• KIEAE Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• 현장농수산연구지
• /
• 제13권1호
• /
• pp.27-33
• /
• 2011

코팅소재별 벼 종자의 발아 및 입묘 특성을 구명하기 위하여 무처리, 규산코팅, 철분코팅, 규산복토 처리에서 유묘의 입모율, 경시적 입묘양상의 변화, 초장, 엽수, 생체중의 특성을 조사결과를 요약하면 다음과 같다. 1. 입모율은 무처리 95% 규산코팅 및 규산복토 92%, 철분코팅 77%로 각가 나타나 무처리에서 가장 높게 나타났지만 일반적으로 각종 제한요인(새 피해, 건조, 부묘현상 등)이 많은 포장조건에서는 무처리 조건이 상반된 결과가 나타나고 있으며 규산코팅 또는 복토조건에서 철분코팅보다 높은 입묘율을 보였다. 2. 벼 유묘의 초장에서는 무처리 11.4cm 규산코팅 10.8cm, 규산복토 8.8cm, 철분코팅 6.9cm으로 각각 나타났다. 3. 유묘의 생체중은 지상부의 경우 무처리 50mg, 규산코팅 및 규산복토 40mg, 철분코팅 30mg이었으며, 지하부의 경우 규산코팅 및 규산복토 20mg, 무처리 및 철분코팅 10mg으로 각각 나타났다.

• 현장농수산연구지
• /
• 제12권1호
• /
• pp.29-38
• /
• 2010

본 연구는 기존의 무논점파기의 문제점(새 피해, 파종한 종자의 건조현상, 강우 또는 관개 시 가벼운 볍씨 또는 어린 유묘의 뜨는 문제 등)으로 초기 입묘가 불량한 요인을 개선하기 위하여 시험을 추진하였으며 얻어진 결과는 다음과 같다. 1. 롤러 간의 피복재 사상(모래형) 규산질비료의 피복량이 일정치 않았다. 2. 기존의 무논점파 파종장치의 정확한 점파작업이 요구되었으며 파종작업 시 볍씨가 롤러 홈 회전과정에서 발생되는 파손이 인정되었으며 이에 대한 개선이 요구되었다. 3. 사상 규산질비료의 정밀한 피복작업이 미진하였으며 이를 위한 복토재의 개선(2mm내외 사상)과 파종작업장치의 정확성이 요구되었다. 4. 파종작업 시 바람이 강하게 불 경우 사상규산질비료의 피복위치 불안정으로 이에 대한 보완대책이 요구되었다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.175-179
• /
• 2007

This experimental demonstration has successfully shown that it is possible to use direct sunlight for the illumination of deeper building zones using the material for light path system(light duct). Three kinds of reflectors which were 95% Silver vaporizing fixed, 85% Anodized and 85% Hot melted applied to evaluate and compare their performances each others. Also, these three kind of reflectors were compared in view point of economics. The most high performance was obtained in 95% Silver vaporizing fixed reflector hater than another reflectors of 85% Anodized reflector and 85% Hot melted reflector even though more high production cost in 95% Silver vaporizing fixed reflector. The rest two reflectors of 85% Anodized and 85% Hot melted $10{sim}15%$ less performance than 95% Silver vaporizing fixed reflector but their production cost were low than the production cost of 95% Silver vaporizing fixed reflector which identified very weak and light yellow color in the light.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.91-97
• /
• 2009

It is undertaken systematization of results of satellite and ground observation parameters characterizing a current condition and climatic variability of two selected geographical areas. One of them covers territory of Azerbaijan and another covers a wide area of Caspian See region. Average values and mean square deviations of following values are investigated: outgoing long wave radiation during a day and night (in nebulosity and cloudless). absorbed within a day of the stream of a sunlight of the system in "a terrestrial surface-atmosphere". degree of a covering by clouds of the selected areas during a day and at night, ground temperature values of air. pressure and speed of a wind. Monthly average values of corresponding parameters create a basis of suggested investigations. It has been presented features of a time course of investigated parameters for each month and year in the whole due to the continuously observations since 1982-2000. The scientific problem consists that there are no existed models which authentically would be cover the main aspects of a realities specified changes: they are identified by economic activities. growth of the population and other features of development of a human society or internal fluctuations of biogeophysical/climatic system. Possibilities of predictability of biosphere and climate changes depend on available timely supervision. adequacy of construction of appropriate models. understanding of mechanisms of direct and feedback influences in such complicated systems.

• 한국실내디자인학회논문집
• /
• 제22권2호
• /
• pp.140-148
• /
• 2013

The purpose of this study is to examine the current status of allergic diseases associated with the housing environment and the psychological attitude of residents towards relevant risk factors. This study surveyed 1,200 people. In the first round, 200 participants were questioned through direct survey methods, while 1,000 participants filled out an online survey in the second round. Selected study subjects consisted of allergic diseases known to be closely related to housing environment factors. With advice from medical experts, the analysis included the examination of the prevalence status regarding five types of allergy-related diseases-allergic conjunctivitis, allergic rhinitis, allergic dermatitis, asthma and headache-with the range of disease incidence set within the past ten years. The survey was conducted on all age groups except those nine years old and younger, and the findings are as follows. Allergic diseases were found to be more prevalent among women than men. Residents identified effective methods for the alleviation and treatment of allergic diseases as ventilation, use of environmentally-friendly finishing materials, maintenance of a clean living space through cleaning or washing, and sunlight exposure. Residents' understanding of allergic diseases varied depending on their experience with such diseases and residential characteristics.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.352-356
• /
• 2014

Purpose: We estimated the dietary qualities of green soybean (edamame) by using a specialized NIR transmission spectrometer to determine the constitutive properties of the soybean, such as the sucrose content and ninhydrine reaction quantity (NRQ; defined by the ninhydrine reaction, which has a high positive correlation with the total free amino acids), with the purpose of establishing a quality assurance system. Methods: We used a newly developed spectrometer probe that enables in situ estimation of the constituents of the soybean. Results: The calibration results obtained using a wavelength range of 760-960 nm were characterized by $R^2$ = 0.57 and standard error of cross-validation (SECV) of 0.78% for sucrose, and $R^2$ = 0.59 and SECV = 0.35% for NRQ. Conclusions: These results are inferior to those of our previous study obtained using a specialized bench-type transmission spectrometer. The poorer results are attributed to several possible reasons, including the effect of direct sunlight and the unstable sample presentation. We plan to conduct further study using improved optical layout and sample presentation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.402-405
• /
• 2006

Radiometric calibration of optical image data is necessary to convert raw digital number (DN) value of each pixel into a physically meaningful measurement (radiance). To extract rather quantitative information regarding biophysical characteristics of the earth surface materials, radiometric calibration is often essential procedure. A sensor detects the radiation of sunlight interacted atmospheric constituents. Therefore, the amount of the energy reaching at the sensor is quite different from the initial amount reflected from the surface. To achieve the target reflectance after atmospheric correct, an initial step is to convert DN value to at-sensor radiance. A linear model, the simplest radiometric model, is applied to averaged spectral radiance for this conversion. This study purposes to analyze the sensitivity of several factors affecting on radiance for carrying out absolute radiometric calibration of panchromatic images from KOMPSAT2 launched at July, 2006. MODTRAN is used to calculate radiance at sensor and reflectance of target is measured by a portable spectro-radiometer at the same time the satellite is passing the target for the radiometric calibration. As using different contents of materials composing of atmosphere, the differences of radiance are investigated. Because the spectral sensitivity of panchromatic images of KOMPSAT2 ranges from 500 to 900 nm, the materials causing scattering in visible range are mainly considered to analyze the sensitivity. According to the verified sensitivity, direct measurement can be recommenced for absolute radiometric calibration.

• 한국컴퓨터그래픽스학회논문지
• /
• 제16권2호
• /
• pp.39-45
• /
• 2010

물체의 색은 모양과 더불어 사람이 바깥세상의 사물을 알아보는데 중요한 역할을 한다. 이런 색상을 인식하는 것은 태양과 같은 빛이 존재하기 때문이다. 빛은 여러 파장들로 구성되어 있으며, 눈에 보이지 않는 적외선, 자외선의 영역과 색을 인식시켜 줄 수 있는 눈에 보이는 가시광선 영역 등으로 이루어져 있다. 이러한 모든 파장의 빛이 균등하게 혼합되면 그 빛은 흰 색을 띄게 되며, 이를 백색광이라고 한다. 백색광이 굴절이 이루어지면 그 구성되어져 있는 가시광선 영역이 여러 가지 색으로 갈라지는데 이것을 분산현상이라 한다. 본 논문에서는, 백색광을 무지개의 대표적인 일곱 가지 색상으로 구성하고 자연의 분상현상을 시뮬레이션하기 위해 N색 분산 포톤 매핑 방법을 제안하였다.

• 대한공간정보학회지
• /
• 제21권1호
• /
• pp.87-93
• /
• 2013

3차원 시뮬레이션을 이용하여 조망, 일조, 일영, 직광 등 3차원 공간분석에 대한 분야가 발전함에 따라 3차원 시뮬레이션에 필요한 3차원 지형모델 제작에 관한 연구가 필요하게 되었다. 본 연구에서는 법선의 방정식을 이용하여 2차원 설계도면을 3차원 지형모델로 변환함으로써 개발후의 3차원 지형모델을 생성하는 방안을 제시하였다. 2차원 설계로부터 3차원 지형모델 생성을 위한 자동화 알고리즘을 개발하였으며, 향후 세부적인 연구가 필요할 것으로 예상된다.