• 제목/요약/키워드: Direct conversion receiving element

검색결과 4건 처리시간 0.016초

전력제어 직접변환수신 6단자 소자 설계 및 제작 (Design and implementation of power-controlled front-end module for direct conversion receiver)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제14권11호
    • /
    • pp.2391-2396
    • /
    • 2010
  • 본 논문에서는 국부발전 신호와 수신 RF 신호 전력을 제어할 수 있는 전력제어 6단자 소자를 구성하고 설계 제작하였다. 가변적인 6단자 수신 신호 전력을 제어하여 일정한 전력 세기를 갖는 6단자 소자 출력 신호로 유지하여 전력 검파기의 포화 및 성능 열화를 방지할 수 있는 직접변환 6단자 구조를 제안하였다. 이를 위하여 직접변환 수신방식의 성능을 개선하고 유지할 수 있는 전력제어 6단자 소자를 해석하고, 전력제어 소자와 6단자 소자를 구현하였다. 제작된 전력제어 6단자소자는 1.69 GHz주파수 대역에서 36 dB의 전력 제어와 약 1.6 dB 이내의 이득차, 그리고 약 $4^{\circ}$ 이내의 위상차를 갖는 양호한 수신 전처리기 성능을 나타내었다.

집중 소자형 6단자 위상 상관기 설계와 집중 소자형 직접변환 수신 성능 (Design of lumped six-port phase correlator and performance of lumped direct conversion receiver)

  • 유재두;김영완
    • 한국정보통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.1071-1077
    • /
    • 2010
  • 본 논문에서는 집중 소자형 6단자 위상 상관기 구조를 설계 제작하고, 이를 바탕으로 집중 소자형 6단자 위상 상관기를 이용한 L-대역 직접변환 수신 성능을 분석하였다. 제작된 L-대역 집중 소자형 6단자 위상 상관기 소자는 저항형 전력 분배기와 twist-wire 동축케이블을 사용하였으며, 낮은 대역에서 소형화 구조가 가능하고, 광역 특성을 갖는다. 집중 소자형 6단자 위상 상관기를 사용한 L-대역 직접변환 수신 성능은 집중 소자형 6단자 위상 상관기의 LO 단자와 RF 입력 단자에 각각 중심 주파수가 1.69 GHz이고 전력이 -20 dBm인 LO 신호와 QPSK 신호를 입력하여 측정하였다. 집중 소자형 6단자 위상 상관기를 사용한 직접변환 구조는 양호한 I/Q 디지털 신호를 복원할 수 있었다.

Pipeline defect detection with depth identification using PZT array and time-reversal method

  • Yang Xu;Mingzhang Luo;Guofeng Du
    • Smart Structures and Systems
    • /
    • 제32권4호
    • /
    • pp.253-266
    • /
    • 2023
  • The time-reversal method is employed to improve the ability of pipeline defect detection, and a new approach of identifying the pipeline defect depth is proposed in this research. When the L(0,2) mode ultrasonic guided wave excited through a lead zirconate titinate (PZT) transduce array propagates along the pipeline with a defect, it will interact with the defect and be partially converted to flexural F(n, m) modes and longitudinal L(0,1) mode. Using a receiving PZT array attached axisymmetrically around the pipeline, the L(0,2) reflection signal as well as the mode conversion signals at the defect are obtained. An appropriate rectangle window is used to intercept the L(0,2) reflection signal and the mode conversion signals from the obtained direct detection signals. The intercepted signals are time reversed and re-excited in the pipeline again, result in the guided wave energy focusing on the pipeline defect, the L(0,2) reflection and the L(0,1) mode conversion signals being enhanced to a higher level, especially for the small defect in the early crack stage. Besides the L(0,2) reflection signal, the L(0,1) mode conversion signal also contains useful pipeline defect information. It is possible to identify the pipeline defect depth by monitoring the variation trend of L(0,2) and L(0,1) reflection coefficients. The finite element method (FEM) simulation and experiment results are given in the paper, the enhancement of pipeline defect reflection signals by time-reversal method is obvious, and the way to identify pipeline defect depth is demonstrated to be effective.

메타물질 구조 다중대역 6단자 위상상관기 설계 및 제작 (Design and fabrication of multi-band six-port phase correlator using metamaterial)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제14권12호
    • /
    • pp.2615-2621
    • /
    • 2010
  • 본 논문에서는 메타물질 구조 다중대역 6단자 위상상관기를 설계하고 제작하였다. 이중 주파수 대역에서 신호를 수신 처리할 수 있는 집중소자형 메타물질 구조를 해석하고, 해석된 결과를 기반으로 다중대역 직접변환 수신 전처리기에 적합한 소형화 메타물질 구조 6단자 위상상관기를 제안하고 구현하였다. 다중대역 6단자 위상상관기를 구성하는 저항성 전력 분배기와 메타물질 $90^{\circ}$ 하이브리드 결합기의 산란 계수를 기반으로 동일한 특성을 갖는 6단자 위상상관기 구성 요소를 제작하고 측정하였다. 측정된 메타물질 구조 6단자 위상상관기는 모의실험 결과와 일치하였으며, 이중 주파수 대역에서 -20 dB 이하의 정합과 1 dB 이내의 전달 이득차, 그리고 ${\pm}4.1^{\circ}$ 이하의 전달 위상차 특성으로 양호한 다중대역 6단자 위상상관기 성능을 나타내었다.