• Journal of fish pathology
• /
• v.19 no.2
• /
• pp.155-164
• /
• 2006

Tissue distribution and residue depletion of oxytetracycline (OTC) and tetracycline (TC) following dipping administration were evaluated in olive flounder (Paralichthys olivaceus), rockfish (Sebastes schlegeli), and red sea bream (Pagrus major) under field conditions. Fishes were held in floating cages placed in sea water and fed a commercial diet for 15 days to acclimate to a new surrounding. Fishes were dipped in OTC 50 g/ton water for 30min and TC 18 g/ton water for 5 hours. Blood and muscle were sampled from fishes on 0th, 1th, 2th, 3th, and 5th day after administration. After solid-phase extraction, OTC and TC analyses were carried out by HPLC. The recovery rate of OTC in serum and muscle samples was 71-77% and 78-84%, respectively. Also, the recovery rate of TC in serum and muscle samples was 70-79% and 73-78%, respectively. The results of recovery rate were similar to previous studies reported. At the termination of dipping administration of OTC and TC, residue concentration in muscle samples of rockfish was significantly higher than those of olive flounder and red sea bream. At day 5, residue concentrations of all samples were believed to decrease to lower than 0.05 mg/kg, the detection limit. The present study showed that residue concentrations of OTC and TC decreased to below 0.05 mg/kg after treatment 5th day, faster than the established withdrawal period. The tissue reside depletion time of dipping administration of OTC and TC seems to be shorter than those of oral or parenteral administration.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.202-205
• /
• 2011

This study was conducted to determine the effects of several rooting promoter treatments on rooting of Corylopsis coreana cutttings for mass production. In first year experiment, no effect of rooting promoters was observed in hardwood cuttings taken on March 20. However, In softwood cuttings of June 20, rooting potential was greatly increased by IBA $100mg{\cdot}L^{-1}$ dipping treatment for 24 hours. Particularly, IBA $100mg{\cdot}L^{-1}$ 24 hour dipping treatment greatly shortened the days required for the rooting. In second year experiment, the result of first year was reconfirmed. Almost of all the cuttings (97.8% of rooting rate) were well rooted after only 30 days after cutting by IBA $200mg{\cdot}L^{-1}$ 24 hour dipping treatment. In this treatment, numbers and length of root were also prominent compared with any other treatment results.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.497-504
• /
• 2005

This experiment was conducted to improve germination rate of the seed treated duration of storage and $GA_3$ in Celosia argentea. With the seed directly after harvest, as increasing concentration of $GA_3$, ranged from 50ppm to 200ppm, and dipping hour, ranged from 6 to 24 hour, the rate of germination was also increased. The germination of seed dipping in 200ppm $GA_3$ for 24 hours was the highest with $52\%$ compared to the control with $12\%$. As increasing storage duration in $22{\pm}2^{\circ}C$, ranged from 2 weeks to 12 weeks, the rate of germination was also increased showing $84\%$ at 12 week. However, the rate of germination was not increased with the storage of $5^{\circ}C,\;0^{\circ}C,\;and\;-70^{\circ}C$. With the seed storage 16 weeks in $22{\pm}2^{\circ}C$ after harvest, the rate of germination was $84\%$. The rate of germination was increased $94\%\;to\;99\%$ by the $GA_3$ concentration, ranged from 50ppm to 400ppm, and dipping hour, ranged from 6 to 24 hour. The germination was finished 4 days after sowing.

• Journal of the Korean institute of surface engineering
• /
• v.21 no.2
• /
• pp.39-46
• /
• 1988

Corrosion behavior of 5-26wt% Ni-Zn electrodeposited alloys was investigated by means of dipping electrochmical polarization measurement and galvanic coupling test. The weight loss and anodic polarization curve of coatings were measured by means of dipping and polarization measurement respectively. The galvanic protection effect of alloy coatings was measured by galvanic coupling test and the surface morpholgy of coatings was observed after corrosion testing. Our findings support thous of previous investigations showing that ${\gamma}$single phase coatings, while galvanic pprotection effect of dual phase coatings improved in comparison with ${\gamma}$single phase coating. The formation of colony in coating of ${\gamma}$and η+${\gamma}$ dual phsae caused the localized corrsion and increased the corrosion rate of the Ni-Zn coating.

• Membrane Journal
• /
• v.4 no.1
• /
• pp.38-45
• /
• 1994

The experiment was conducted to evaluate the effects of variables in preparing TFC membrane by interfacial polymerization. Obtained results are as follow: As the concentration of MPD increses, the rejection rate incresed, the total volume flux was decresed. As the dipping time in MPD solution increases, the rejection rate increased, the total volume flux was increased until reach optimum point. As the dipping time in TMC solution increses, the total volume flux increased, the rejection rate was increased until reach optimum point. As the curing temperature increases, the total volume flux increased was an optimum point in the rejection rate. Since the quantity of generating hydrochloric acid was small, the required quantity of NaOH for neutriliztion was small. The post-treatment with ethanol, isopropanol and water in the temprerature ranging of $5~7^{\circ}C$ brought an increment of the rejection and the total volume flux, For water temperature ranging of $5~7^{\circ}C$was the optimum temperature in the post treatment.

• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.13-17
• /
• 2006

The strawberry was dipped into $1\%\;CaCl_2$ solution at $20^{\circ}C\;and\;45^{\circ}C$ for 15min. respectively, and then packaged with or without PE film (thickness: 0.011mm) before putting into the cold storage at $5^{\circ}C$. The results showed the lowest rate of rot incidence and the highest firmness with higher Vitamin C content and the best superficial appearance in the treatment of $CaCl_2$ dipping at $45^{\circ}C$ with packaging. It also showed lower pH and higher titratable acidity in the treatment However, no significant difference of SSC was found among various treatments. The results suggested that the combination of postharvest calcium dipping and packaging could result in more effective preservation for strawberry compared with the individual treatment.

• Journal of the Korean institute of surface engineering
• /
• v.11 no.1
• /
• pp.5-13
• /
• 1978

This experiment intends to study Zn-coating weight through galvanixing process. A through examination has been carried out on the change of steel-composition, galvanizing-temperature, dipping-rime, Fe-loss when other factors were regular. Activation energy needed for Fe-loss was obtained and within this sample, the best condition which has influence on coating weight was found so as to reduce Fe-loss. As Fe-loss was diminidhed, the amount of product of Dross and Zn-using amount per total products could be reduced. The results of experiments are as follow. 1. Zn-coating thickness was increased by the rising Zn-bathtemperature and was the maximum at 8-minutes dipping time. 2. The coating weight was greatly influency by Si. As in other samples, the proportion of increasing was very rate after 20minutes. If the dipping time prolonged, the increasing amounts of Fe-loss are more greatly. 3. Activation Energy needed for Fe-loss was as follows Such numerical values were most equal to those of the activation energy which had influences on the growth of ${\gamma}$-phase. Sample - I = 18,500 Cal/mole Sample - III = 22,000 Cal/mole Sample - V = 42,300 Cal/mole

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.180-183
• /
• 2003

P. wasabiae was isolated from discolored seeds of wasabi(Wasabia japonical Mtsum.) and inoculated to fresh seeds, then the effect of fungicides on suppression of diseases were determined. Emergence rate of wasabi seeds where suppressed to 52.5% by the inoculation and it reached up to 92.7% by dipping treatment of inoculated seeds ito benomyl solution. The incidence rate of black leg disease and damping off were 32.0 and 22.0%, respectively, in control treatment that sown in the soil inoculated with P. wasabiae. But dipping treatment of inoculated seeds into benomyl solution resulted in 12.0% and 10.7% in incidence rate of those two diseases, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.3
• /
• pp.95-103
• /
• 2020

In this study, the material used in the hot dip galvanizing equipment was poorly corrosion-resistant, so it was performed to solve the cost and time problems caused by equipment replacement. The theoretical calculation was performed using the DV-Xα method(Discrete Variational Local-density approximation method). The alloy (STS4XX series) of the equipment currently used has a martensite phase. Therefore, the theoretical calculation was performed by applying P4 / mmm, which is a tetragonal structure. The new alloy was chosen by designing theoretical values close to existing materials. Considering elements that contribute to corrosion, most have high prices. Therefore, the design was completed by adjusting the content using only the components of the reference material in the theoretical design. The final design alloys were chosen as D6 and D9. Designed D6 and D9 were dissolved and prepared using an induction furnace. After the heat treatment process was completed, the corrosion rate of the alloys was confirmed by using the potentiodynamic polarization test. The surface of the prepared alloys were processed horizontally and then polished to # 1200 using sand paper to perform potentiodynamic polarization test. Domestic products: 4.735 mpy (mils / year), D6: 0.9166 mpy, D9: 0.3372 mpy, alloys designed than domestic products had a lower corrosion rate. Therefore, the designed alloy was expected to have better erosion resistance.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.27-35
• /
• 2007

This experiment was carried out to investigate the appearance and surface gluing characteristics of laminated boards overlaied with teak sliced veneer, printing paper, wall paper, cotton cloth, and wool cloth, The overlaying sheets were glued on the laminated boards with polyvinyl acetate emulsion adhesives and the species for laminated boards was red pine. The obtained results are summarized as follows; in case of the teak sliced veneer overlaied boards, the appearance quality was very good and showed the first grade of KS standard. but the delamination rate was 44.0% and 895% for cold water or warm water dipping treatments, respectively, so the wet gluing properties were very bed. In the case of the paper or cloth overlaied boards, the appearance quality was same good and showed the first grade of KS standard, but their delamination rate was 10~20% and 39.3~49.0 for cold water or warm water dipping treatments, respectively, so the wet gluing properties were bed, relatively better than sliced veneer overlaied boards. The present work showed that appearance of laminated boards overlaid with several sheets appeared quite positive in terms of secondary gluing qualities of laminated boards, suggesting that sliced veneer, paper, and cloth would be appropriate for the overlaying materials of laminated boards.