• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.275-287
• /
• 2005

At the planning and design stages of a development of underground space or tunneling project, the information regarding ground conditions is very important to enhance economical efficiency and overall safety In general, the information can be expressed using RMR or Q-system and with the geophysical exploration image. RMR or Q-system can provide direct information of rock mass in a local scale for the design scheme. Oppositely, the image of geophysical exploration can provide an exthaustive but indirect information. These two types of the information have inherent uncertainties from various sources and are given in different scales and with their own physical meanings. Recently, RMR has been estimated in unsampled areas based on given data using geostatistical methods like Kriging and conditional simulation. In this study, simulated annealing(SA) is applied to overcome the shortcomings of Kriging methods or conditional simulations just using a primary variable. Using this technique, RMR and the image of geophysical exploration can be integrated to construct the spatial distribution of RM and to evaluate its uncertainty. The SA method was applied to solve an optimization problem with constraints. We have suggested the practical procedure of the SA technique for the uncertainty evaluation of RMR and also demonstrated this technique through an application, where it was used to identify the spatial distribution of RMR and quantify the uncertainty. For a geotechnical application, the objective functions of SA are defined using statistical models of RMR and the correlations between RMR and the reference image. The applicability and validity of this application are examined and then the result of uncertainty evaluation can be used to optimize the tunnel layout.

• Journal of Environmental Health Sciences
• /
• v.41 no.1
• /
• pp.1-10
• /
• 2015

Objectives: The purpose of this study was to propose an indirect exposure assessment method using a questionnaire survey at a time when direct exposure assessment would be impossible after a chemical accident. Methods: About two weeks after an accident, a questionnaire survey was performed with 1,264 persons from the local community. Variables related to exposure were extracted from the survey contents, weighted and then graded for comparison with subjective symptoms in order to evaluate the extent of exposure. Survey items suitable for reflecting the previous exposure level during the accident were extracted, weighted and divided into quartile ranges. Subjective symptoms showed an increasing tendency with higher exposure level when compared with final exposure level (p<0.01). Results: For the relationship between the final exposure grade and subjective symptoms, as the exposure grade was increasing the rates complaining of symptom also showed an increasing tendency. However, when adjusted for demographic characteristics, there was a tendency for the eye irritation symptom to appear higher in women, and respiratory organ irritation appeared higher in smokers. Conclusions: When the problem of recall bias is considered, this study may not have completely unraveled exposure and the characteristics of the participants can affect subjective symptoms. Nevertheless, the exposure rating method of using a questionnaire showed a significant relationship with symptom level. It can be deemed that assessment of past exposure may be successfully evaluated by questionnaire in cases such as chemical accidents.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.157-167
• /
• 1996

The method of direct seeding on flooded paddy surface in rice is known to be the most labor saving cultural practice in rice. However, this method has a problem in practical use such as severe lodging occurring at the reproductive growth stage. The objectives of this study were observated degree of field lodging and variation of lodging-related characteristics with different seeding dates. The number of seedlings per m$^2$ were from 91 to 144 plants, and seedling ratios were from ranged from 61.7% to 91.8%. Days from seeding to flowering were shortened from 5 to 15 days by the later seeding dates. Heading dates of Ilpumbyeo, Seoanbyeo, Daecheongbyeo and Donjinbyeo on June 9 showed slightly elapsed on the critical stable heading time from, August 28 to 29. The culm length was effective in longer clum varieties than semidwarf varieties. The degree field lodging (degree of lodging: 0~9< 9 : complete lodging) in Obongbyeo and S101 with semidwarf varieties were 0.17, whereas 1.25 in Dongjinbyeo with long culm. The lodging resistant varieties and later seeding dates shortened the length of fibrous in the clum, and thickened fibrous in the clum, respectively. Obongbyeo and Sl0l showed stronger resistance to field lodging. The lodging resistant varieties, Obongbyeo and Sl0l, showed lower values of lodging index from 1.03 to 1.15 than those of lodging susceptible varieties, Daecheongbyeo and Palgongbyeo ranged from 1.42 to 1.70. Bending moment with leaf sheath were greater in lodging resistant varieties (Obongbyeo and Sl0l),1510.0~1930.4g.cm, than those in the lodging susceptible varieties (Daecheongbyeo and Palgongbyeo), 1127.2~1287.6g.cm.

• Archives of design research
• /
• v.16 no.2
• /
• pp.385-394
• /
• 2003

Modem market's tendency is displaying brand strategy of Corporation sells product and consumer buys rand'.Brand acts by intermediate that reflect consumer's request and experience and attach product and consumer hat produce. Successful brand intended strategy empirical esthetics enemy, and consumer recognizes brand to novel experience and think by one fixed idea (awareness). any corporations wish to get maximum effect into minimum investment expense that reduce huge public elations and advertisement charge. Do to incuse impression for product brand through direct interview with consumer at purchase visual point, and do function hat drive purchase and the importance great rawly. Therefore, sight expression of brand image must be able to from immobile one impression in consumer's spirit being inked nearly with brand .Brand that situate by affirmative impression once can arrive in purchase by brand without alternative information being withdrawn by consumer's emory. Solution of visual expression for this being city cornification laying stress on logo and mark of brand as central element of brand image, speak as communication actor who back this. This to be Dija as direction that product and connection are deep before meaning that is sight language enemy who allow fetters special quality and the seniority in age sex language enemy of brand as ell as have direction of by methods method for problem solution present can .Therefore, relation with brand image analysis of sports equipment and consumer product purchase that this research forms market economy theoretical investigating to be effective and present direction that is image-making to be consistency this the purpose be.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.375-381
• /
• 2008

A new disease causing skin sooty dapple symptoms on fruits, leaves, and young shoot of Asian pear occurred in Korea. However, no chemical control approaches has been developed to control this disease. To investigate ecological aspects of this disease, we conducted field surveys in the high or low disease occurred orchards. The years with heavy rainfall caused severe occurrence of the skin sooty dapple disease than the years with lower rainfall during all growth stages of pear fruit. Different fruit-wrapping bags did not prevent occurrence of skin sooty dapple disease, and lesion numbers were higher in lower parts of fruit equatorial line inside of fruit-wrapping bags. There is a direct correlation between occurrence of the skin sooty dapple disease and frequency of fungicide application in the orchards. Among the tested commercial fungicides, thiophanate-methyl WP and penconazole WP completely inhibited the growth of the Cladosporium sp. in in vitro studies but little protection was observed in the field following fungicide applications. However, application of lime sulfur combined with the use of fruit-wrapping bags most effectively reduced incidence of the disease in the field. Our results suggest that skin sooty dapple disease could be a serious problem in sustainable organic pear farms and effective control methods for this disease urgently required.

• Science of Emotion and Sensibility
• /
• v.22 no.3
• /
• pp.103-108
• /
• 2019

Although the Korean Armistice Agreement resulted in complete cessation of the hostilities of the Korean War, it also initiated a rule that obligates Korean men to compulsorily participate in military service. However, psychological factors such as anxiety, stress, and negative perception among the young participants joining the military lead to inefficiency in training and performance. Several types of media production companies have been tasked to deal with this problem. However, their tools have not adequately addressed the root causes of the psychological distress. Stress rates are still high among the youth. This paper offers a method of reducing anxiety and psychological stress among those joining the military. It also aims to help improve concentration and cope with the pessimism of military life. The study measured the increase in concentration as well as the changing rate of anxiety and psychological stress in the participants of two experimental groups. A significant result with t = 2.487, p = 0.042, and 95% confidence levels was revealed by analyzing the data pertaining to the experimental group that was directly exposed to the sensorimotor rhythm (SMR) wave implying that this brain wave alleviated feelings of anxiety and psychological stress. The method proposed in this paper can thus be applied to mitigate stress in soldiers and help them with their personal and military lives. Further interdisciplinary experiments examining the associations between the electrocardiogram and electroencephalogram are required.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.569-576
• /
• 2007

Ventricular Assist Device(VAD) has switched its goal from a short-tenn use for bridge-to-transplantation to a long-tenn use for destination therapy, With this goal, the importance of long-tenn reliability gets more interests and importances, H-VAD is an portable extracorporeal biventricular assist device, and adopts an electro-pneumatic driving mechanism. The pneumatic pressure to pump out blood is generated with compression of bellows, and is transmitted in a closed pneumatic circuit through a pneumatic line. The existing pneumatic VAD adopts a air compressor which can generate stable pressures but has defects such as a noise and a size problem. Thus, it is not suitable for being used as a portable device, These problems are covered with adopting a closed pneumatic circuit mechanism with a bellows which has a small size and small noise generation, but it has defects that improper pneumatic setting causes a failure of adequate flow generation. In this study, the pneumatic pressure regulation system is developed to cover these defects of a bellows-type pneumatic VAD. The optimal pneumatic pressure conditions according to various afterload conditions for an optimal flow rate were investigated and the afterload estimation algorithm was developed, The final pneumatic regulation system estimates a current afterload and regulate the pneumatic pressure to the optimal point at a given afterload condition. The afterload estimation algorithm showed a sufficient performance that the standard deviation of error is 8.8 mmHg, The pneumatic pressure regulation system showed a sufficient performance that the flow rate was stably governed to various afterload conditions. In a further study, if a additional sensor such as ultrasonic sensor is developed to monitor the direct movement of diaphragm in a blood pump part, the reliability would be greatly increased. Moreover, if the afterload estimation algorithm gets more accuracy, it would be also helpful to monitor the hemodynamic condition of patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.94-103
• /
• 2017

As automatic hacking tools and techniques have been improved, the number of new vulnerabilities has increased. The CVE registered from 2010 to 2015 numbered about 80,000, and it is expected that more vulnerabilities will be reported. In most cases, patching a vulnerability depends on the developers' capability, and most patching techniques are based on manual analysis, which requires nine months, on average. The techniques are composed of finding the vulnerability, conducting the analysis based on the source code, and writing new code for the patch. Zero-day is critical because the time gap between the first discovery and taking action is too long, as mentioned. To solve the problem, techniques for automatically detecting and analyzing software (SW) vulnerabilities have been proposed recently. Cyber Grand Challenge (CGC) held in 2016 was the first competition to create automatic defensive systems capable of reasoning over flaws in binary and formulating patches without experts' direct analysis. Darktrace and Cylance are similar projects for managing SW automatically with artificial intelligence and machine learning. Though many foreign commercial institutions and academies run their projects for automatic binary analysis, the domestic level of technology is much lower. This paper is to study developing automatic detection of SW vulnerabilities and defenses against them. We analyzed and compared relative works and tools as additional elements, and optimal techniques for automatic analysis are suggested.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.3
• /
• pp.159-165
• /
• 2005

The characterization of radiological contamination inside pipes generated during the decommission of a nuclear facility is necessary before pipes can be recycled or disposed. But, existing direct measurements of radioactive contamination level using the survey-meter can not estimate the characteristic of contamination on a local area such as the pipe inside. Moreover, the measurement of surface contamination level using the indirect methods has many problems of an application because of the difficulty of collecting sample and contamination possibility of a worker when collecting sample. In this work, plastic scintillator was simulated by using Monte Carlo simulation method for detection of beta radiation emitted from internal surfaces of small diameter pipe. Simulation results predicted the optimum thickness and geometry of plastic scintillator at which energy absorption for beta radiation was maximized. In addition, the problem of scintillator processing and transferring the detector into the pipe inside was considered when fabricating the plastic detector on the basis of simulation results. The characteristic of detector fabricated was also estimated. As a result, it was confirmed that detector capability was suitable for the measurement of contamination level. Also, the development of a detector for estimating the radiological characteristic of contamination on a local area such as the pipe inside was proven to be feasible.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.636-641
• /
• 2015

Waste energy conversion to SRF (Solid Refuse Fuel) has the effects not alternative fossil fuel usage but also the reduction of greenhouse gas. But the direct burning of the SRF including a plastic waste generates air pollution problem like soot, dioxin, etc. so that an application of pyrolysis and gasification treatment should be needed. The purpose of this study is to supply a basic thermal data of the pyrolysis gasification characteristics in the plastic-rich SRF which are needed for developing the novel pyrolyser or gasifier. To do so, a bench-scale test rig was newly engineered, and then experiments were achieved for the production characteristics of gas, tar, and char. While SRF sample, gasification air ratio, holding time changed as 2 g, 0.691, 32 min respectively, the $H_2$ 1.36%, $CH_4$ 2.18%, CO 1.88%, $Cl_2$ 15.9 ppm, HCl 6.4 ppm were composed. Also light tar benzene $4.03g/m^3$, naphthalene $0.39g/m^3$, anthracene $0.11g/m^3$, pyrene $0.06g/m^3$, gravimetric tar $18g/m^3$, and char 0.29 g was formed.