• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.204-207
• /
• 2003

The present paper reports high-fidelity simulation of direct initiation processes of cylindrical detonation waves by concentrated energy deposition. The goal is to understand the underpinning mechanisms in failed or successful detonation initiation processes. We employed the Space-Time CESE method to solve the reacting flow equations, including realistic finite-rate chemistry model of the nine species and twenty-four reactions for H$_2$-O$_2$-Ar mixtures. Detailed results of sub-critical, critical. and supercritical initiation process are reported.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.8 s.239
• /
• pp.1118-1122
• /
• 2005

The direct current potential drop (DCPD) method and the unloading compliance (UC) method with a crack opening displacement gauge were applied simultaneously to the Zr-2.5Nb curved compact tension (CCT) specimens to determine which of the two methods can precisely determine the crack initiation point and hence the crack length for evaluation of their fracture toughness. The DCPD method detected the crack initiation at a smaller load-line displacement compared to the UC method. As a verification, a direct observation of the fracture surfaces on the curved compact tension specimens was made on the CCT specimens experiencing either 0.8 to 1.0 mm load line displacement or various loads from $50\%\;to\;80\%$ of the maximum peak load, or $P_{max}$. The DCPD method is concluded to be more precise in determining the crack initiation and fracture toughness, J in Zr-2.5Nb CCT specimens than the UC method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.45-52
• /
• 2008

In order to investigate the initiation and propagation processes of a spherical detonation wave induced by direct initiation, numerical simulations were carried out using two-dimensional compressible Euler equations with an axisymmetric assumption and a one-step reaction model based on Arrhenius kinetics with various levels of ignition energy. By varying the amount of ignition energy, three typical initiation behaviors, which were subcritical, supercritical and critical regimes, were observed. Then, the ignition energy of more than $137.5{\times}10^6$ in non-dimensional value was required for initiating a spherical detonation wave, and the minimum ignition energy(i.e., critical energy) was less than that of the one-dimensional simulation reported by a previous numerical work. When the ignition energy was less than the critical energy, the blast wave generated from an ignition source continued to attenuate due to the separation of the blast wave and a reaction front. Therefore, detonation was not initiated in the subcrtical regime. When the ignition energy was more than the minimum initiation energy, the blast wave developed into a multiheaded detonation wave propagating spherically at CJ velocity, and then a cellular pattern radiated regularly out from the ignition center in the supercritical regime. The influence on ignition energy was observed in the cell width near the ignition center, but the cell width on the fully developed detonation remained constant during the expanding of detonation wave due to the consecutive formation of new triple points, regardless of ignition energy. When the ignition energy was equal to the critical energy, the decoupling of the blast wave and a reaction front appeared, as occurred in the subcrtical regime. After that, the detonation bubble induced by the local explosion behind the blast wave expanded and developed into the multiheaded detonation wave in the critical regime. Although few triple points were observed in the vicinity of the ignition core, the regularly located cellular pattern was generated after the onset of the multiheaded detonation. Then, the average cell width on the fully developed detonation was almost to that in the supercritical regime. These numerical results qualitatively agreed with previous experimental works regarding the initiation and propagation processes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.124-127
• /
• 2000

The finite element analyses of the wrinkling initiation and growth in the sheet metal forming process provide the detailed information about the wrinkling behavior of sheet metal. The direct analyses of the wrinkling initiation and growth, however, bring about a little difficulty in complex industrial problems because it needs large memory size and long computation time. For the description of wrinkling growth, the mesh elements should be sufficiently small and the size of finite element matrix becomes large. In the static implicit finite element method therefore, the direct analysis of wrinkling growth in a complex sheet metal forming process is rather difficult. From the industrial viewpoint of tooling design, the readily available information of possibility and location of wrinkling is sometimes more preferable to the detailed time-consuming information. In the present study, therefore, the wrinkling factor that shows locations and relative possibility of wrinkling initiation is proposed as a convenient tool of relative wrinkling estimation based on the energy criterion. The location and relative possibility of wrinkling initiation are predicted by calculating the wrinkling factor in various sheet metal forming processes such as cylindrical cup deep drawing, spherical cup deep drawing, and elliptical cup deep drawing. The wrinkling factor is also implemented in the analysis of the door inner stamping process to predict wrinkling.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.177-184
• /
• 2001

This study was conducted to identify the optimum nitrogen (N) fertilization at panicle initiation stage on ridge direct seeding on dry paddy of rice. During 1999~2000, a series of experiments was carried out at field (Chonbuk series) of the National Honam Agricultural Experiment Station, RDA using Dongjinbyeo. Plants were taller, and leaf area index and top dry weight increased with more N fertilization at panicle initiation stage. Photosynthetic rate of heading stage was higher at higher amounts of N fertilization at panicle initiation stage, especially in 6 kg/10a compared with 10 kg/10a seeding rate. Lodging index and its related traits did not significantly differ under different rates of N fertilization at panicle initiation stage. N uptake of the rice plant increased as more N fertilization at panicle initiation stage. N use efficiency was highest under the standard topdressing rate at 6 kg/10a seeding rate. Panicle number per m$^2$ increased with more topdressed N, but ripened grain rate and 1,000-grain weight of brown rice did not differ with an increase in topdressed N. Milled rice yield was 6% higher in the 6 kg/10a seeding rate and 13% higher in the 10 kg/10a seeding rate at 50% more topdressed N compared with 4.8 kg/10a N fertilization at panicle initiation stage of 6 kg/10a seeding rate.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2421-2424
• /
• 2018

A direct measurement of an initiation carrier injection for a low voltage discharge is presented. A self-sustained pulsed discharge is utilized to characterize electrical responses of a glow discharge for varying amounts of injected initiation carriers. It is clearly demonstrated that the initiation carrier injection affects the ignition time and the breakdown voltage of the primary discharge. An abrupt reduction in the breakdown voltage for a $300{\mu}m$ gap pin-plate discharge is observed when a threshold carrier density of $3{\times}10^{11}cm^{-3}$ is injected and the breakdown voltage continues to decrease to 250 V with increasing the initiation carrier injection beyond the threshold density.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.97-101
• /
• 1999

No-till direct seeding cultivation of rice has major advantages such as saving of labor and cost by eliminating tillage, preparation of seed bed and trans-planting procedure compared to the conventional transplanting cultivation. A field experiment was conducted to evaluate the effects of straw treatment and nitrogen levels on the rice growth in no-till direct-seeding cultivation. Rice straw, vetch straw, and the mixture of both of the straws were mulched on the surface of soil before seeding while 4 levels of nitrogen fertilizer, 0, 7, 9, and 11 kkg/10a respectively, were applied at 3 split times, 3-weeks after sowing, 5-weeks after sowing and the panicle initiation stage. Mulching of vetch straw significantly reduced seedling establishment of rice which may be attributed to low oxidation-reduction potential of soil by vetch mulching treatment. Vetch straw increased the concentration of soil ammonium leading to an extension of the greenish leaf to panicle initiation stage. Agronomic nitrogen use efficiency (AD $E_{N}$) in heavy-mixed straw mulching plots was lower than other treatments. Grain yield and AU $E_{N}$ in the vetch treatment were less affected by fertilized N levels. Conclusively, it is suggested that heavy straw mulching was not efficient for rice seedling establishment and nitrogen usage.e.

• PNF and Movement
• /
• v.12 no.2
• /
• pp.115-121
• /
• 2014

Purpose: The study aimed to examine the influence of PNF direct and indirect breathing treatments for patients with cervical spinal cord injuries who had breathing problems. Methods: For each cervical spinal cord patient, force vital capacity (FVC), peak expiratory flow, maximum phonation time (MPT), rib cage width, and VAS were measured pre-intervention and four weeks after post-intervention. The indirect method and the direct method were used for interventions. We treated patients with the indirect method using scapular anterior depression pattern, bilateral extensor pattern with rhythmic initiation, and a combination of isotonic. We treated patients with the direct method, applying pressure on the sternum and using rhythmic initiation (hold relax and stretch reflex) for the rib cage. Training occurred for 50 minutes a day and three days per week for four weeks. Results: FVC, MPT, peak expiratory flow, and rib cage width were increased and decreased at the VAS point for rolling after treatment. Conclusion: Patients with cervical spinal cord injuries who had breathing problems felt uncomfortable when they had conversations on a couch. We found that PNF direct and indirect treatments improved rib cage width and breathing functions of patients with cervical spinal cord injuries.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.6 s.171
• /
• pp.152-158
• /
• 2005

The stress conditions acting on the practical structure are complex, and thus most cracks existing in the practical structures are under mixed-mode loading conditions. The effect of shear load component of mixed-mode loading acts more greatly in the stage of crack initiation and initial propagation than crack propagation stage. Hence, research on the behavior in the stage of crack initiation and initial propagation need to be examined in order to evaluate behavior of mixed-mode fatigue cracks. In this study, the crack tip displacement(CTD) was measured by using the direct measuring method(DMM). We examined the behavior at crack tip by determining crack opening load$(P_{op})$. From the test results, the propagation behavior of mixed-mode fatigue cracks was evaluated by considering mixed-mode crack closure. Also, we examined the characteristic of crack propagation under mixed-mode loading with crack propagation direction.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.195-198
• /
• 2005

The role of elastic/plastic mismatch on the contact crack initiation is investigated for designing desirable surface-coated asymmetric layered composites. Various layered composites such as $Si_3N_4$ ceramics on $Si_3N_4+BN$ composite, soda-lime glass on various substrates with different elastic modulus for the analysis. Spherical indentation is conducted for producing contact cracks from the surface or interface between the coating and the substrate layer. A finite element analysis of the stress fields in the loaded layer composites enables a direct correlation between the damage patterns and the stress distributions. Implications of these conclusions concerning the design of asymmetric layered composites indicate that the elastic modulus mismatch is one of the important parameter for designing layered composite to prevent the initiation of contact cracks.