• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.106-110
• /
• 2017

Due to the plasma applied from the outside, which acts as an etchant during the etching process, considerable heat is transferred to the wafer and a separate cooling process is performed to effectively remove the heat after the process. In this case, a direct cooling method using a refrigerant is suitable for cooling through effective heat exchange. The direct cooling method using the refrigerant using the latent heat exchange is superior to the cooling method using the sensible heat exchange. Therefore, in this paper, AMESim is used to design a direct refrigerant cooling system using latent heat exchange simulator was built.The constructed simulator is reliable compared with the actual experimental results. It is expected that this simulator will help to design and search for optimal process conditions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2007

To establish the Fourier-transform infra-red spectrophotometry (FTIR) direct-on-filter(DOF) technique as a useful analytical method for quartz in respirable dust samples, influence of the interference should be corrected. This study was designed to compare three methods of correction for cristobalite when quantifying the content of quartz, including the least square, the optimum choice and the spectral subtraction methods. Respirable dust, created in a dust chamber containing the standard material of quartz, cristobalite was collected using a cyclone equipped with a 25 mm, $0.8{\mu}m$ pore size DM filter as a collection medium. The quartz weights overestimated about 100% when mixed of cristobalite by measure using 799 cm-1 absorption peak of quartz. The quartz weights appeared over estimated by optimum choice, spectral subtraction and least square method in mixtures of 33% cristobalite were 90.3%, 60.1% and about 4.3%, respectively. The least square method have been adopted to correction methods of cristobalite and satisfactory results have been obtained. The results of this study suggest that, when correcting for effect of cristobalite on quantitative analysis of quartz in respirable dust by FTIR direct-on-filter method, the least square method produce the most unbiased results compared with those of other correction methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1361-1375
• /
• 2013

The design flow considering nonstationarity is estimated to determine the design flood related to hydraulic structure quantitatively based on the design process for stream restoration in the Mokgamcheon watershed proposed by Lee et al. (2011). The purpose of this research is to suggest new ways that the design flood was calculated considering nonstationarity at the Mokgamcheon watershed. Storm-unit hydrograph method to calculate design flood and direct frequency analysis were applied and nonstationarity was considered for the frequency analysis through extRemes toolkit developed at NCAR (National Center for Atmospheric Research). Although the method of direct flood frequency analysis due to dealing with flowrates directly has a more reliable than strom-unit hydrograph method, as a result, the method of direct flood frequency analysis underestimated the design flood than strom-unit hydrograph method due to the characteristics of the flow data. Therefore, the flood of storm-unit hydrograph method (100 years frequency) was determined as the design flood in the Mokgamcheon watershed.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.127-134
• /
• 2008

Recently, it has developed that UCC (User Created Contents) is made and created by the users. The mainly issue of production of contents parts is how can make easier and paly the moving picture more useful. In this paper, for this, we implemented UCC production system using Direct Show which is included Direct X. Direct Show is a moving picture editing technique and has been supported in Microsoft with COM component. Our system has features that the various effects can be easily inserted into moving Picture by users. Moreover, our system can efficiently apply the effects at playing the moving picture differently from the frame processing method. We confirmed these merits through experiments. The proposed system can be used for commercial purposes which high efficiency is required such as advertisement movie.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.120-126
• /
• 1991

An expanded scheme of a direct numerical solution method for solving the Navier-Stokes equation considering the modified boundary conditions for gas lubrication with ultra low clearance at high .LAMBDA. region is presented. Many examples are calculated by this scheme and their results are compared to the previous solutions using P$^{2}$H$^{[-992]}$ . This scheme has the advantages of fast calculation time and stable convergence in high .LAMBDA. region, and gives very good results in the case of fluid film thickness discontinuity.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.4 s.148
• /
• pp.484-493
• /
• 2006

Recently, direct load analysis using ship motion program is required to confirm structural safety for the Post-Panamax class large container carrier. However, there is no exact comparative study data for structural response between 20 and 30 wave load. So, in this paper, to compare the hull girder stress response between 20 versus 3D wave load calculation method, direct load analysis and global F.E analysis have been performed for three kinds of large container vessels using each 20 and 30 wave load calculation program. The results of 2D wave load RAO(Response Amplitude Operator) of each dominant load parameter(vertical, torsional and horizontal moment) are generally bigger than that of 30 results, especially in vertical wave bending moment. And the results of structural analysis based on the equivalent design wave method shows that there is a big difference in view of stress, but the stress distribution is very similar for each wave load case.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.179-185
• /
• 2008

In this paper, an advanced torque control scheme of SRM using DITC(Direct Instantaneous Torque Control) and PWM(pulse width modulation) is presented. Different from conventional DITC method, proposed method uses one or two switching modes at every sampling time, instead of only one switching mode. The duty ratio of the phase switch is regulated according to the torque error and simple control rules of DITC. Moreover the sampling time of control can be extended, which allows implementation on low cost micro-controllers. A simple calculation of PWM can assure a constant switching frequency with an excellent control performance. The proposed control method is verified by the simulations and experimental results.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.219-227
• /
• 1996

The purpose of this research is to develop the technology for the synthesis of (Ti,Al)N powder, which shows simultaneously the excellent properties of TiN and AlN, from the Ti-Al intermetallic compounds by the direct nitriding method. The effects of variables such as temperature, Ti-Al intermetallic compounds ($TiAl_3$, TiAl and $Ti_3Al$) were investigated by TG, XRD and SEM. The (Ti,Al)N powder can be easily synthesized from the intermetallic compounds by the direct nitriding method. Among the intermetallic compounds, the nitriding behavior increased with TiAl> $Ti_3Al$ > $TiAl_3$, as the difference of diffusion coefficient for nitrogen in each materials. The ternary nitride such as $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the direct nitriding method, although the ternary nitride coexist with TiN and AlN. The ternary nitrides are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN and AlN above $1400^{\circ}C$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.45-52
• /
• 2000

Nowadays, there are a lot of evidence that mutation of the p53 tumor suppressor gene is one of the most common genetic abnormalities in neoplastic progression. In this study, we analyzed 20 specimens of oral tumors(squamous cell carcinoma 14 cases, ameloblastoma 3 cases, adenoid cystic carcinoma 2 cases, malignant schwannoma 1 case)using polymerase chain reaction and direct sequencing which used an automated DNA sequencer and software for detection of mutations. Polymerase chain reactions were performed with 4 sets of primers encompassing exon 5, 6, 7, 8, and direct sequencing method was employed. The results were as followings. 1. We detected 10 point mutations out of 20 specimens (50%). 2. The genetic alterations included 7 mis-sense mutations resulting in single amino acid subtitutions, 2 silent mutations, 1 non-sense mutations encoding a stop codon. 3. Mutations were mostly in exon 7(7 out of 10 mutations, 70%) and involved codons 225, 234, 235, 236, 238, 247. 4. Therse were 4 cases of $T{\rightarrow}A$ transversion, 2 cases of $C{\rightarrow}A$ transversion, $A{\rightarrow}G$ transition, 1 case of $C{\rightarrow}G$, $T{\rightarrow}G$ transversion respectively. 5. We could find out point mutations more conveniently using PCR - Automated Direct Sequencing method.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.10
• /
• pp.33-43
• /
• 2018

In this paper, we propose a method to automatically generate the description of an RDF graph structure. The description is expressed in Shape Expression Language (ShEx), which is developed by W3C and provides the syntax for describing the structure of RDF data. The RDF graphs to which this method can be applied are limited to those generated by the direct mapping, which is an algorithm for transforming relational data into RDF by W3C. A relational database consists of its schema including integrity constraints and its instance data. While the instance data can have been published in RDF by some standard methods such as the direct mapping, the translation of the schema has been missing so far. Unlike the users on relational databases, the ones on RDF datasets were forced to write repeated vague SPARQL queries over the datasets to acquire the exact results. This is because the schema for RDF data has not been provided to the users. The ShEx documents generated by our method can be referred as the schema on writing SPARQL queries. They also can validate data on RDF graph update operations with ShEx validators. In other words, they can work as the integrity constraints in relational databases.