW and a velocity of min. 30m/sec. Actually, a wind with a max. velocity of 31.3m/sec occurred in the SSW-direction on March 15 and 16, 1956 where the mean velocity during two hours was 28m/sec and that during four hours was 24.6m/sec. (4) The data obtained through actual observation show that when the velocity is low, the wind with a fixed direction lasts long, and when the velocity is high, it is short-lived. It is difficult to determine the velocity of a wind which blows in a fixed direction for consecutive two or four hours. Therefore, the values obtained through typhoon analysis are larger that those obtained through actual observation, and hence, it is resonable to use the analyzed valuse for design of the estuary dam and shore structures. (5) The greatest effect was had on the estuary dam when typhoon was proceeding at a velocity of 29.71m/sec in the direction of ${\alpha}$=120$^{\circ}$(SW) at a point of R=150km from the center of the typhoon.

• 대한원격탐사학회지
• /
• 제16권1호
• /
• pp.13-24
• /
• 2000

SAR 영상에 나타나는 지질학적 선구조는 안테나의 관측방향에 따라 증가 혹은 감소하여 나타난다. 본 연구에서는 지질학적 선구조 추출시 관측방향에 따라 발생하는 방향편차를 정량적으로 분석하였다. SAR 영상에 나타나는 방향편차의 정량적인 분석을 위해 Landsat TM 영상과 JERS-1 SAR 영상에서 각각 선구조를 추출하였으며 기본 선구조의 판단을 위해 TM 영상에서 추출된 선구조와 야외조사자료 및 지질도상에 나타나는 단층선과의 연관성 분석을 실시하였다. 연구지역내의 SAR 영상에 나타나는 선구조는 관측방향에 평행할 때 최소를, 수직일 때 최대를 보이나 관측방향에 평행한 선구조일지라도 지형적인 특성에 따라 어느 정도 선구조의 추출이 가능한 것으로 나타났다. SAR 영상에 나타나는 선구조의 상대적 증감비율에 대한 분석 결과 길이는 33%~159%, 빈도수는 28%~l87%의 증감을 보였으며 방향별 증감비율을 cosine 함수로 최적화하여 표현한 경우 관측방향에 수직인 방향을 기준으로 약 $\pm$50$^{\circ}$이내 방향에서 TM에 비해 SAR 영상에서의 선구조 추출이 용이한 것으로 나타났다. 또한 길이가 짧은 선구조의 추출 여부는 관측방향에 따라 더 많은 영향을 받는 것으로 나타났다.

• 대한토목학회논문집
• /
• 제26권2D호
• /
• pp.275-283
• /
• 2006

최근 도시지역의 확산과 교통망의 발달로 도로안내표지의 효율적 정보제공이 요구되고 있으며, 안내체계의 효율성을 증대시킬 수 있는 안내지명의 선정원칙과 안내체계가 필요한 실정이다. 따라서 본 연구에서는 수원시의 도로표지 안내정보의 실태를 파악하여 적절한 정보들을 제공되고 있는지 또한 제공된 정보들은 체계적인 연속성을 가지고 있는지 파악하고자 하였다. 즉, 도로이용자가 찾고자하는 한 지점을 중심으로 도로표지판의 안내정보의 적절성과 연계성 및 출현빈도에 관한 조사를 실시하였다. 수원시청을 최종목적지로 하여 주변도시 접경부 의왕시, 안산시, 화성시, 오산시, 용인시 등지 에서 수원시청까지 5개의 간선도로에 설치된 도로표지판 중 방향예고표지와 방향표지, 시설안내표지등을 분석하였다. 결과, 도로표지규정의 안내 지명선정 원칙에 의한 랜드마크나 1등급으로 분류되는 지명들은 상대적으로 찾기가 다소 용이하나, 그 외의 이용자가 원하는 지명을 알아내는데 상당히 어려움이 있는 것으로 파악되었다. 이는 안내지명만으로 현 위치를 파악하기가 어렵고 제시된 안내지명이 직진방향에서 만날 수 있는 지명뿐 아니라 좌회전 혹은 우회전을 해야만 만날 수 있는 지명일 경우 방향을 알 수가 없어 비효율적인 정보가 제공되고 있는 것으로 파악되었다. 게다가 선정된 안내지명마저도 출현빈도의 적정성에 문제가 있고, 표지간의 연계가 이루어지고 있지 않아 도로이용자에게 많은 불편함을 주고 있는 것으로 나타났는데, 이러한 이용 상의 불편을 방지하기 위해서 도로표지의 체계적인 개선이 필요하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.341-343
• /
• 1995

In this paper, an algorithm is presented to recogniz the driving direction of a vehicle and obstacles in front of it based on highway road image. The algorithm employs a neural network with 27 sub sets obtained from the road image as its input. The outputs include the direction of the vehicle movement and presence or absence of obstacles. The road image, obtained by a video camera, was digitized and processed by a personal computer equipped with an image processing board.

• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.379-386
• /
• 1992

In this paper a direction finding method which can which can estimate the direction angles of source signals impinging on the sensor array in which sensor noises are correlated is studied. This method performs the estimation of source direction angles form sensors, regardless of sensor noise correlation, by eliminating the sensor noise correlation coefficient which can be accurately estimated. Finally, this paper shows, through the computer simulation, that the proposed, method is extremely useful and superior when there exists the noise correlation between sensors, .

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.386-389
• /
• 2006

The sea surface wind speed (SSWS) derived by microwave radiometer can be contaminated by change of microwave brightness temperature owing to the angle between the sensor azimuth and the wind direction (Relative Wind Direction). We attempt to correct the contamination to the SSWS derived by Advanced Microwave Scanning Radiometer (AMSR) on Advanced Earth Observing Satellite II (ADEOS-II), by applying the method proposed by Konda and Shibata (2004). The improvement of accuracy of the SSWS estimation amounts to roughly 60% of the error caused by the RWD effect.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.77-83
• /
• 2003

We propose two algorithms to generate (1) polygonal meshes and (2) developable surface patches far generalized cylinders defined by contours of discrete curves. To solve the contour blending problem of generalized cylinder, the presented algorithms have adopted the algorithm and related properties of LIDM (linear interpolation by direction map) that interpolate geometric shapes based on direction map merging and group scaling operations. Proposed methods are fast to compute and easy to implement.