• 대한통합의학회지
• /
• 제4권4호
• /
• pp.109-117
• /
• 2016

Purpose : This study was designed to provide basic data of effective sanitization method of sprout vegetable for microbiological safety. Methods : Sanitization treatments were performed by dipping the sprout into chlorine and vinegar water. Microbial analysis were composed of the total plate count(TPC) and coliform group count(CGC). Result : Among chlorine water sanitization, the microbial reduction was largest in 100ppm chlorine water, and its TPC and coliform group count decreased to 6.01 log CFU/g and 5.06 log CFU/g. The effective dipping time in 100ppm chlorine water treatment was 5.97 log CFU/g and 5.91 log CFU/g for 30min and 60min, in which TPC were below the microbiological safety limits of 6.00 log CFU/g. Coliform group counts were decreased to 5.44, 5.46, 5.42 log CFU/g in the dipping the spouts for 30min, 60min and 90min. As a result of sanitizing alfalfa spout by vinegar water, a microbial counts tended to decrease with increasing concentration and the dipping time. The effective concentration of vinegar water was 2% for TPC(6.00 log CFU/g) and 1% for coliform group count(5.20 log CFU/g). With 1% vinegar water treatment, TPC became below the microbiological safety limits in all samples and in particular, the sample treated for 60min and 90min(4.93, 4.54 log CFU/g). While coliform group counts were decreased to 3.91 log CFU/g in the dipping the sprouts for 90min, those were still beyond the permitted limit. Conclusion : To secure the food safety of food service facilities including kindergarten feeding, it is considered that along with the systematic study of effective disinfection method for microbiological control at the preconditioning level of spout vegetable within the range of secured maleficence to human body, and the study regarding the measures to lower the initial microbiological pollution of spout vegetable.

• 한국어병학회지
• /
• 제21권2호
• /
• pp.107-117
• /
• 2008

The pharmacokinetic properties of oxytetracycline (OTC) were studied after dipping and oral administration to cultured olive flounder, Paralichthys olivaceus (600 g). Plasma concentrations of OTC were determined after oral dosage (50, 100 and 200 mg/kg body weight) and dipping (50, 100 and 200 ppm, 1 h) in olive flounder (average 600 g, 23±1℃). Plasma samples were taken at 3, 5, 10, 15, 24, 32, 48, 72, 120, 168 and 240 h post-dose. In oral dosage of 50, 100 and 200 mg/kg, the peak plasma concentrations of OTC, which attained at 3 h post-dose, were 0.34, 0.44 and 1.18 ㎍/㎖, respectively. In dipping of 50, 100 and 200 ppm, those of OTC which also observed at 5 h post-dose, were 0.43, 0.38 and 0.64 ㎍/㎖, respectively. Plasma concentrations of OTC were not measurable at 240 h post-dose in all experiments. The kinetic profile of absorption, distribution and elimination of OTC in plasma were analyzed fitting to a one-compartment model by WinNonlin program. The following parameters were calculated for a single dosage of 50, 100 and 200 mg/kg body weight, respectively: AUC (the area under the concentration-time curve)=31.40, 28.07 and 32.97 ㎍∙h/㎖; T1/2 (half-life)􀆫0.89, 1.12 and 0.43 h; Tmax (time for maximum concentration)= 5.25, 3.70 and 7.30 h, Cmax (maximum concentration)=0.25, 0.38 and 0.61 ㎕/㎖. Following dipping at 50, 100 and 200 ppm, these parameters were AUC􀆫15.51, 14.63 and 19.72 ㎍∙h/㎖; T1/2= 0.75, 0.41 and 0.74 h; Tmax=4.90, 7.08 and 4.68 h, Cmax=0.40, 0.32 and 0.46 ㎕/㎖.

• 화훼연구
• /
• 제16권1호
• /
• pp.71-75
• /
• 2008

때죽나무의 발근 향상을 위한 IBA와 붕소의 적정농도, 침지시간, 그리고 붕소와 IBA의 혼용처리 효과를 알아보기 위해 실험을 수행한 결과는 다음과 같다. 때죽나무 반숙지삽수의 발근율과 발근수는 IBA $7,000mg{\cdot}L^{-1}$ 순간침지, IBA $100mg{\cdot}L^{-1}$+boron $20mg{\cdot}L^{-1}$과 IBA $100mg{\cdot}L^{-1}$+boron $60mg{\cdot}L^{-1}$ 혼용처리에서 향상되었으며 발근율, 발근수 그리고 생체중은 IBA단일처리보다 붕소와 IBA의 혼용처리에서 높았다. IBA 단일처리에서 적정 농도는 $100mg{\cdot}L^{-1}$과 $200mg{\cdot}L^{-1}$ 사이였으며, 적정 침지시간은 3시간 이었다. 이에 저농도의 IBA와 붕소의 혼용처리는 IBA $7,000mg{\cdot}L^{-1}$의 고농도처리를 대체할 수 있을 것으로 판단된다.

• Composites Research
• /
• 제32권6호
• /
• pp.314-318
• /
• 2019

본 연구에서는 습식 코팅 방식 중 하나인 다층박막적층법의 자동화 시스템을 제작하였다. 특히, 본 연구에서 제안한 자동화 시스템은 다층박막적층법의 공정 변수(예를 들어, 증착 재료, 코팅 깊이, 코팅 및 헹굼 시간)를 제어함으로써 손으로 작업하는 것과 동일한 변수 조작이 가능하게 설계되었다. 자동화 시스템을 통해 기판을 완벽하게 용액 안으로 침액시킬 수 있으며, 이를 통해 특별한 분자간 결합(예를 들어, 정전기적 인력, 공유 및 수소 결합)을 통해 기판 위에 균일한 다층의 박막 형성이 가능하다. 두 종류 이상의 용액으로 기판이 침액될 때, 이 기판은 다른 용액으로 이동되기 전에 청소 구역에서 헹굼과 건조 과정을 거친다. 이러한 담금, 헹굼, 건조 과정은 모두 컴퓨터 프로그램에 의해 제어 가능하다. 본 연구에서는 자동화 시스템을 통해 그래핀을 기반으로 하는 다층박막 샘플을 제작하였고, 균일한 그래핀의 적층 여부를 분석하기 위해 제작된 샘플의 흡광도와 두께를 측정하였다. 기판 위에 그래핀과 고분자 층의 적층이 진행될수록 흡광도와 두께가 균일하게 증가하는 결과를 통해, 본 연구에서 제작한 자동화 시스템이 수작업을 통한 다층박막의 적층을 완벽하게 대체 가능함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.422-426
• /
• 2008

Hemodialysis graft coated with paclitaxel prevents stenosis; however, large initial burst release of paclitaxel causes many negative effects such as drug toxicity and inefficient drug loss. Therefore we developed and tested a novel coating method, double dipping, to provide controlled and sustained release of paclitaxel locally. Expanded polytetrafluoroethylene (ePTFE) grafts were dipped twice into a solution of several different paclitaxel concentrations. In vitro release tests of the double dipping method showed that early burst release could be somewhat retarded and followed by sustained release for a long time. We observed the effect of paclitaxel coating by double dipping in porcine model of arterio-venous (AV) grafts between the common carotid artery and the external jugular vein. 12 weeks after constructing AV grafts, cross sections of the graft venous anastomosis were obtained and analyzed. Paclitaxel coated ePTFE grafts by double dipping were observed to prevent neointimal hyperplasia and therefore reduced stenosis of the arteriovenous hemodialysis grafts, especially at the graft venous anastomosis sites. Our results demonstrate that second dipping of ePTFE graft, which was already coated once with paclitaxel, washes off the drug on a surface of the graft and affects the ratio of paclitaxel on the surface to that of the inner space, possibly by diffusion: thus the early burst of drug can be somewhat reduced.

• 한국표면공학회지
• /
• 제29권4호
• /
• pp.278-285
• /
• 1996

The structure of coating layer formed by hot dip Al-Cu alloy coating on Monel 1400 metal was studied. The coating layer consists of alloyed layer adjacent to the Monel 400 substrate and Al-Cu alloy. It was found that the hardness of coating increased with dipping time and heat treatment associated with the diffusion and the formation of intermetallic compound at the interface. However the thickness of coating layer was decreased at high dipping temperature due to tile higher viscosity of liquid coating alloy. Diffusion heat treatment at $600^{\circ}C$ after coating resulted in the disappearence of adhered Al(Cu) and $CuAl_2$ phases, and then they transformed into the new phases of CuAl and Al7Cu4Ni at coating layer.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.69-72
• /
• 1999

The aim of this study is to enhance the abrasion of the hydrolyzed polyethylene terephthalate(PET) fabrics by using microwave energy. In other to achieve the aforementioned objectives, PET fabrics were hydrolyzed in NaOH solution by using abrasion method such as dipping, microwave-dipping, pad steam-dry, and pad microwave-dry, and then abrasion of the hydrolyzed PET fabrics was calculated and investigated. As a result obtained form this study, the abrasion of the hydrolyzed PET fabrics is directly proportional to hydrolyzed time and NaOH concentration. And also, microwave-dipping method and pad microwave-dry method showed remarkable abrasion effect than the others.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.716-719
• /
• 2016

In this paper, we fabricated flexible CNT/PVDF (carbon nanotube / polyvinylidene fluoride) piezoelectric composite device with flexible poly(3,4-ethylenedioxythiophene) : polystyrene sulfonate (PEDOT:PSS) conducting polymer electrode using spray coating method. We tried to improve the piezoelectric performance from the CNT/PVDF composite film by enhancing electrical conductivity of the PEDOT:PSS electrodes. Electrical conductivity of the PEDOT:PSS electrode was enhanced by dipping it into the EG (ethylene glycol) solvent. Changes of chemical composition of the PEDOT:PSS electrode were analyzed with the dipping time by XPS (x-ray photoelectron spectroscopy) in terms of oxygen (O1s). Finally, Piezoelectric performances such as output voltage and current were measured with the dipping time. We found that enhanced electrical conductivity of the PEDOT:PSS electrodes resulted in improvement of the piezoelectric performance of the CNT/PVDF films.

• 공업화학
• /
• 제5권6호
• /
• pp.990-997
• /
• 1994

천연고무 라텍스(NRL)와 메틸메타 크릴레이트가 그라프트된 라텍스(MGL)를 각종 첨가제와 혼합하여 dipping공정으로 가황된 NR 및 블렌드 필름을 제조하였다. NR 필름 제조의 최적조건을 규명하기 위하여 숙성시간에 따른 팽윤도, 인장강도 및 $110^{\circ}C$에서 가황시간의 변화에 따른 기계적 특성을 비교하였다. 필름 표면의 구조 및 미끄럼성을 조사하기 위하여 접촉각 및 정 동마찰계수를 측정한 결과, 접촉각은 MGL의 블렌드 비율이 증가할수록 감소하였고, 정 및 동마찰계수는 NR 필름에 비하여 NR/MG과 NR-d-MG 필름이 현저히 감소하여 표면 미끄럼성이 향상됨을 알 수 있었다.