• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.152-158
• /
• 2019

This study was conducted to develop and prove the effects of an agronomical pest control measure on ginseng cultivated by direct seeding in paddy field, and the results obtained are as follows. Decomposition of ginseng in field during overwintering was due to gray mold rot caused by Botrytis cinerea, which occurred in October or November of 2016 and intensified in February and March the following year. The occurrence rate of gray mold rot based on shading materials was 6.5%, 16.8%, and 29.5% with light-proof paper, PE shade net, and rice straw shade, respectively. The initial infection occurred in the leaves prior to wintering and secondary infection occurred in the stems after wintering. The rate of screrotium formation by gray mold in the above-ground parts of ginseng tended to increase: 26.6% on October 20, 33.7% in November 20, and 41.8% on December 20. The force needed to remove the leaves and stems from withered ginseng was 0.2, 0.94, 2.5, and 5 kg for 1-, 2-, 3-, and 4- and 5-year holds; the force required was 1 kg after wintering, making it relatively easy to remove. The disease incidence rate after the removal of leaves and stems was 2.5%, 1.2%, and 2.2% in 4-, 5-, and 6-year-old plants, respectively, and a disease high incidence rate of 8.8%, 13.0%, and 18.2%, respectively, was seen when the leaves and stems were not removed. In both transplanting and direct seeding, the miss-planted rate decreased and the germination rate increased when shading material was removed and the surface of ridge was covered with soil or vinyl.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.179-184
• /
• 2013

BACKGROUND: Accurate estimates of total direct $CH_4$ emissions from croplands on a country scale are important for global budgets of anthropogenic sources of $CH_4$ emissions and for the development of effective mitigation strategies. Methane production resulted by the anaerobic decomposition of organic compounds where $CO_2$ acts as inorganic electron acceptor. This process could be affected by the addition of rice straw, water management and rice variety itself. METHODS AND RESULTS: Rice (Oryza sativa L. Japonica type, var Samkwangbyeo) was cultivated in four plots: (1) Nitrogen-Phosphorus-Potassium (NPK) ($N-P_2O_5-K_2O$:90-45-57 kg/ha); (2) NPK plus 3 Mg/ha rice straw (RS3); (3) NPK plus 5 Mg/ha rice straw (RS5); (4) NPK plus 7 Mg/ha rice straw (RS7) for 3 years (2010-2012) and the rice straw incorporated in fall (Nov.) in Gyeonggi-do Hwaseong-si. Gas samples were collected using the closed static chamber which were installed in each treated plot of $152.9m^2$. According to application of 3, 5, 7 Mg/ha of rice straw, methane emission increased by 46, 101, 190%, respectively, compared to that of the NPK plot. CONCLUSION(S): We obtained a quantitative relationship between $CH_4$ emission and the amount of rice straw applied from rice fields which could be described by polynomial regression of order 2. The emission scaling factor estimated by the relationship were in the range of IPCC GPG (2000).

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.251-259
• /
• 1987

Humic acids extracted from decomposing plant residues were characterized by infrared(IR) spectra. The IR spectra were further interpreted by chemical analyses for oxygen-containing functional groups such as carboxyl, phenolic, alcoholic, carbonyl, and quinionic groups. 1. The IR spectra obtained in this study were divied into three categories: spectra of humic acids from grain crop straws of rice, barley, wheat and rye produced Type I, while that from wild grass hay yielded Type II, and those from forest tree litter of the deciduous and conifers were led to give Type III. 2. There were no significant changes in the absorption bands observed among humic acids extracted at various stages of decomposition of a given Plant material. 3. The absorption band at about $3,430cm^{-1}$ represents the presence of hydrogen-bonded hydroxyl groups, phenolic-OH groups being the major component. 4. A close relationship was found between the total acidity and the content of phenolic-OH groups of humic acids. The content of carboxyl groups maintains a direct relationship with the content of total hydroxyl groups, and such a close relationship also exists between the content of alcoholic hydroxyls and that of total hydroxyl groups. 5. Overlapping of the absorption bands of carbonyl groups and quinones renders it difficult to make differentiation between the two. 6. A variety of non-armoatic cyclic hydrocarbons appears to be a structural component as evidenced by a sharp absorption peak near $995-1000cm^{-1}$.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.43-71
• /
• 1999

This research is an experimental work of developing a construction material using municipal wastewater sludge as liner and cover materials for waste disposal landfill. Weathered granite soil and flyash, produced as a by-product in the power plant, were used as the primary additives to improve geotechnical engineering properties of sludge. For secondary additives, bentonite and cement were mixed with sludge to decrease the permeability and to increase the shear strength, respectively. Various laboratory test required to evaluate the design criteria for liner and cover materials, were carried out by changing the mixing ratio of sludge with the additives. Basic soil properties such as specific gravity, grain size distribution, liquid and plastic limits were measured to analyze their effects on permeability, compaction, compressibility and shear strength properties of mixtures. Laboratory compaction tests were conducted to find the maximum dry densities and the optimum moisture contents of mixtures, and their effectiveness of compaction in field was consequently evaluated. Permeability tests of variable heads with compacted samples, and the stress-controlled consolidation tests with measuring permeabilities of samples during consolidation process were performed to obtain permeability, and to find the compressibility as well as consolidational coefficients of mixtures, respectively. To evaluate the long term stability of sludges, creep tests were also conducted in parallel with permeability tests of variable heads. On the other hand, for the compacted sludge decomposed for a month, permeability tests were carried out to investigate the effect of decomposition of organic matters in sludges on its permeability. Direct shear tests were performed to evaluate the shear strength parameters of mixed sludge with weathered granite, flyash and bentonite. For the mixture of sludge with cement, unconfined compression tests were carried out to find their strength with varying mixing ratio and curing time. On the other hand, CBR tests for compacted specimen were also conducted to evaluate the trafficability of mixtures. Various test results with mixtures were assessed to evaluate whether their properties meet the requirements as liner and cover materials in waste disposal landfill.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.47-75
• /
• 2009

Recently, researches on Management Information Systems (MIS) have laid out theoretical foundation and academic paradigms by introducing diverse theories, themes, and methodologies. Especially, academic paradigms of MIS encourage a user-friendly approach by developing the technologies from the users' perspectives, which reflects the existence of strong causal relationships between information systems and user's behavior. As in other areas in social science the use of structural equation modeling (SEM) has rapidly increased in recent years especially in the MIS area. The SEM technique is important because it provides powerful ways to address key IS research problems. It also has a unique ability to simultaneously examine a series of casual relationships while analyzing multiple independent and dependent variables all at the same time. In spite of providing many benefits to the MIS researchers, there are some potential pitfalls with the analytical technique. The research objective of this study is to provide some guidelines for an appropriate use of SEM based on the assessment of current practice of using SEM in the MIS research. This study focuses on several statistical issues related to the use of SEM in the MIS research. Selected articles are assessed in three parts through the meta analysis. The first part is related to the initial specification of theoretical model of interest. The second is about data screening prior to model estimation and testing. And the last part concerns estimation and testing of theoretical models based on empirical data. This study reviewed the use of SEM in 164 empirical research articles published in four major MIS journals in Korea (APJIS, ISR, JIS and JITAM) from 1991 to 2007. APJIS, ISR, JIS and JITAM accounted for 73, 17, 58, and 16 of the total number of applications, respectively. The number of published applications has been increased over time. LISREL was the most frequently used SEM software among MIS researchers (97 studies (59.15%)), followed by AMOS (45 studies (27.44%)). In the first part, regarding issues related to the initial specification of theoretical model of interest, all of the studies have used cross-sectional data. The studies that use cross-sectional data may be able to better explain their structural model as a set of relationships. Most of SEM studies, meanwhile, have employed. confirmatory-type analysis (146 articles (89%)). For the model specification issue about model formulation, 159 (96.9%) of the studies were the full structural equation model. For only 5 researches, SEM was used for the measurement model with a set of observed variables. The average sample size for all models was 365.41, with some models retaining a sample as small as 50 and as large as 500. The second part of the issue is related to data screening prior to model estimation and testing. Data screening is important for researchers particularly in defining how they deal with missing values. Overall, discussion of data screening was reported in 118 (71.95%) of the studies while there was no study discussing evidence of multivariate normality for the models. On the third part, issues related to the estimation and testing of theoretical models on empirical data, assessing model fit is one of most important issues because it provides adequate statistical power for research models. There were multiple fit indices used in the SEM applications. The test was reported in the most of studies (146 (89%)), whereas normed-test was reported less frequently (65 studies (39.64%)). It is important that normed- of 3 or lower is required for adequate model fit. The most popular model fit indices were GFI (109 (66.46%)), AGFI (84 (51.22%)), NFI (44 (47.56%)), RMR (42 (25.61%)), CFI (59 (35.98%)), RMSEA (62 (37.80)), and NNFI (48 (29.27%)). Regarding the test of construct validity, convergent validity has been examined in 109 studies (66.46%) and discriminant validity in 98 (59.76%). 81 studies (49.39%) have reported the average variance extracted (AVE). However, there was little discussion of direct (47 (28.66%)), indirect, and total effect in the SEM models. Based on these findings, we suggest general guidelines for the use of SEM and propose some recommendations on concerning issues of latent variables models, raw data, sample size, data screening, reporting parameter estimated, model fit statistics, multivariate normality, confirmatory factor analysis, reliabilities and the decomposition of effects.