• KIEAE Journal
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2011

The study was performed to evaluate rice seed germination, seedling emergence and seedling establishment under different coating materials such as iron powder, silicate powder and silicate coverage after direct seeding. There were differences among coating materials as follows; 1. In seedling establishment there was the highest in untreated control> silicate-coated seeds and silicate coverage>iron-coated seeds. In case of untreated control this result due to laboratory experiment unlike field conditions where has been constraints in bird damages, seed dry under strong sunlight and buoyance after rainy and/or irrigation. 2. Thus, there was the highest in untreated control>silicate-coated seeds>silicate coverage>iron-coated seeds, respectively. 3. Total fresh weight(shoots and roots) of the seedling was also highest in untreated control>silicate-coated seeds and silicate coverage> iron-coated seeds.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.29-38
• /
• 2010

This research was conducted to improve a hill seeding technology under puddled wet soil condition for direct seeded rice. There were severe constrains in hill sowing method under puddled wet soil such as a bird damages, dryness of seeds sown due to strong sunlight in May and buoyancy of seeds and young seedlings after raining and irrigation particular under strong wind. Thus, we have adopted a sandy type(<2mm) silicate covering method in Bokto drill seeding technology for a hill seeding method as well. The average silicate amount in order to cover seeds sown was of 840kg/ha which was evaluated to a proper volume for those problem solution and farmer's handling during sowing operation. In this experiment there was an additional problem like a precious hill drop of rice seeds, covering of silicate over hill seeded rice and seed broken during roller operation.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.175-179
• /
• 2007

This experimental demonstration has successfully shown that it is possible to use direct sunlight for the illumination of deeper building zones using the material for light path system(light duct). Three kinds of reflectors which were 95% Silver vaporizing fixed, 85% Anodized and 85% Hot melted applied to evaluate and compare their performances each others. Also, these three kind of reflectors were compared in view point of economics. The most high performance was obtained in 95% Silver vaporizing fixed reflector hater than another reflectors of 85% Anodized reflector and 85% Hot melted reflector even though more high production cost in 95% Silver vaporizing fixed reflector. The rest two reflectors of 85% Anodized and 85% Hot melted $10{sim}15%$ less performance than 95% Silver vaporizing fixed reflector but their production cost were low than the production cost of 95% Silver vaporizing fixed reflector which identified very weak and light yellow color in the light.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.91-97
• /
• 2009

It is undertaken systematization of results of satellite and ground observation parameters characterizing a current condition and climatic variability of two selected geographical areas. One of them covers territory of Azerbaijan and another covers a wide area of Caspian See region. Average values and mean square deviations of following values are investigated: outgoing long wave radiation during a day and night (in nebulosity and cloudless). absorbed within a day of the stream of a sunlight of the system in "a terrestrial surface-atmosphere". degree of a covering by clouds of the selected areas during a day and at night, ground temperature values of air. pressure and speed of a wind. Monthly average values of corresponding parameters create a basis of suggested investigations. It has been presented features of a time course of investigated parameters for each month and year in the whole due to the continuously observations since 1982-2000. The scientific problem consists that there are no existed models which authentically would be cover the main aspects of a realities specified changes: they are identified by economic activities. growth of the population and other features of development of a human society or internal fluctuations of biogeophysical/climatic system. Possibilities of predictability of biosphere and climate changes depend on available timely supervision. adequacy of construction of appropriate models. understanding of mechanisms of direct and feedback influences in such complicated systems.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.140-148
• /
• 2013

The purpose of this study is to examine the current status of allergic diseases associated with the housing environment and the psychological attitude of residents towards relevant risk factors. This study surveyed 1,200 people. In the first round, 200 participants were questioned through direct survey methods, while 1,000 participants filled out an online survey in the second round. Selected study subjects consisted of allergic diseases known to be closely related to housing environment factors. With advice from medical experts, the analysis included the examination of the prevalence status regarding five types of allergy-related diseases-allergic conjunctivitis, allergic rhinitis, allergic dermatitis, asthma and headache-with the range of disease incidence set within the past ten years. The survey was conducted on all age groups except those nine years old and younger, and the findings are as follows. Allergic diseases were found to be more prevalent among women than men. Residents identified effective methods for the alleviation and treatment of allergic diseases as ventilation, use of environmentally-friendly finishing materials, maintenance of a clean living space through cleaning or washing, and sunlight exposure. Residents' understanding of allergic diseases varied depending on their experience with such diseases and residential characteristics.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.352-356
• /
• 2014

Purpose: We estimated the dietary qualities of green soybean (edamame) by using a specialized NIR transmission spectrometer to determine the constitutive properties of the soybean, such as the sucrose content and ninhydrine reaction quantity (NRQ; defined by the ninhydrine reaction, which has a high positive correlation with the total free amino acids), with the purpose of establishing a quality assurance system. Methods: We used a newly developed spectrometer probe that enables in situ estimation of the constituents of the soybean. Results: The calibration results obtained using a wavelength range of 760-960 nm were characterized by $R^2$ = 0.57 and standard error of cross-validation (SECV) of 0.78% for sucrose, and $R^2$ = 0.59 and SECV = 0.35% for NRQ. Conclusions: These results are inferior to those of our previous study obtained using a specialized bench-type transmission spectrometer. The poorer results are attributed to several possible reasons, including the effect of direct sunlight and the unstable sample presentation. We plan to conduct further study using improved optical layout and sample presentation.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.402-405
• /
• 2006

Radiometric calibration of optical image data is necessary to convert raw digital number (DN) value of each pixel into a physically meaningful measurement (radiance). To extract rather quantitative information regarding biophysical characteristics of the earth surface materials, radiometric calibration is often essential procedure. A sensor detects the radiation of sunlight interacted atmospheric constituents. Therefore, the amount of the energy reaching at the sensor is quite different from the initial amount reflected from the surface. To achieve the target reflectance after atmospheric correct, an initial step is to convert DN value to at-sensor radiance. A linear model, the simplest radiometric model, is applied to averaged spectral radiance for this conversion. This study purposes to analyze the sensitivity of several factors affecting on radiance for carrying out absolute radiometric calibration of panchromatic images from KOMPSAT2 launched at July, 2006. MODTRAN is used to calculate radiance at sensor and reflectance of target is measured by a portable spectro-radiometer at the same time the satellite is passing the target for the radiometric calibration. As using different contents of materials composing of atmosphere, the differences of radiance are investigated. Because the spectral sensitivity of panchromatic images of KOMPSAT2 ranges from 500 to 900 nm, the materials causing scattering in visible range are mainly considered to analyze the sensitivity. According to the verified sensitivity, direct measurement can be recommenced for absolute radiometric calibration.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.2
• /
• pp.39-45
• /
• 2010

The color of object is a main role that people recognize outdoor entity with its shape. We can perceive the object due to the existence of light such as direct sunlight. Light is classified by wavelength into radio, microwave, infrared, the visible region we perceive as light, ultraviolet, X-rays and gamma rays. White light is all of the colors of light combined within the visible light spectrum. When white light is separated through a prism, we see the visible light spectrum. The various wavelengths of visible light are separated into colors. In this paper, we construct white light as the seven colors of rainbow and suggest the method of N-way color dispersion photon mapping to simulate the natural dispersion phenomenon.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.87-93
• /
• 2013

As the progress regarding spatial analysis on features such as landscape, sunlight, shadow, and direct ray using 3D simulation, it is required to research the creation of 3D terrain models crucial for 3D simulations. In this paper, we suggested the methods to create the 3D terrain model for the state after development, by transfer the 2D plan to 3D terrain model using the normal equation. Automated algorithm producing 3D terrain model from 2D plan was developed. And It is expected to be needed more studies detailed.