• 한국초전도ㆍ저온공학회논문지
• /
• 제19권4호
• /
• pp.40-44
• /
• 2017

This paper analyzed the fault current limiting characteristics of the previously proposed transformer superconducting fault current limiter (TSFCL) interruption system according to its transformer type. The TSFCL interruption system is an interruption technology that combines a TSFCL, which uses a transformer and a superconductor, and a mechanical DC circuit breaker. This technology first limits the fault current using the inductance of the transformer winding and the quench characteristics of the superconductor. The limited fault current is then interrupted by a mechanical DC circuit breaker. The magnitude of the limited fault current can be controlled by the quench resistance of the superconductor in the TSFCL and the turns ratio of the transformer. When the fault current is controlled using a superconductor, additional costs are incurred due to the cooling vessel and the length of the superconductor. When the fault current is controlled using step-up and step-down transformers, however, it is possible to control the fault current more economically than using the superconductor. The TSFCL interruption system was designed using PSCAD/EMTDC-based analysis software, and the fault current limiting characteristics according to the type of the transformer were analyzed. The turns ratios of the step-up and step-down transformers were set to 1:2 and 2:1. The results were compared with those of a transformer with a 1:1 turns ratio.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.325-331
• /
• 1999

계통연계형 태양광발전시스템에서는 계통과 태양광시스템을 연계하기 위해 PWM 인버터가 이용된다. 인버터 시스템을 연속전류모드로 운전하면 맥동이 발생하게 되고, 직류전류의 맥동발생은 교류전류파형의 왜형을 가져온다. 본 연구에서는 직류입력전류의 맥동을 감소시키기 위하여 불연속모드 승강압초퍼로 인버터를 운전한다. 직류 전류에 포함된 고조파성분을 리플성분과 직류성분으로 분리하여 해석하고, 맥동이 없는 일정한 직류전류를 태양 전지로부터 인버터로 공급한다. 제안하는 인버터시스템은 단위 역률로 부하와 계통에 교류전류를 공급한다.

• 수산경영론집
• /
• 제26권1호
• /
• pp.9-27
• /
• 1995

From now on, the direction of fishery products circulation measure should be improved the system to give just the right of free choice of sale route like retail, direct sale, direct dealings and direct shipping only for fishermen to produce them diversifing the function and the role of current fish market in the production to prepare the fishery internationalization, to improve the competitiveness of coastal and off-shore fishery. Practically wholesale market in land and fish market in the production have the different function and role, the organization of wholesale market in land can't substitute the essential function and role which fish market in the production should perform. So far, fisheries cooperatives as a managing subject of fish market in the production have depended on the consignment sales and purchases of fishery products but, from now on, it should be explore the widespread supply way of fishery products by producing value - added fishery products that should bring higher demand from the consumers, producer - consumer direct marketing system through not only consignment sales but also direct sales that common processing and manufacturing system of fishery products under the management of FC has been established. The direction of the idealest structural improvement of fishery production circulation organization is to establish the the position of the fishery retail price leader based on the standard of market in the fisheries production due to existing characteristics of fisheries, accordingly, to harmony the market organization of direct transportation, direct sales and direct dealings form by producer and group of producers with market organization in the fisheries production, and to make the condition to do the appropriate distributive function.

• 농촌계획
• /
• 제13권4호
• /
• pp.69-77
• /
• 2007

The purpose of this study is to analyze the problems of operating the Direct Payment Program for Rural Landscape Preservation and to derive the way of improvement based on case study for three areas in Bonghwa-gun, Cheongwon-gun, Hongseong-gun. The most important factor for the program is farmer's consciousness and positive participation of the farmer who are the subject of this project. Even if farmers are not satisfied with the amount of direct payment income, they try to create income by utilizing landscape preservation crops. Particularly current unit payment dose not surpass the for the crops farm operating costs and payment time is not appropriate for the farming cycle. Hence, it needs to be considered increasing unit payment and rearranging the payment time. Also, we need to introduce incentive system based the degree of fulfillment of the Direct Payment Program in each areas. In general the Direct Payment Program for Rural Landscape Preservation has potentiality to contribute farmer's income stability and the vitalization of region with three revisions.

• Structural Engineering and Mechanics
• /
• 제88권5호
• /
• pp.463-480
• /
• 2023

The buckling-restrained braced frames with eccentric configurations (BRBF-Es) exhibit stable cyclic behavior and possess a high energy absorption capacity. Additionally, they offer architectural advantages for incorporating openings, much like Eccentrically Braced Frames (EBFs). However, studies have indicated that significant residual drifts occur in this system when subjected to earthquakes at the Maximum Considered Earthquake (MCE) hazard level. Consequently, in order to mitigate these residual drifts, it is recommended to employ self-centering systems alongside the BRBF-E system. In our current research, we propose the utilization of the Direct Displacement-Based Seismic Design method to determine the design base shear for a hybrid system that combines BRBF with an eccentric configuration and a self-centering frame. Furthermore, we present a methodology for designing the individual components of this composite system. To assess the effectiveness of this design approach, we designed 3-, 6-, and 9-story buildings equipped with the BRBF-E-SCF system and developed finite element models. These models were subjected to two sets of ground motions representing the Maximum Considered Earthquake (MCE) and Design Basis Earthquake (DBE) seismic hazard levels. The results of our study reveal that although the combined system requires a higher amount of steel material compared to the BRBF-E system, it substantially reduces residual drift. Furthermore, the combined system demonstrates satisfactory performance in terms of story drift and ductility demand.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.210-213
• /
• 1999

A battery is the device that transforms the chemical energy into the direct-current electrical energy directly without a mechanical process. Unit cells are connected in series to obtain the necessary voltage, while being connected in parallel to organize capacity for load current and to decrease the internal resistance for corresponding the sudden shift of the load current. The circular-current, however, could be occurred when the system is driven in parallel. As a result, the new batteries are heated by over-change and discharge, and the over charge current makes to increase the rust of the positive grid and consequently the shortened life of the new batteris would be shown. In this paper, the internal resistance of charge and discharge will be balanced, through inserting the resistance into the system by way of calculation of the changed amount of internal resistance.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.895-903
• /
• 2012

This paper presents a fast switching direct torque control (FS-DTC) using only a single DC-link current sensor. In FS-DTC, six new active voltage complex space vectors (CSVs) are synthesized by the conventional active voltage space vectors (SVs). The corresponding sectors are rotated in the anticlockwise direction by 30 degrees. A selection table is defined to select the CSVs. Based on the "Different Phase Mode", the output sequence of the selected CSV is optimized. Accordingly, a reconstruction method is proposed to acquire the phase currents. The core of the FS-DTC is that all of the three phase currents can be reliably reconstructed during every two sampling periods, which is the result of the fast switching between different phases. The errors between the reconstructed and actual currents are strictly limited in one sampling period. The FS-DTC has the advantages of the standard DTC scheme such as simple structure, quick torque response and robustness. As can be seen in the analysis, the FS-DTC can be thought of as an equivalent standard DTC scheme with 86.6% of the maximum speed, 173.2% of the torque ripple, and 115% of the response time of the torque. Based on a dSPACE DS1103 controller, the FS-DTC is implemented in an induction machine drive system. The results verify the effectiveness of the FS-DTC.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.23-26
• /
• 2001

This paper presents a digital motion control system for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The system consists of stator flux observer, torque estimator: two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter(VSI), and TMS320C31 DSP controller by using fully integrated control software. The stator flux observer is based on the combined voltage and current model with stator flux feedback adaptive control of which inputs are current, voltage and actual rotor angle for wide speed range. In order to prove the suggested motion control algorithm, There are some simulation and testing at actual experimental system. The developed digitally high-performance motion control system are shown a good motion control response characteristic results and high performance features using 1.0Kw RSM.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권7호
• /
• pp.399-405
• /
• 2002

This paper presents an implementation of digital high-performance Position sensorless motion control system of an induction motor drives with Direct Torque Control(DTC). The system consist of closed loop stator flux and torque observer, speed and torque estimators, two hysteresis controller, optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP board. The stator flux observer is based on the combined current and voltage model with stator flux feedback adaptive control of which inputs are current and voltage sensed on motor terminal for wide speed range. The speed observer is using the model reference adaptive system(MRAS) with rotor flux linkages for speed turning signal. The simulation and experimental results are provided to evacuate the consistency and the performance of the suggested position sensorless control algorithm. The developed position sensorless system are shown a good motion control response characteristic and high performance features using 2.2[kw] general purposed induction motor.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권3호
• /
• pp.150-157
• /
• 2002

This paper presents preliminarily an implementation of digital high-performance motion control system of Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The system consist of stator flux observer, torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source inverter, and TMS320F240 DSP controller made by Texas Instruments. The stator fluff observer is based on the combined voltage and current model with stator flux feedback adaptive control, and the input of the observer are the stator voltage and current of motor terminal for wide speed range. The rotor position and speed sensor used 6000 pulse/rev encoder. In order to prove rightness of the suggested control algorithm, we have some simulation and actual experimental system at $\pm$20 and $\pm$2000 rpm. The developed digitally high-performance motion control system+ are shown a good response characteristic of control results and high performance features using 1.0kW RSM which has 2.57 Ld/Lq salient ratio.