• ETRI Journal
• /
• 제33권6호
• /
• pp.973-976
• /
• 2011

This letter describes an efficient technique for maximum power point tracking (MPPT) of an energy harvesting device. It is based on controlling the device voltage at the point of maximum power. Using a microcontroller with a power saving technique, the MPPT algorithm maintains the maximum power with low power consumption. An experiment shows that the algorithm maximizes the energy transfer power using an energy management IC fabricated in a 0.18-${\mu}m$ process. Compared to direct energy transfer to a battery, the proposed technique is more efficient for low-energy harvesting under variable conditions.

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1503-1507
• /
• 2004

New synthetic methodology of the saturated and unsaturated Er(III)-chelated prototype complexes based on benzoate and pentafluorobenzoate ligands was developed through ligand-exchange reaction. The saturated 8-coordinated Er(III) complexes exhibit stronger near-IR emission than those of the unsaturated 6-coordinated Er(III) complexes, obtained from the direct photoexcitation of Er ions with 488 nm. Three $H_2O$ molecules coordinated in the unsaturated 6-coordinated complexes seriously quenched the near IR emission by the harmonic vibration relaxation decay of O-H bonds. Also, the stronger emission of the Er(III) complexes was obtained by the indirect photoexcitation of ligands than by the direct photoexcitation of the Er(III) ions, due to the energy transfer between the excited ligand and the erbium ion. Furthermore, the saturated Er(III)-chelated complex with C-F bonds shows much stronger near IR emission than that of the saturated Er(III)-chelated complex with C-H bonds. It is attributed to the influence of C-F bonds on near IR emission.

• 한국작물학회지
• /
• 제36권4호
• /
• pp.305-309
• /
• 1991

종자순도 유지를 위한 기초자료로 활용코자 콤바인 수확시의 탈립종실이 익년 본답재배양식별 출현정도 및 생육특성을 정상재배벼와 비교검토 한 결과를 요약하면 다음과 같다. 1. 콤바인 수확시 품종별 탈립정도는 삼강벼가 49.5kg/10a로서 낙동벼의 27.8kg/10a보다 현저히 많았으나 탈립종자의 월동후 발아율은 오히려 낙동벼가 훨씬 높았다. 2. 이형주출현율 및 종자혼입율은 재배양식간에는 직파재배가 이앙재배보다, 그리고 품종별로는 일반형품종이 통일형품종보다 높은 경향이였다. 3. 이형주의 생육은 공시품종 모두 천립종을 제외한 간장, 주당수수, 수당입수 및 등숙율등 대부분의 형질들이 정상재배벼에 비하여 저하하는 경향이 었다.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.64-71
• /
• 2006

A target of this paper is to study on the usefulness of the adaptive piezoelectric energy harvesting device as a wireless electrical power supply when it is driven by mechanical vibrations of low frequency. For this purpose, an adaptive control technique and a step-down converter are used. A THUNDER series a piezoelectric material (TH7-R), which has been developed by a NASA engineer is selected for this study. In order to provide a mechanical energy to the piezoelectric material, a mechanical motion vibrator is designed. The adaptive controller is implemented using a dSPACE DS1104 controller board. The do-dc converter with an adaptive control technique harvests energy at over five times the rate of direct charging without a converter.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.78-85
• /
• 2008

Piezoelectric materials have been investigated as vibration energy converters to power wireless devices or MEMS devices due to the recent low power requirements of such devices and the advancement in miniaturization technology. Piezoelectric power generation can be an alternative to the traditional power source-battery because of the presence of facile vibration sources in our environment and the potential elimination of the maintenance required for large volume batteries. This paper represents the new power source which supplies energy device node. This system, called "energy harvesting system", with piezo materials scavenges extra energy such as vibration and acceleration from the environment. Then it converts the mechanical energy scavenged to electrical energy for powering device This paper explains the properties of piezo material through theoretical analysis and experiments The developed system provides a solution to overcome the critical problem of making up wireless device networks.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.221-224
• /
• 1999

A field experiment was carried out to observe the weed control effects of vetch and to evaluate vetch characteristics on clay loam soil in no-till direct-sown rice-vetch cropping systems. The effects of weed control, forage productivity, and N content of vetch plants were investigated. With the progress of plant growth, density of Chinese milk vetch (Astragalus sinicus L.) gradually decreased, but densities of foxtail and other weeds decreased steeply due to the depression by the over-shaded vetch canopy in a no-till direct-sown rice-vetch cropping paddy field. The vetch density in tillage systems was lower than in notillage cropping systems. Lower vetch density occurred with an increase in foxtail density and other weeds. Weed control effect increased by the progress of vetch growth, which indicated that the vetch canopy over-shaded the weeds. Vetch straw was degraded rapidly submergence after with water at the time of wet sowing of rice. Early harvesting of vetch seed resulted in lower seed germination. To acquire enough seedlings without re-sowing, the harvesting of seed should be delayed at least 28 days after the flowering stage in order to ensure the vetch population is sustainable in a no-till direct-sown rice-vetch cropping system. In order to improve the survival of vetch plants, vetch seeds should germinate from the heading .stage to before the full-ripening stage of rice plants. To enhance the percent of over-wintering survival, vetch seeds should germinate no later than the end of October in southern Korea. The dry weight of vetch plants increased with the progress of vetch growth until the flowering stage but N content decreased for 30 days from before the flowering stage (2.9%) until the ripening stage (1.8%). We concluded that Chinese milk vetch could have an effect on weed control before the flowering stage, sustainability without re-sowing of seed annually, and effective green manure for rice pre-crop in no-till direct-sown rice-vetch relay cropping systems.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2441-2446
• /
• 2018

This paper presents a radio frequency-to-direct current (RF-to-DC) converter for special RF power harvesting application at 915 MHz. The major featured components of the proposed RF-to-DC converter is the combination of a cross-coupled rectifier and an active diode: first, the cross-coupled rectifier boosts the input voltage to desired level, and an active diode blocks the reverse current, respectively. A prototype was implemented using $0.18{\mu}m$ CMOS technology, and the performance was proven from the fact that the targeted RF harvesting system's full-operation with higher power efficiency; even if the system's input power gets lower (e.g., from nominal 0 to min. -12 dBm), the proposed RF-to-DC converter constantly provides 1.47 V, which is exactly the voltage level to drive follow up system components like DC-to-DC converter and so on. And, maximum power conversion efficiency is 82 % calculated from the 0 dBm input power, 2.3 mA load current.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.51-57
• /
• 2014

PURPOSES : An conventional method for electric power generation is converting thermal energy into mechanical energy then to electrical energy. Due to environmental issues such as global warming related with $CO_2$ emission etc., were the limiting factor for the energy resources which resulting in extensive research and novel technologies are required to generate electric power. Thermal energy harvesting using thermoelectric generator is one of energy harvesting technologies due to diverse advantages for new green technology. This paper presents a possibility of application of the thermoelectric generator's application in the direct exchange of waste solar energy into electrical power in road space. METHODS : To measure generated electric power of the thermoelectric generator, data logger was adopted as function of experimental factors such as using cooling sink, connection methods etc. Also, the thermoelectric generator、s behavior at low ambient temperature was investigated as measurement of output voltage vs. elapsed times. RESULTS : A few temperature difference between top an bottom of the thermoelectric generator is generated electric voltage. Components of an electrical circuit can be connected in various ways. The two simplest of these are called series and parallel and occur so open. Series shows slightly better performance in this study. An installation of cooling sink in the thermoelectric generator system was enhanced the output of power voltage. CONCLUSIONS : In this paper, a basic concepts of thermoelectric power generation is presented and applications of the thermoelectric generator to waste solar energy in road is estimated for green energy harvesting technology. The possibility of usage of thermoelectric technology for road facilities was found under the ambient thermal gradient between two surfaces of the thermoelectric module. An experiment results provide a testimony of the feasibility of the proposed environmental energy harvesting technology on the road facilities.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1992년도 춘계 학술대회지
• /
• pp.92-93
• /
• 1992

• Archives of Reconstructive Microsurgery
• /
• 제5권1호
• /
• pp.106-111
• /
• 1996

Purpose : Propose a surgical technique in donor harvesting method in free vascularized proximal fibular epiphysis. Methodology : Concerned about growth potentials of the transplanted epiphysis in our long term results of the epiphyseal transplanted 13 cases more than 4 years follow-up, anterior tibial artery which contains anterior tibial recurrent artery is most reliable vessel to proximal fibular epiphysis which is the best donor of the free vascularized epiphyseal transplantation. In vascular anatomical aspect proximal fibular epiphysis norished by latearl inferior genicular artery from popliteal, posterior tibial recurrent artery and anterior tibial recurrent artery from anterior tibial artery and peroneal artery through metaphysis. The lateral inferior genicular artery is very small and difficult to isolate, peroneal artery from metaphysis through epiphyseal plate can not give enough blood supply to epiphysis itself. The anterior tibial artery which include anterior tibial recurrent and posterior tibial recurrent artery is the best choice in this procedure. But anterior tibial recurrent artery merge from within one inch from bifucating point of the anterior and posterior tibial arteries from popliteal artery. So it is very difficult to get enough vascular pedicle length to anastomose in recipient vessel without vein graft even harvested from bifucating point from popliteal artery. Authors took recipient artery from distal direction of anterior tibial artery after ligation of the proximal popliteal side vessel, which can get unlimited pedicle length and safer dissection of the harvesting proximal fibular epiphysis. Results : This harvesting procedure can performed supine position, direct anterolateral approach to proximal tibiofibular joint. Dissect and isolate the biceps muscle insertion from fibular head, micro-dissection is needed to identify the anterior tibial recurrent arteries to proximal epiphysis, soft tissue release down to distal and deeper plane to find main anterior tibial artery which overlying on interosseous membrane. Special care is needed to protect peroneal nerve damage which across the surgical field. Conclusions : Proximal fibular epiphyseal transplantation with distally directed anterior tibial artery harvesting technique is effective and easier dissect and versatile application with much longer arterial pedicle.