• 한국컴퓨터그래픽스학회논문지
• /
• 제24권2호
• /
• pp.29-40
• /
• 2018

직접볼륨렌더링(DVR)은 3차원 볼륨 데이터의 내부 구조를 시각화하는 데 일반적으로 사용되는 방법이다. 그러나, 2차원 디스플레이 상의 기존의 볼륨 렌더링은 광선 투사법에 의한 차원 감소로 인해 깊이 인식이 부족하다. 본 연구에서는 가상현실이 볼륨렌더링의 유용성을 어떻게 향상시킬 수 있는지 조사한다. 우리는 가상 현실에서 실시간 고해상도 볼륨렌더링 시스템을 개발하고 38명의 참가자를 통한 사용자 연구를 통해 깊이 인식의 향상에 따른 볼륨렌더링의 유용성을 측정한다. 결과는 가상 현실이 뛰어난 깊이 인식을 가능하게 함으로써 볼륨렌더링의 유용성을 향상 시킨다는 것을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.93-94
• /
• 2006

In this research, the enhancement of electron-transfer activity of hemoglobin (Hb) in dodecanoic acid film was investigated for the first time. This type of composite film was made on glassy carbon electrode by casting method. Cyclic voltammetric result of the modified electrode displays a well defined redox peaks which was attributed to the direct electrochemical response of Rb. Our results illustrate that Rb exchange electrons directly with electrode and exhibits the characteristics of peroxidase. When we apply this modified electrode as a biosensor, it gives excellent performances in the electrocatalytic reduction of hydrogen peroxide ($H_{2}O_{2}$). Through the optimal conditions, the proposed biosensor shows the linear range for H2O2 determination was from $1{\times}10^{-5}$ to $1.25{\times}10^{-4}mol/L$ with a detection limit of $1{\times}10^{-7}mol/L$. The biosensor retained more than 90% of the initial response after 14 days.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.334-340
• /
• 2003

In order to fabricate new sustained delivery device of nerve growth factor (NGF), we developed NGF-loaded biodegradable poly(L-lactide-co-glycolide) (PLGA, the mole ratio of lactide to glycolide 75:25, molecular weight: 83,000 and 43,000 g/mole, respectively) film by novel and simple sandwich solvent casting method for the possibility of the application of neural tissue engineering. PLGA was copolymerized by direct condensation reaction and the molecular weight was controlled by reaction time. Released behavior of NGF from NGF-loaded films was characterized by enzyme linked immunosorbent assay (ELISA) and degradation characteristics were observed by scanning electron microscopy (SEM) and gel permeation chromatography (GPC). The bioactivity of released NGF was identified using a rat pheochromocytoma (PC-12) cell based bioassay. The release of NGF from the NGF-loaded PLGA films was prolonged over 35 days with zero-order rate of 0.5-0.8 ng NGF/day without initial burst and could be controlled by the variations of molecular weight and NGF loading amount. After 7 days NGF released in phosphate buffered saline and PC-12 cell cultured on the NGF-loaded PLGA film for 3 days. The released NGF stimulated neurite sprouting in cultured PC-12 cells, that is to say, the remained NGF in the NGF/PLGA film at 37 $^{\circ}C$ for 7 days was still bioactive. This study suggested that NGF-loaded PLGA sandwich film is released the desired period in delivery system and useful neuronal growth culture as nerve contact guidance tube for the application of neural tissue engineering.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.81-86
• /
• 1998

The light aggregates were fabricated by sintering green bodies made form the fly ash-clay alip. The content of fly ashes in the slip could be increased up to 70wt.% due to controlled rheological behavior of the slip, and the green body of uniform microstructure could be obtained by DCC(Direct Coagulation Casting)method. The apparent density, microstructure and compressive strength for sintered bodies fired at 1100∼1200$^{\circ}C$ were evaluated. The properties of light aggregates fabricated depend on slip density, particle behavior in the slip and sintering conditions. The sintered body prepared by firing a green body made from slip of density 1.60 at 1150$^{\circ}C$/2hr satisfied conditions of a light aggregate as apparent density of 1.49${\pm}$0.02 and compressive strength of 584${\pm}$62kg/$\textrm{cm}^2$.

• 한국CDE학회논문집
• /
• 제8권3호
• /
• pp.167-174
• /
• 2003

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the measurement of the mold of the shoes in use, the modeling by CAD/CAM system, the generation of NC data and the machining by CNC machining center. The machining has been performed from the data type obtained from 3-dimensional measurement points of mold in use. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method has proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• 소성∙가공
• /
• 제27권6호
• /
• pp.379-385
• /
• 2018

This study investigated the effect of extrusion conditions on microstructures and mechanical properties of AM80 magnesium alloys. The billets of magnesium alloy used for hot extrusion were prepared by permanent mold casting method, and its extrusion was hot direct extrusion with different extrusion conditions. The results of microstructural analysis showed that the main phases in the as-casted alloys were ${\alpha}-Mg$, ${\beta}-Mg_{17}Al_{12}$, and lamella $Mg_{17}Al_{12}$. Hot extrusion results, The tensile strength of the most soundly manufactured extruded bars (extrusion temp: $350^{\circ}C$, extrusion ratio: 27:1, ram speed: 2mm/s) was approximately 327MPa at room temperature. The increase in the mechanical properties of hot-extruded alloys was as a result of grain refinement by dynamical recrystallization during hot extrusion.

• Design & Manufacturing
• /
• 제16권3호
• /
• pp.58-65
• /
• 2022

Micro-fluidic chip has been fabricated by lithography process on silicon or glass wafer, casting using PDMS, injection molding of thermoplastics or 3D printing, etc. Among these processes, 3D printing can fabricate micro-fluidic chip directly from the design without master or template for fluidic channel fabricated previously. Due to this direct printing, 3D printing provides very fast and economical method for prototyping micro-fluidic chip comparing to conventional fabrication process such as lithography, PDMS casting or injection molding. Although 3D printing is now used more extensively due to this fast and cheap process done automatically by single printing machine, there are some issues on accuracy or surface characteristics, etc. The accuracy of the shape and size of the micro-channel is limited by the resolution of the printing and printing direction or layering direction in case of SLM type of 3D printing using UV curable resin. In this study, the printing direction and thickness of each printing layer are investigated to see the effect on the size, shape and surface of the micro-channel. A set of micro-channels with different size was designed and arrayed orthogonal. Micro-fluidic chips are 3D printed in different directions to the micro-channel, orthogonal, parallel, or skewed. The shape of the cross-section of the micro-channel and the surface of the micro-channel are photographed using optical microscopy. From a series of experiments, an optimal printing direction and process conditions are investigated for 3D printing of micro-fluidic chip.

• 멤브레인
• /
• 제19권4호
• /
• pp.291-301
• /
• 2009

친전자성 치환반응을 통하여 제조된 술폰화 단량체와 비(非)술폰화 단량체의 직접 중합법을 통하여 서로 다른 술폰화도를 나타내는 술폰화 폴리아릴에테르술폰 공중합체를 합성하고, 이들로부터 직접 메탄올 연료전지용 이중층(層) 고분자 전해질 막을 제조하였다. 우수한 이온 전도특성을 나타내는 술폰화도 50%의 공중합체를 사용하여 전해질 막의 모체(母體) 전도층을 제조하고, 이들의 한쪽 표면에 술폰화도 10%의 공중합체를 도포한 후 건조하여 낮은 메탄올 투과 특성의 코팅층을 형성시켰다. 도포되는 공중합체의 질량비를 5~20%로 조절함으로써 코팅 층 두께에 따른 전해질 막의 특성 변화를 고찰하였으며, 형성된 코팅 층을 막-전극 접합체의 음극 면에 접합시켜 운전 시 메탄올 연료와 직접 접촉하도록 하였다. 이중층 형성 공정을 통하여, 단일 전해질 막과 동등한 수준의 이온 전도 특성을 유지하면서도, 전해질 막을 통한 메탄올 투과 특성이 현저히 개선된 우수한 효율의 고분자 전해질 막 제조가 가능하였다. 작동 온도 $60^{\circ}C$, 2 M의 메탄올 공급 환경에서 수행된 연료 전지 성능 평가 결과, 막-전극 접합체 출력 밀도는 5%의 질량비에서 최대 $134.01\;mW/cm^2$였으며, 이로부터 상용 나피온 115 대비 105.5%의 향상된 성능 효율을 확인할 수 있었다.

• 멤브레인
• /
• 제18권4호
• /
• pp.282-293
• /
• 2008

친전자성 치환반응으로 제조된 술폰화 단량체, 비(非)술폰화 단량체 및 탄산칼륨을 이용하는 직접 중합법을 통하여 높은 점도의 술폰화 폴리아릴에테르술폰 공중합체를 합성하고, 이들을 원료로 N-메틸-2-피롤리돈(NMP)과 디메틸아세트아미드(DMAc)의 혼합 용매 상에서 직접 메탄을 연료전지용 고분자 전해질 막을 제조하였다. 막 제조 시의 용매 효과에 주목하여 혼합 용매의 부피 비는 $0{\sim}100%$로 변화시키고 공중합체의 술폰화도는 50%로 고정하였다. 이온 전도도 및 메탄올 투과도 측정을 통하여 최종 전해질 막의 기본 특성을 파악하고, 주사전자현미경 및 원자간력현미경분석을 통한 표면 분석 결과와 비교함으로써 이들의 상관관계를 고찰하였다. 막 제조 시의 용매 혼합 비율을 적절히 조절함에 따라 최종 전해질 막의 이온 전도도를 크게 향상시킬 수 있음이 확인되었는데, $25^{\circ}C$의 100% 가습 환경에서 측정된 수소 이온 전도도는 NMP : DMAc 50:50 부피/부피-%에서 최대 $1.38{\times}10^{-1}\;S/cm$이었다.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.237-245
• /
• 2016

시공이음부 발생에 따른 초고성능 콘크리트의 일체성을 확보하기 위해서는 그 특성을 수반함과 동시에 전단부착성능에 대한 정량적인 계면처리방법이 필요할 것으로 판단된다. 이에, 본 연구는 초고성능 콘크리트 타설 시, 발생하는 시공이음부의 부착성능을 확보하기 위한 일환으로서 시공이음부 계면처리방법에 따른 전단부착성능 평가를 통하여 재료적인 측면에서의 합리적인 계면처리방법을 도출하고자 한다. 초고성능 콘크리트 배합은 180MPa의 배합강도를 사용하였으며, 계면처리방법으로는 MN, AC, GR-10-0, GR-20-0, GR-30-0, SH-30-5, SH-30-10으로써 총 7수준으로 설정하였다. 실험체는 $150{\times}150{\times}150mm$의 Size로 제작 후, 전단부착강도 평가를 위하여 Direct shear test를 실시하였다. 실험결과, 시공이음부 접합면에 대해 계면처리를 실시한 경우 부착성능이 향상되는 것을 확인하였으며, 접합부 단면적이 증가할수록 초고성능 콘크리트의 일체성 확보에 유리할 것으로 판단된다. 또한 콘크리트의 일체성을 확보하기 위해서는 접합면 단면적의 비율 및 요철의 깊이, 개수 등이 적절히 고려되어야 할 것으로 판단된다.