• Tribology and Lubricants
• /
• 제14권1호
• /
• pp.23-27
• /
• 1998

The characteristics of friction in direct acting OHC vane train system have been investigated by the comparison of experimental and theoretical results. A modified friction model was presented to calculate the friction force at cam/tappet contact. A simple experimental system was evaluated to measure the friction force and the camshaft driving torque. The friction force was measured by using the dynamic loadcell. Good agreement was found between theoretical and experimental results in friction force, but there was a little difference in driving torque.

• 한국지반공학회논문집
• /
• 제25권4호
• /
• pp.105-112
• /
• 2009

본 연구에서는 낙동강 모래의 내부마찰각과 모래와 건설재료들과의 접촉면에서 발생되는 표면마찰각의 특성을 파악하기 위하여 모래의 상대밀도와 전단속도를 변화시켜 목재, 강재, 몰탈, 그리고 역청재와 일련의 직접전단시험을 실시하였다. 시험결과 모든 경우에서 모래의 내부마찰각이 건설재료와의 표면마찰각보다 항상 크게 나타났고, 전단속도가 빠를수록 마찰각이 조금 증가되었다. 모래의 간극비가 작아짐에 의한 조밀화에 따라 마찰각은 선형적으로 증가하였으며, 간극비와 상대밀도의 변화에 따라 마찰각을 산정할 수 있는 식을 제시하였다. 또한 건설재료의 표면거칠기는 표면마찰각에 있어 중요한 인자임을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.813-820
• /
• 2003

The shear friction tests using large direct shear test units were performed to evaluate the friction properties of fiber-mixed soil. The used materials and test conditions were flowing. Soils : SM and ML; mixing fibers : three types of polypropylene fibers(net type 38mm and 60mm, and line type 60mm), reinforcement : geogrid; mixing ratio：0.2% and 0.3%; degree of compaction : 85% and 95%. In the test results, the reinforcing effect of fiber mixed soil was confirmed.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.96-106
• /
• 2008

We review a series of studies on turbulent skin friction drag reduction in wall-turbulence recently conducted in Japan. First, an identity equation relating the skin friction drag and the Reynolds shearstress (the FIK identity) is introduced. Based on the implication of the FIK identity, a new analytical suboptimal feedback control law requiring the streamwise wall-shear stress only is introduced and direct numerical simulation (DNS) results of turbulent pipe flow with that control is reported. We also introduce DNS of an anisotropic compliant surface and parameter optimization using an evolutionary optimization technique.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.347-354
• /
• 2008

We introduce a series of studies on turbulent skin friction drag reduction in wall-turbulence. First, an identity equation relating the skin friction drag and the Reynolds shear stress (the FIK identity) is introduced. Based on the implication of the FIK identity, a new analytical suboptimal feedback control law requiring the streamwise wall-shear stress only is introduced and direct numerical simulation (DNS) results of turbulent pipe flow with that control is reported. We also introduce DNS of an anisotropic compliant surface and parameter optimization using an evolutionary optimization technique.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.347-354
• /
• 2008

We introduce a series of studies on turbulent skin friction drag reduction in wall-turbulence. First, an identity equation relating the skin friction drag and the Reynolds shear stress (the FIK identity) is introduced. Based on the implication of the FIK identity, a new analytical suboptimal feedback control law requiring the streamwise wall-shear stress only is introduced and direct numerical simulation (DNS) results of turbulent pipe flow with that control is reported. We also introduce DNS of an anisotropic compliant surface and parameter optimization using an evolutionary optimization technique.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.104-113
• /
• 1995

Shear strength of the discontinuity on which the pre-failure of rock slope was occurred during surface excavation was measured through the direct shear test using core samples obtained in-situ. Internal friction angle was increased as the roughness of discontinuity surface(JRC) was increased. Results of the tilt test using core samples of higher JRC also showed very similar trend as those of the direct shear test. When the samples replicated from natural cores were used int he tilt test, results of friction angles showed almost perfect continuation of the residual friction angles from the direct shear test. However, when the gouge material existed in the discontinuity the internal friction angle strongly depended upon the rate of filling thickness to the height of asperity irrespective of the JRC. Based on the results of both direct shear test and tilt test internal friction angle and cohesion of discontinuity, which reflect the in-situ conditions fo pre-sliding failure and also can be used for the optimum design of support system, were assessed. Two kinds of support measures which were expected to increase the stability of rock slope were considered; lowering of slope face angle and installation of rock cable. But, it was found that the first method might lead to more unstable conditions of rock slope when the cohesion of discontinuity plane was negligibly low and in that case the support systems of any kind which could exert actual resisting force were needed to ensure the permanent stability of rock slope.

• 한국농공학회지
• /
• 제23권3호
• /
• pp.96-104
• /
• 1981

In order to investigate the characteristics of the shear strength of the unsaturated cohesive soils which has mean characters of sand and clay widely used for banking, I selected soil samples from An-sung district and, against it, performed direct shear test and unconfined compression test changing grain size, compaction energy and moisture content and also performed triaxial compression test under optimum moisture content. The results are as follows; 1.As the passing percent of the No. 200 sieve increased from 23.6% to 56.1%, cohesion increased from 0. 202kg/cm2 to 0. 398kg/cm2 under the direct shear test and from 0.38 kg/cm2 to 1. 05kg/cm2 under the tria4al compression test, internal friction angle decreased from 44. 78$^{\circ}$ to 34. 34$^{\circ}$ under the direct shear test and from 31. 88$^{\circ}$ to 13. 31$^{\circ}$ under the triaxial compression test. 2.Cohesion showed it's maximum value around OMC and internal friction angle showed a tendency to increase according to the decrease of water content but it's increasing ratio was relatively slow. 3.Decreasing ratio of cohesion and internal friction angle was relatively sensitive according to the decrease of compaction energy. 4.The smaller of the vertical stress and the coarser of the grain size of samples, changing of the volume showed a tendency to increase and as the increase of water content, the shear displacement (dh) at failure shear stress ($\tau$f) showed maximum and the $\tau$f-dh curve was gentle. 5.To synthesize the results of the direct shear test and the triaxial compression test, cohesion showed higher under the triaxial compression test and internal friction angle showed a tendeney to appear higher under the direct shear test. It seems that we can get correspondent results by removing the side friction of mold with soils and adjusting the vertical stress and shearing speed under the direct shear test.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.299-306
• /
• 1997

• 지질공학
• /
• 제29권4호
• /
• pp.565-578
• /
• 2019

황등 화강암, Berea 사암, 정선 대리암, 홍천 편마암, 풍암 셰일 및 음성 사질 셰일의 여섯 종류의 암석에 대하여 직접전단시험, 기울임시험 그리고 당김시험을 이용하여 기본마찰각을 측정하고, 암종에 따른 기본마찰각의 특성, 시험방법의 정확성을 비교, 검토하여 기본마찰각 측정에 가장 정확하고 효율적인 시험방법을 제시하였다. 기본마찰각은 직접전단시험을 이용하면 정확하게 측정되지만, 비싼 장비와 복잡한 시험절차가 필요하다. 국제암반역학회에서 표준시험법으로 제안한 기울임시험은 직접전단시험에서 측정된 기본마찰각과 유사한 값을 제시하나, 동일한 암석으로 제작된 3개의 시료에서 측정된 기본마찰각은 최대 7° 이상의 오차를 보이고, 1개의 시료에서 5회 측정된 미끄러짐 각 또한 시료에 따라서 증가하거나, 감소하거나, 유사한 값을 보이는 등 일정한 패턴을 보이지 않고 변할 뿐만 아니라, 편마암에서는 최대 12°의 오차를 보여 시험의 신뢰성에 상당한 의문이 든다. 간단한 시험장비와 비교적 낮은 수직응력하에서 실시되는 당김시험은 직접전단시험에서 구한 기본마찰각과 매우 유사한 값을 제공하고, 측정된 값들이 일관성을 보이고 시험절차 또한 매우 간단하여 기본마찰각 측정에 가장 유용한 시험 방법으로 판단된다.