• 한국강구조학회 논문집
• /
• 제25권5호
• /
• pp.487-495
• /
• 2013

국내 현실을 고려한 직접해석법 적용 방안의 제안을 위한 기초 연구로 국내의 강구조물 제작 및 설치시 적용되는 초기변형 허용값을 반영한 직접해석법 적용의 타당성을 해석적으로 평가하였다. 해석의 주요 변수로는 골조의 규모, 축력비, 축력분포, 가상하중 크기, 가상하중 가력 위치, 최소수평하중 개념 적용 여부 등을 적용하였다. 수치해석적 연구 결과 국내 초기변형 허용값인 L/700의 적용은 타당한 것으로 나타났으며, 이를 위한 방안으로 초기변형 허용값 L/700에 근거한 가상하중을 B2계수의 결과가 1.5 이하이고 수평하중이 존재하는 경우에라도 수평하중과 가상하중간에 최소수평하중 개념을 이용하여 층수평하중 형태로 가력하는 방법을 제안하였다.

• 대한임상검사과학회지
• /
• 제47권1호
• /
• pp.17-23
• /
• 2015

A fine needle aspiration biopsy (FNAB) is the primary means of distinguishing benign from malignant in thyroid nodules. However, between 10 and 30% of the FNABs of thyroid nodules are diagnosed as 'indeterminate'. A molecular method is needed to reduce unnecessary surgery in this group. In Korea, most thyroid cancer is classic papillary type and BRAFV600E mutation is highly prevalent. Thus, this study compared the pyrosequencing method with the conventional direct DNA sequencing and PCR-RFLP analysis and investigated the evaluation of preoperative BRAFV600E mutation analysis as an adjunct diagnostic method with routine FNABs. Sixty-five (78.3%) of 83 histopathologically diagnosed malignant nodule revealed positive BRAFV600E mutation on pyrosequencing analysis. In detail, 65 (83.8%) of 78 papillary thyroid carcinomas sample showed positive BRAFV600E mutation. None of 29 benign nodules had in pyrodequencing, direct DNA sequencing and PCR-RFLP. Out of 31 thyroid nodules classified as 'indeterminate' on cytological examination preoperatively, 28 cases turned out to be malignant: 24 papillary thyroid carcinomas. Among that, 16 (66.7%) classic papillary thyroid carcinomas had BRAFV600E mutation. Among 65 papillary thyroid carcinomas with positive BRAFV600E mutation detected by pyrosequencing analysis, each 3 cases and 5 cases did not show BRAFV600E mutation by direct DNA sequencing and PCR-RFLP analysis. Therefore, pyrosequencing was superior to direct DNA sequencing and PCR-RFLP in detecting the BRAFV600E mutation of thyroid nodules (p =0.027). Detecting BRAFV600E mutation by pyrosequencing was more sensitivity, faster than direct DNA sequencing or PCR-RFLP.

• 유통과학연구
• /
• 제16권1호
• /
• pp.59-71
• /
• 2018

Purpose - Recognizing the importance of small and medium enterprises and venture enterprises for the domestic economy, the purpose of the present study is to select factor termed export modes from among various export success strategies and factors that can help those enterprises secure export competitiveness in the world market to analyze the effects of export modes on the amounts of exports and periods until export after the foundation of those enterprises. Research design, data, and methodology - A structured questionnaire was used as a tool to derive the purpose of the study, and a questionnaire survey was conducted using a mobile survey technique that facilitated the distribution of questionnaire sheets and the collection of results. The main methodology used is crossover analysis, and the regression analysis technique was applied to verify the study results derived, thereby securing the reliability and validity of the final results derived. Results - Small and medium venture enterprises with shorter periods of time until the first export success after establishment adopted direct export modes more frequently, and those enterprises with larger amounts of the first export after establishment adopted direct export modes more frequently. The results of quantitative analysis, indicating that 66.1% of those enterprises with an export amount exceeding one billion won adopted direct export modes, can be said to support the foregoing. The crossover analysis results derived as such were reanalyzed using the PPML regression analysis technique to quantitatively identify that the amounts of the first export of enterprises that adopted direct export modes were larger than those of enterprises that adopted indirect export modes by 120%. Conclusions - The present study implies differentiated values in three aspects. First, the present study investigated and presented the export success factors and strategies of small and medium venture enterprises in a total of 14 countries in the Asian region, European region, North American region, African region, and South American region. Second, it intensively investigated five export modes to identify and verify that they were affecting the export success of small and medium venture enterprises. Third, based on the results of the investigation, the present study presented two marketing implications in the pragmatic aspect.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.370-376
• /
• 2009

The influence of magnetic saturation on electromagnetic field distribution in both a permanent-magnet direct-current (PMDC) motor and a field-winding (wound-field) direct-current (FWDC) motor, with the same output mechanical power, has been studied. In this paper, an approximate analytical method and time-stepping Finite Element Method (FEM) are used for prediction of Back-EMF and electromagnetic torque. No-load and rotor-lucked conditions, according to experimental measurements, and the FEM and analytical method studies of the motors have been considered. A sensitivity analysis has also been successfully accomplished on the major design parameters that affect motor performance. At last, these two DC motors are compared, in spite of their differences, on the basis of measured output characteristics.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권2호
• /
• pp.161-171
• /
• 1999

Aerodynamic sensitivity analysis codes are developed via the hand-differentiation using a direct differentiation method and an adjoint method respectively from discrete two-dimensional compressible Navier-Stokes equations. Unlike previous other researches, Baldwin-Lomax algebraic turbulence model is also differentiated by hand to obtain design sensitivities with respect to design variables of interest in turbulent flows. Discrete direct sensitivity equations and adjoint equations are efficiently solved by the same time integration scheme adopted in the flow solver routine. The required memory for the adjoint sensitivity code is greatly reduced at the cost of the computational time by allowing the large banded flux jacobian matrix unassembled. Direct sensitivity code results are found to be exactly coincident with sensitivity derivatives obtained by the finite difference. Adjoint code results of a turbulent flow case show slight deviations from the exact results due to the limitation of the algebraic turbulence model in implementing the adjoint formulation. However, current adjoint sensitivity code yields much more accurate sensitivity derivatives than the adjoint code with the turbulence eddy viscosity being kept constant, which is a usual assumption for the prior researches.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.54-66
• /
• 2002

A grid-based hydrological model, CELTHYM, capable of estimating base flow and surface runoff using only readily available data, was used to assess hydrologic impacts caused by land use change on Little Eagle Creek (LEC) in Central Indiana. Using time periods when land use data are available, the model was calibrated with two years of observed stream flow data, 1983-1984, and verified by comparison of model predictions with observed stream flow data for 1972-1974 and 1990-1992. Stream flow data were separated into direct runoff and base flow using HYSEP (USGS) to estimate the impacts of urbanization on each hydrologic component. Analysis of the ratio between direct runoff and total runoff from simulation results, and the change in these ratios with land use change, shows that the ratio of direct runoff increases proportionally with increasing urban area. The ratio of direct runoff also varies with annual rainfall, with dry year ratios larger than those for wet years shows that urbanization might be more harmful during dry years than abundant rainfall years in terms of water yield and water quality management.

• International Journal of Control, Automation, and Systems
• /
• 제2권2호
• /
• pp.238-246
• /
• 2004

In displaying a virtual wall using a passive haptic device equipped with passive actuators such as electric brakes, unsmooth motion frequently occurs. This undesirable behavior is attributed to time delay due to slowness in the virtual environment update and force approximation due to the inability of a brake to generate torque in arbitrary directions. In this paper a new control scheme called direct control is proposed to achieve smooth display on the wall-following task with a passive haptic device. In direct control, brakes are controlled so that the normal component of a resultant force at the end-effector vanishes, based on the force analysis at the end-effector of the passive haptic device using the passive FME (Force Manipulability Ellipsoid). Various experiments have been conducted to verify the validity of the direct control scheme with a 2-link passive haptic system.

• 소성∙가공
• /
• 제4권3호
• /
• pp.233-244
• /
• 1995

Rolling force in the direct rolling(or twin-roll strip continuous casting) process fo semi-solid material has been computed using rigid-viscoplastic finite element method. Temperature distributions for calculations of rolling force and roll deformation are obtained from thermofluid analysis. Three dimensional roll deformation analysis has also been performed by using commercial package ANSYS. From the results, behavior of metal flow, rolling force and roll deformation have been investigated according to the process conditions of semi-solid direct rolling.

• 한국통신학회논문지
• /
• 제31권10C호
• /
• pp.942-947
• /
• 2006

In this paper, a new feature representation technique called Improved 2-directional 2-dimensional direct linear discriminant analysis (Improved $(2D)^2$ DLDA) is proposed. In the case of face recognition, thesmall sample size problem and need for many coefficients are often encountered. In order to solve these problems, the proposed method uses the direct LDA and 2-directional image scatter matrix. Moreover the selection method of feature vector and the method of similarity measure are proposed. The ORL face database is used to evaluate the performance of the proposed method. The experimental results show that the proposed method obtains better recognition rate and requires lesser memory than the direct LDA.

• Applied Microscopy
• /
• 제44권4호
• /
• pp.133-137
• /
• 2014

We suggest a facile transmission electron microscopy (TEM) specimen preparation method for the direct (polymer-free) transfer of layer-area graphene from Cu substrates to a TEM grid. The standard (polymer-based) method and direct transfer method were by TEM, high-resolution TEM, and energy dispersive X-ray spectroscopy (EDS). The folds and crystalline particles were formed in a graphene specimen by the standard method, while the graphene specimen by the direct method with a new etchant solution exhibited clean and full coverage of the graphene surface, which reduced several wet chemical steps and accompanying mechanical stresses and avoided formation of the oxide metal.